Pro-Ject T2 W Turntable User Manual

1. Entwodiksyon

This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject T2 W Turntable. Please read these instructions carefully before using the device to ensure optimal performance and longevity.

2. Enstriksyon Sekirite

• Always handle the turntable with care. Avoid dropping or subjecting it to strong vibrations.
• Dekonekte ekipman pou kouran an anvan ou netwaye oswa fè nenpòt antretyen.
• Keep the turntable away from direct sunlight, heat sources, and moisture.
• Pa eseye demonte oswa repare aparèy la tèt ou. Konfye tout antretyen bay pèsonèl kalifye.
• Asire bon vantilasyon alantou inite a.

3. Pake kontni

Verifye ke tout atik ki nan lis anba a yo prezan nan pakè ou a:

• Pro-Ject T2 W Turntable
• Pwovizyon pou pouvwa
• Kouvèti Pousyè
• Plat
• Te santi Mat
• Kontrepwa
• Pwa anti-paten
• RCA Phono Kab
• Manyèl Itilizatè (dokiman sa a)

4. Enstalasyon

4.1 Debalaj ak plasman

Carefully remove all components from the packaging. Place the turntable on a stable, level surface, away from speakers to prevent feedback.

Figi 4.1: Top view of the Pro-Ject T2 W Turntable.

4.2 Enstalasyon plato

1. Place the sub-platter onto the spindle.
2. Carefully place the glass platter on top of the sub-platter.
3. Position the felt mat on the glass platter.

Figure 4.2: Detail of the platter and spindle assembly.

4.3 Tonearm Balance and Tracking Force

1. Retire pwoteksyon stylus la dousman.
2. Attach the counterweight to the rear of the tonearm. Rotate it until the tonearm is balanced horizontally.
3. Once balanced, set the tracking force by rotating the counterweight to the recommended setting for your cartridge (typically 1.8g - 2.0g for the pre-installed cartridge).

Figure 4.3: Tonearm counterweight for tracking force adjustment.

4.4 Anti-skating Adjustment

Attach the anti-skating weight to the small loop on the tonearm support. The recommended setting is usually aligned with the tracking force.

Figure 4.4: Tonearm headshell and cartridge detail.

4.5 Konekte ak yon Sistèm Odyo

The T2 W offers both wired (RCA) and wireless (Wi-Fi) connectivity. Connect the included RCA phono cable to the L/R outputs on the back of the turntable and to your amplifier's phono input. For wireless connection, refer to the separate Wi-Fi setup guide or the Pro-Ject Connect app instructions.

Figure 4.5: Rear panel connections of the T2 W Turntable.

5. Operasyon Enstriksyon

5.1 Limen/Etenyen

Connect the power supply to the turntable and a wall outlet. Use the power switch located on the underside of the plinth to turn the unit on or off.

Figure 5.1: Power switch location.

5.2 Chwazi vitès lekti a

The T2 W supports 33 1/3 and 45 RPM playback speeds. Use the speed selector switch, typically located on the plinth, to choose the appropriate speed for your record.

5.3 Jwe yon Disk

1. Mete yon dosye sou plato a.
2. Select the correct playback speed.
3. Leve bra ton an avèk levye repèkaj la.
4. Position the tonearm over the desired track on the record.
5. Desann bra a dousman avèk levye repèkaj la.
6. At the end of the record, lift the tonearm and return it to its rest.

6. Antretyen

6.1 Netwaye platin an

Use a soft, dry, anti-static cloth to clean the plinth and dust cover. For the platter, a slightly damp cloth can be used, ensuring no moisture enters the motor or electronics. Avoid harsh chemicals.

6.2 Swen Stylus

Regularly clean the stylus using a dedicated stylus brush, brushing gently from back to front. Replace the stylus when signs of wear are apparent to prevent damage to your records.

NAN. Depanaj

8. Espesifikasyon

• Modèl: T2 W
• Mak: Pro-Ject
• Dimansyon pwodwi: 21.26 x 16.14 x 11.81 pous
• Pwa atik: 13.2 liv (6 kilogram)
• Materyèl: Enjenieri bwa
• Maksimòm vitès wotasyon: 45 RPM
• Konsomasyon enèji (mòd limen): 5 wat
• Aparèy konpatib: Amplifier, Audio System, Speaker
• Karakteristik espesyal: Built-in Speaker (Note: This feature is listed in specifications but typically refers to an integrated phono stage or wireless capability, not an actual speaker for sound output from the turntable itself. Consult product details for clarification.)

9. Garanti ak sipò

Pro-Ject Audio Systems products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Pro-Ject Audio Systems websit la. Kenbe prèv acha ou a pou nenpòt reklamasyon garanti.

For further assistance, you may contact your authorized Pro-Ject dealer or distributor.