Yaheetech Queen Upholstered Bed Frame

Enfòmasyon enpòtan sou sekirite

Tanpri li epi konprann tout enstriksyon yo anvan ou monte epi itilize li. Kenbe manyèl sa a pou referans pita.

• Kapasite pwa: Pa depase kapasite pwa maksimòm lan ki se 794 liv (360 kg).
• Ajisteman tèt kabann: Be cautious when adjusting the headboard height to prevent injury. Ensure all fasteners are securely tightened after adjustment.
• Asanble: Assemble the bed frame on a soft, clean surface to prevent scratches. Ensure all parts are present before beginning assembly.
• Antretyen: Regularly check all bolts and connections to ensure they remain tight. Loose connections can lead to instability and potential injury.
• Timoun: Kenbe ti pyès ak materyèl anbalaj lwen timoun yo pou evite danje toufe.

Kontni pake

Verify that all components listed below are present before starting assembly. Refer to the assembly video for visual identification of parts.

Imaj: Eksploze view of all bed frame components, including headboard, side rails, center support bars, legs, wooden slats, and hardware. Each part is labeled for easy identification during assembly.

Lis Pati:

• A: Headboard (1 pc)
• B: Left Side Rail (1 pc)
• C1/C2: Wooden Slats (12 pcs total)
• D1/D2: Center Support Bars (2 pcs)
• E: Right Side Rail (1 pc)
• F: Headboard Support Legs (2 pcs)
• G: Center Support Leg (1 pc)
• H: Cross Support Bar (1 pc)
• I: Bed Legs (4 pcs)
• J: Headboard Brackets (2 pcs)
• K: Center Support Brackets (2 pcs)
• L: Corner Brackets (4 pcs)
• M: Side Rail Connectors (2 pcs)
• N: Footboard Connectors (2 pcs)
• O: Boulon (divès gwosè)
• P: Ronèl (divès gwosè)
• Q: Allen kle (1 pc)
• R: Vis (divès gwosè)
• S: Nuts (various sizes)

Enstriksyon Asanble

Follow these steps carefully for proper assembly. An assembly video is provided for visual guidance.

Gid etap pa etap:

1. Attach Headboard Support Legs: Securely attach the Headboard Support Legs (F) to the Headboard (A) using the provided bolts (O) and washers (P). Use the Allen wrench (Q) to tighten.
2. Rasanble ray bò yo: Connect the Left Side Rail (B) and Right Side Rail (E) to the Headboard Support Legs (F) using the Side Rail Connectors (M) and appropriate hardware. Ensure a snug fit.
3. Install Center Support Bars: Attach the Center Support Bars (D1, D2) to the side rails. Connect the Cross Support Bar (H) between the two center support bars using bolts (O) and nuts (S).
4. Attach Center Support Legs: Fasten the Center Support Leg (G) to the Cross Support Bar (H) for additional stability.
5. Install Bed Legs: Screw the Bed Legs (I) into the designated corners of the bed frame.
6. Mete planch an bwa yo: Lay the Wooden Slats (C1, C2) across the bed frame. Secure them in place using the hook & loop fasteners or screws (R) as indicated in the video. Ensure even spacing for optimal mattress support.
7. Sere final la: Double-check all bolts and screws to ensure they are fully tightened before placing the mattress on the frame.

Enstriksyon Operasyon

Tèt kabann reglabl an wotè:

The upholstered headboard can be adjusted to your preferred height. It ranges from 44.5 inches to 48.5 inches. To adjust, loosen the bolts connecting the headboard to its support legs, slide the headboard to the desired height, and then securely re-tighten the bolts. This allows for optimal comfort when reading or relaxing in bed.

Imaj: A visual representation of the headboard's height adjustment mechanism, illustrating the range of 44.5 to 48.5 inches.

Pa bezwen somye bwat:

This platform bed frame is designed to support your mattress directly, eliminating the need for a box spring. Simply place your latex, foam, or spring mattress on the wooden slats after assembly.

Antretyen

• Netwayaj: Wipe the bed frame with a dry cloth to remove dust and debris. For upholstered areas, use a soft brush or vacuum with an upholstery attachment. Avoid harsh chemicals or abrasive cleaners.
• Tèks regilye: Periodically inspect all screws, bolts, and connections to ensure they are tight. Re-tighten any loose fasteners to maintain stability and prevent squeaking.
• Underbed Space: Espas ki genyen ant 6.3 pous anba tè a pèmèt netwayaj fasil anba kabann nan, sa gen ladan aksè pou aspiratè robotik.

Imaj: A robot vacuum cleaner operating beneath the bed frame, demonstrating the convenient 6.3-inch underbed clearance for cleaning.

Depanaj

• Bri k'ap kriye: If the bed frame makes squeaking noises, check all bolts and screws. Tighten any loose fasteners. The frame is designed with EVA foam to minimize noise, but periodic checks are recommended.
• Enstabilite/Tranbleman: Ensure all connections are fully tightened. Verify that the center support legs are properly installed and making firm contact with the floor.
• Deplasman planch: Ensure the wooden slats are correctly positioned and secured by their hook & loop fasteners or screws. If any slats are damaged, contact customer support for replacements.

Espesifikasyon

Imaj: Detailed dimensions of the Yaheetech Queen Upholstered Bed Frame, including length, width, and adjustable headboard height.

Garanti ak sipò

For warranty information, replacement parts, or further assistance, please contact Yaheetech customer support. Refer to your purchase documentation for specific warranty terms and contact details.

You can also visit the official Yaheetech store for more products and support: Magazen Yaheetech