Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your AZZA Cube 360 360mm All-in-One (AIO) CPU Liquid Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance of your cooling system.
Prekosyon Sekirite
Observe the following safety guidelines to prevent damage to the product or injury to yourself:
- Asire w ke sistèm òdinatè w la etenn epi debranche li nan priz miray la anvan enstalasyon oswa antretyen.
- Handle components with care to avoid electrostatic discharge. Consider using an anti-static wrist strap.
- Do not open the liquid cooler's sealed components. TampManyen ak aparèy la ka anile garanti a epi lakòz flit.
- Keep the product away from liquids and extreme temperatures.
- If any part is damaged, do not attempt to install or operate the cooler. Contact customer support.
Kontni pake
Verifye ke tout konpozan yo prezan nan pake ou a:
- AZZA Cube 360 AIO Liquid Cooler (Radiator, Pump, Tubing, and Fans pre-attached)
- Intel Mounting Bracket Kit (LGA 115X / 1366 / 1200 / 1700 / 1851)
- AMD Mounting Bracket Kit (AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1)
- Plak dèyè pou Socket Intel yo
- Vis ak Distansè pou Monte
- Pat tèmik (pre-aplike oswa nan yon tib)
- Manyèl Itilizatè (dokiman sa a)
Espesifikasyon teknik
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | LCAZ-360P-ARGB CUBE |
| Gwosè radyatè | 360mm |
| Waterblock Height | 85mm |
| Sokèt Intel konpatib | LGA 115X / 1366 / 1200 / 1700 / 1851 |
| Sokèt AMD konpatib | AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 |
| Metòd refwadisman | Liquid and Air |
| Vitès fanatik | Jiska 2000 RPM |
| Nivo bri | 34 dB (A) |
| Koule lè | 16.4 - 65.2 CFM |
| Materyèl | Copper (cold plate), Aluminum (radiator) |
| Pouvwa Connector Kalite | 3-Pin (Pump), ARGB (Fans/Pump) |
| Voltage | 5 Volts (ARGB) |
| Product Dimensions (Waterblock) | 2.76 x 3.35 x 3.09 pous |
| Pwa atik | 5.26 liv |
| Sipò ARGB | Wi |
Gid enstalasyon
Anvan w kòmanse
- Gather necessary tools: Phillips head screwdriver, thermal paste cleaner (if reapplying).
- Ensure your PC case has adequate space for a 360mm radiator.
- Identify your CPU socket type (Intel or AMD) to select the correct mounting hardware.
Eleman souview
The AZZA Cube 360 AIO Liquid Cooler consists of a radiator with three fans, a pump integrated into the waterblock, and connecting tubes. The waterblock features an 85mm tall design for efficient heat transfer.
Imaj: Plis paseview of the AZZA Cube 360 AIO Liquid Cooler, showing the 360mm radiator with three RGB fans and the distinct cube-shaped waterblock.
Etap-pa-etap Enstalasyon
- Prepare Mèr:
- For Intel sockets, install the appropriate backplate behind the motherboard.
- Install the correct standoffs onto the motherboard for your CPU socket type.
- If thermal paste is pre-applied to the cold plate, ensure it is clean and intact. If not, apply a small amount of high-quality thermal paste to the center of your CPU's integrated heat spreader (IHS).
- Enstale radyatè ak vantilatè yo:
The radiator comes with three 120mm fans pre-installed. These fans feature a vortex design for efficient airflow and quiet operation, with speeds up to 2000 RPM and noise levels of 34 dB (A).
Imaj: Yon gwo plan view of one of the cooler's fans, highlighting its vortex design and ARGB lighting. The image also indicates an airflow range of 16.4 - 65.2 CFM.
- Mount the 360mm radiator to an available fan mounting location in your PC case (typically top or front). Use the provided long screws to secure the radiator and fans to the case.
- Ensure the tubing has enough slack to reach the CPU socket without excessive tension or sharp bends.
- Mount Waterblock/Pump:
The waterblock features a patented design with the pump embedded in an aluminum alloy base, minimizing vibration and enhancing safety. It also incorporates patented rectangular radiator fins and flat water channels for improved heat dissipation.
Image: An exploded diagram illustrating the internal components of the patented water pump, including the single-piece impeller and aluminum alloy pump base.
Image: The AZZA Cube 360 AIO Liquid Cooler mounted on a motherboard, showcasing its compact waterblock and RGB lighting in an operational setup.
- Attach the correct mounting brackets for your CPU socket to the waterblock.
- Carefully align the waterblock over the CPU, ensuring the thermal paste makes even contact.
- Secure the waterblock to the motherboard using the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.
- Konekte kab:
- Connect the pump's 3-pin power cable to a CPU_FAN or AIO_PUMP header on your motherboard. Consult your motherboard manual for the correct header.
- Connect the fan power cables (typically 4-pin PWM) to available fan headers on your motherboard or a fan controller.
- Connect the ARGB (Addressable RGB) cables from the fans and pump to a compatible 5V ARGB header on your motherboard or an ARGB controller. Ensure the voltage is correct (5V, not 12V) to prevent damage.
Operasyon
Premye pouvwa sou
After completing the installation, double-check all connections. Power on your system. The fans and pump should start operating, and the ARGB lighting should illuminate. Monitor your CPU temperatures using system monitoring software to ensure proper cooling.
Kontwòl ekleraj ARGB
The AZZA Cube 360 supports ARGB lighting. If connected to a compatible motherboard header, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). If using a dedicated ARGB controller, refer to its manual for lighting adjustments.
Fan and Pump Speed
The fan and pump speeds are typically controlled via the motherboard's BIOS/UEFI settings or through motherboard-specific software. You can adjust fan curves to balance cooling performance and noise levels. The pump is designed to run at a consistent speed for optimal liquid circulation.
Antretyen
Regular maintenance helps ensure the longevity and performance of your AIO cooler:
- Netwayaj pousyè: Netwaye pousyè ki sou najwa radyatè yo ak lam vantilatè yo detanzantan avèk lè konprese. Asire w ke vantilatè yo pa ap vire pandan netwayaj la pou anpeche yo domaje.
- Enspeksyon vizyèl: Regularly inspect the tubing and connections for any signs of leaks or damage. Check the fan cables and ARGB connections for secure fitment.
- Pat tèmik: While not frequently required, if you remove the waterblock from the CPU, you must clean off the old thermal paste and apply new thermal paste before reinstallation.
Depanaj
If you encounter issues with your AZZA Cube 360 AIO cooler, refer to the following table for common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Tanperati CPU ki wo | Poor thermal paste application; Waterblock not seated correctly; Pump not running; Insufficient airflow. | Reapply thermal paste; Re-seat waterblock; Check pump power connection; Ensure fans are spinning and radiator is clear of obstructions. |
| Fanatik yo pa vire | Loose fan power cable; Fan header disabled in BIOS; Faulty fan. | Check fan power connections; Verify fan header settings in BIOS; Test fans on a different header or replace if faulty. |
| Pump Not Running (No Noise/Flow) | Loose pump power cable; Pump header disabled in BIOS; Faulty pump. | Check pump power connection (3-pin to CPU_FAN/AIO_PUMP); Verify header settings in BIOS; Contact support if pump is faulty. |
| ARGB Lighting Not Working | Loose ARGB cable; Incorrect ARGB header (e.g., 12V instead of 5V); Software issue; Faulty ARGB component. | Check 5V ARGB connections; Ensure correct header is used; Update/reinstall RGB software; Contact support if components are faulty. |
| Twòp bri | Fans running at high RPM; Air bubbles in pump; Loose fan screws. | Adjust fan curves in BIOS/software; Gently tilt case to dislodge air bubbles; Tighten fan screws. |
Garanti ak sipò
AZZA products are manufactured to high standards and undergo rigorous quality control. This product is covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please visit the official AZZA website or contact your retailer. You may find additional resources, FAQs, and contact information on the AZZA support page: www.azza.com
