Entwodiksyon
The Looki Hot Water Dispenser is designed to provide instant hot water for various beverages and quick meals. Featuring a 3.0-liter capacity, a touch display, and 2600W power, it offers convenience and efficiency for daily use. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your appliance.
1. Enstalasyon
1.1 Debake
Carefully remove all packaging materials from the dispenser. Ensure all components are present: the main unit, water reservoir, and drip tray. Retain packaging for future transport or storage if needed.
1.2 Plasman
Place the dispenser on a stable, flat, and heat-resistant surface, away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit. Do not place it near the edge of a countertop where it could be easily knocked over.
1.3 Ranpli Rezèvwa Dlo a
Remove the water reservoir from the back of the unit. Fill it with clean, cold tap water up to the MAX fill line (3.0L). Do not overfill. Reattach the reservoir securely to the main unit.
Image: A hand pouring water into the transparent water reservoir of the Looki Hot Water Dispenser, illustrating the filling process.
Image: The Looki Hot Water Dispenser in use, dispensing hot water into a glass, showcasing fonksyon prensipal li.
1.4 Premye Itilizasyon
Before first use, it is recommended to run a full cycle of hot water without any beverage to clean the internal components. Plug the power cord into a grounded electrical outlet. Place a large heat-resistant container under the dispenser spout. Select the highest temperature and maximum volume setting, then dispense. Discard this water. Repeat if desired.
2. Operasyon Enstriksyon
2.1 Limen/Etenyen
Peze a Sou / Off button on the touch display to power the unit on or off. The LED display will illuminate when the unit is on.
Imaj: Yon imaj detaye view of the Looki Hot Water Dispenser's LED touch display, showing various icons for temperature, volume, milk function, and cleaning, with a hand interacting with the screen.
2.2 Ajisteman Tanperati
Sèvi ak la Tanp icon on the touch display to cycle through available temperature settings (e.g., 40°C to 100°C). Select the desired temperature for your beverage or meal.
Image: The Looki Hot Water Dispenser alongside a temperature scale ranging from 0°C to 100°C, highlighting its ability to dispense water at various temperatures within 10 seconds.
2.3 Ajiste Volim
Peze a Volim icon to select the desired water volume to be dispensed. This feature helps in dispensing precise amounts of water.
2.4 Dispense Dlo Cho
Place your cup or container under the spout. Once temperature and volume are set, press the Dispense button (often indicated by a water droplet icon or a large central button) to start dispensing. The dispenser will stop automatically once the selected volume is reached.
Image: A split image comparing the traditional method of boiling water with a kettle (top) versus the instant dispensing of hot water from the Looki Hot Water Dispenser (bottom), emphasizing convenience.
2.5 Milk Function (if applicable)
If your model includes a milk function, press the Lèt icon to activate settings suitable for milk-based beverages. Refer to the display for specific instructions related to this function.
2.6 Karakteristik sekirite
The Looki Hot Water Dispenser is equipped with automatic shut-off and overheat protection. The unit will automatically turn off if the water level is too low or if it detects overheating, ensuring safe operation.
Image: A woman holding a cup of coffee next to the Looki Hot Water Dispenser, with icons below showing various uses like tea, coffee, hot chocolate, and bouillon, demonstrating versatility.
3. Antretyen
3.1 Netwayaj
Regular cleaning ensures hygiene and extends the life of your dispenser. Unplug the unit before cleaning. Wipe the exterior with a soft, damp cloth. The drip tray can be removed and washed with warm, soapy water. Rinse thoroughly and dry before reattaching.
3.2 Fonksyon Oto-Netwayaj
The dispenser features an integrated self-cleaning function. Refer to the display for the Netwaye icon. Follow the on-screen prompts to initiate the cleaning cycle. This function helps to flush out internal components.
3.3 Detartraj
Over time, mineral deposits (limescale) can build up, especially in hard water areas. The display may show a "Descaling" or "Calc" indicator. To descale, use a descaling solution specifically designed for hot water appliances, following the product's instructions. Alternatively, a mixture of white vinegar and water can be used (e.g., 1 part vinegar to 2 parts water). Fill the reservoir with the descaling solution, run a full cycle, then rinse by running several cycles with fresh water.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen dlo ki distribye. | Water reservoir empty or not properly seated. | Fill the water reservoir. Ensure it is securely placed. |
| Dlo pa cho ase. | Incorrect temperature setting. Limescale buildup. | Check temperature setting. Perform descaling. |
| "Descaling" or "Calc" indicator on. | Yo detekte akimilasyon kalkè. | Perform a descaling cycle as per maintenance instructions. |
| Inite a pa limen. | Pa branche. Pwoblèm priz kouran. | Ensure power cord is securely plugged in. Test outlet with another appliance. |
Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, tanpri kontakte sèvis kliyan.
5. Espesifikasyon
- Nimewo Modèl: LKI-Dispenser
- Mak: Looki
- Kapasite: 3.0 lit
- Wattage: 2600 Watts
- Voltage: 240 Volts
- Koulè: Nwa
- Dimansyon pwodwi: 26 x 15 x 30 cm
- Premye dat disponib: 21 septanm 2023
6. Garanti ak sipò
This Looki Hot Water Dispenser comes with a 24-mwa garanti apati dat acha a, ki kouvri domaj fabrikasyon. Tanpri konsève prèv acha ou pou reklamasyon garanti.
For technical support, troubleshooting assistance, or warranty inquiries, please contact Looki customer service. Refer to the product packaging or the Looki official websit la pou jwenn enfòmasyon kontak ki pi ajou yo.
Manufacturer: Looki
