Manyèl Enstriksyon pou Teleskòp Miwa DÖRR Delta 1000 la

Entwodiksyon

This manual provides detailed instructions for the assembly, operation, and maintenance of your DÖRR Delta 1000 Mirror Telescope. The Delta 1000 is a Newton reflector telescope designed for both ambitious beginners and advanced users, featuring a D114/F1000mm optical system, a sturdy aluminum stand, and a parallactic EQ-1 mount. Please read these instructions carefully before using your telescope to ensure proper setup and optimal vieweksperyans nan.

Kontni pake

Anvan ou kòmanse asanblaj la, verifye si tout konpozan ki nan lis anba a yo nan pake ou a.

• Newton Mirror Telescope (D114/F1000mm optical tube)
• Sturdy Aluminum Tripod
• Parallactic EQ-1 Mount
• Viewfinder tube (5x24)
• Oculaires:
  • SR4mm Super-Ramsden Eyepiece
  • SR6mm Super-Ramsden Eyepiece
  • H12.5mm Huygens Eyepiece
  • H20mm Huygens Eyepiece
• 2x Barlow Lantiy
• Moon Filter
• Plato akseswa
• Kontrepwa
• Zouti pou asanble

Image: All components included in the DÖRR Delta 1000 package.

Enstriksyon Enstalasyon

Follow these steps to assemble your DÖRR Delta 1000 telescope.

1. Rasanble Tripod la

• Extend the tripod legs to a stable position.
• Attach the accessory tray to the tripod spreader bars. Ensure it is securely fastened to provide stability.

Image: Tripod assembly with accessory tray.

2. Mount the Equatorial Mount

• Place the EQ-1 equatorial mount onto the tripod head.
• Secure the mount using the provided locking screw from underneath the tripod head.
• Attach the counterweight shaft and the counterweight to the mount. The counterweight helps balance the telescope.

Image: Equatorial mount with counterweight.

3. Attach the Telescope Optical Tube

• Carefully place the telescope optical tube into the mounting rings on the equatorial mount.
• Secure the tube by tightening the screws on the mounting rings. Ensure the tube is firm but do not overtighten.

Image: Telescope optical tube mounted.

4. Enstale Chèchè a

• Slide the 5x24 viewfinder tube into its bracket on the main telescope tube.
• Tighten the small screws on the bracket to hold the finderscope in place.

Image: Finderscope installation.

5. Insert an Eyepiece

• Loosen the thumbscrews on the focuser.
• Insert the desired eyepiece (e.g., H20mm for lowest magnification) into the focuser.
• Tighten the thumbscrews to secure the eyepiece.

Image: Fully assembled telescope.

Opere teleskòp la

1. Aliman Chèchè a

The finderscope provides a wide field of view to help locate objects before observing them with the main telescope.

• During daylight, point the main telescope at a distant, stationary object (e.g., a treetop or building).
• Look through the main telescope with a low-power eyepiece (e.g., H20mm) and center the object.
• Now, look through the finderscope. Adjust the finderscope's alignment screws until the same object is centered in its crosshairs.
• This alignment ensures that whatever is in the center of your finderscope is also in the field of view of your main telescope.

2. Konsantre

Once an object is centered, turn the focuser knobs slowly until the image appears sharp.

3. Using Eyepieces and Magnification

The magnification of your telescope is determined by the focal length of the telescope divided by the focal length of the eyepiece. The DÖRR Delta 1000 has a focal length of 1000mm.

• H20mm Eyepiece: 1000mm / 20mm = agrandisman 50x. Ideyal pou chan laj views ak lokalize objè yo.
• H12.5mm Eyepiece: 1000mm / 12.5mm = 80x magnification. Good for general planetary and lunar observation.
• SR6mm Eyepiece: 1000mm / 6mm = 167x magnification. For more detailed views of planets and the Moon.
• SR4mm Eyepiece: 1000mm / 4mm = 250x magnification. For high-power observation of specific features.

Nòt: The recommended maximum useful magnification for the DÖRR Delta 1000 is approximately 228x. While higher magnifications are technically possible, atmospheric conditions often limit the clarity of images beyond this point.

Image: Included eyepieces and Barlow lens.

4. Using the 2x Barlow Lens

The 2x Barlow lens doubles the magnification of any eyepiece it is used with.

• Insert the Barlow lens into the focuser first.
• Then, insert your chosen eyepiece into the Barlow lens.
• Example Magnifications with Barlow Lens:
  • SR4mm + Barlow: 250x * 2 = 500x
  • SR6mm + Barlow: 167x * 2 = 334x
  • H12.5mm + Barlow: 80x * 2 = 160x
  • H20mm + Barlow: 50x * 2 = 100x

Remember the note about maximum useful magnification. High magnifications with the Barlow lens may result in less sharp images due to atmospheric conditions.

5. Using the Equatorial Mount (EQ-1)

The EQ-1 mount allows you to track celestial objects as they move across the night sky due to Earth's rotation.

• Polè aliyman: For accurate tracking, the mount's polar axis should be aligned with the celestial pole (near Polaris in the Northern Hemisphere). This is a more advanced step and detailed instructions can be found in dedicated astronomy guides.
• Slow Motion Controls: Use the slow-motion control cables to make fine adjustments to the telescope's position in Right Ascension (RA) and Declination (DEC) axes. This allows for smooth tracking of objects.

Image: Equatorial mount controls.

Antretyen

• Netwayaj Optik: Dust on the mirror or lenses can reduce image quality. Use a soft brush or compressed air to remove loose dust. For stubborn smudges, use a specialized optical cleaning solution and a microfiber cloth designed for optics. Avoid touching optical surfaces with bare hands.
• Depo: When not in use, store the telescope in a dry, dust-free environment. Cover the telescope with dust caps to protect the optics.
• Pati mekanik: Periodically check all screws and bolts for tightness. Do not overtighten.

Depanaj

• Imaj la twoub:
  • Adjust the focuser knobs slowly until the image is sharp.
  • Ensure the eyepiece is fully inserted and secured.
  • Check for condensation or dirt on the eyepiece or main mirror.
  • Atmospheric turbulence can cause blurring, especially at high magnifications.
• Pa ka jwenn objè yo:
  • Ensure the finderscope is properly aligned with the main telescope.
  • Start with the lowest magnification eyepiece (H20mm) for a wider field of view.
  • Practice locating bright objects like the Moon or bright stars first.
• Imaj la pa klè:
  • Ensure the dust caps are removed from both the main telescope and the finderscope.
  • High magnification eyepieces will naturally produce dimmer images.

Espesifikasyon

Garanti ak sipò

For warranty information and technical support, please refer to the documentation provided with your purchase or contact DÖRR customer service directly. Keep your proof of purchase for warranty claims.