Jectse M10-3 4G Portable WiFi Router User Manual

1. Pwodwi souview

The Jectse M10-3 is a portable 4G WiFi router designed to provide high-speed internet access on the go. With a maximum speed of 150Mbps, it supports various devices including desktops, laptops, tablets, and mobile phones. Its compact design and built-in 3000mAh lithium battery make it ideal for business, travel, and other multi-scenario applications, ensuring stable 4G internet connectivity in Europe, Southeast Asia, and Africa.

Imaj 1.1: Devan view of the Jectse M10-3 4G Portable WiFi Router, showcasing its compact design and indicator lights.

Image 1.2: The Jectse M10-3 router highlighting its built-in 3000mAh lithium battery, which provides extended battery life for portable use.

2. Ki sa ki nan bwat la

Tanpri verifye ke tout atik yo prezan nan pakè a:

• 1 x Jectse M10-3 Mobile Hotspot
• 1 x Manyèl Itilizatè (dokiman sa a)
• 1 x USB kab

Image 2.1: Contents of the Jectse M10-3 package, including the mobile hotspot device and its USB charging cable.

3. Enstriksyon Enstalasyon

Follow these steps to set up your Jectse M10-3 Mobile Hotspot:

3.1. Mete kat SIM la

1. Carefully remove the back cover of the mobile hotspot.
2. Locate the SIM card slot. Ensure you are inserting the SIM card into the correct slot, not the memory card slot.
3. Insert your activated 4G SIM card into the designated slot until it clicks into place.
4. Ranplase kouvèti dèyè a.

Imaj 3.1: Entèn view of the Jectse M10-3, showing the battery compartment and the SIM card slot for network connectivity. Note the default Wi-Fi credentials printed on the label: IP: 192.168.0.1, User Name: admin, Password: admin.

3.2. Limen

Press and hold the power button (usually located on the side or front) for a few seconds until the indicator lights illuminate.

3.3. Konekte ak Wi-Fi

1. On your device (laptop, tablet, mobile phone), open the Wi-Fi settings.
2. Chèche pou available Wi-Fi networks. The default SSID (network name) is typically printed on a label inside the device (refer to Image 3.1 for example: SSID: 4G WIFI_XXXX).
3. Select the network name for your Jectse M10-3.
4. Enter the Wi-Fi key (password). The default key is also printed on the label (refer to Image 3.1 for example: KLE: 1234567890).
5. Yon fwa konekte, aparèy ou an ta dwe gen aksè a entènèt.

4. Operasyon Enstriksyon

4.1. Konekte plizyè aparèy

The Jectse M10-3 can support multiple devices simultaneously, allowing you to share your 4G internet connection with laptops, tablets, and smartphones. Simply follow the Wi-Fi connection steps (Section 3.3) on each device you wish to connect.

Image 4.1: The Jectse M10-3 router demonstrating its capability to provide Wi-Fi connectivity to various devices such as tablets, laptops, and desktop computers.

4.2. Aksè a Web Entèfas Jesyon

To manage advanced settings, such as changing the Wi-Fi name (SSID) or password, access the web koòdone jesyon:

1. Ensure your device is connected to the Jectse M10-3's Wi-Fi network.
2. Louvri a web navigatè (pa egzanp, Chrome, Firefox, Edge).
3. In the address bar, type the default IP address: 192.168.0.1 (as seen in Image 3.1) and press Enter.
4. Antre non itilizatè default la: admin ak modpas: admin (as seen in Image 3.1).
5. You can now configure network settings, view connected devices, and more. It is recommended to change the default password for security.

5. Antretyen

To ensure optimal performance and longevity of your Jectse M10-3 Mobile Hotspot, consider the following maintenance tips:

• Swen batri: To prolong battery life, avoid extreme temperatures. Do not expose the device to direct sunlight for extended periods or to very cold environments. Charge the device regularly, but avoid overcharging.
• Netwayaj: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or aerosols, as they may damage the internal components.
• Depo: When not in use for extended periods, store the device in a cool, dry place. It is advisable to charge the battery to about 50% before long-term storage.
• Mizajou lojisyèl: Tcheke manifakti a regilyèman website or the device's web management interface for any available firmware updates to ensure optimal performance and security.

NAN. Depanaj

6.1. Common Connection Issues

If you are experiencing difficulty connecting to the internet, consider the following:

• SIM Card Activation/Traffic: Ensure your SIM card is activated and has an active data plan. An inactive card or one without data traffic will prevent internet access.
• Incorrect SIM Card Insertion: Verify that the SIM card is inserted correctly into the designated SIM card slot, not into a memory card slot. Refer to Section 3.1 and Image 3.1.
• Frequency Band Mismatch: The frequency band of your SIM card must match the frequency bands supported by the Jectse M10-3 router. The router supports LTE bands B1 / 3 / 7 / 8 / 20 / 28AB / 38 / 40 / 41 and UMTS bands B1 / B8. If your SIM card operates on different bands (e.g., B2, B4), it will not be able to connect to the network. Contact your mobile carrier to confirm your SIM card's frequency bands.
• Kouvèti Rezo a: Ensure you are in an area with adequate 4G network coverage from your SIM card provider.
• Rekòmanse aparèy: Try restarting the mobile hotspot and your connected device.

7. Espesifikasyon

8. Garanti ak sipò

The Jectse M10-3 Mobile Hotspot comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact Jectse customer service through the retailer where the product was purchased or visit the official Jectse websit pou enfòmasyon kontak.