Entwodiksyon
Welcome to the instruction manual for your new BlackZon Smyter 1/12 4WD Electric Desert Buggy. This Ready-to-Run (RTR) vehicle is designed for off-road excitement, featuring a robust 4WD shaft drivetrain, independent double wishbone suspension, and adjustable coilover shocks. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your desert buggy. Please read this manual thoroughly before operating the vehicle.
Enfòmasyon sou Sekirite
- Toujou kondui machin nan nan zòn ouvè lwen moun, bèt kay ak obstak.
- Do not operate near public roads, water, or in adverse weather conditions.
- Kenbe dwèt, cheve, ak rad ki lach lwen pati k ap deplase.
- Asire w ke batri a byen chaje anvan chak itilizasyon.
- Disconnect the battery from the vehicle when not in use and during storage.
- Use only the provided charger and battery. Improper charging can lead to fire or injury.
- Li rekòmande pou sipèvizyon yon granmoun pou itilizatè ki poko gen 14 an.
- Pwodui sa a gen pwodui chimik Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt domaj repwodiktif.
Kontni pake
Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a:
- BlackZon Smyter 1/12 4WD Electric Desert Buggy
- Transmetè kontwòl remote 2.4GHz
- Li-Ion 7.4V 1500mAh Battery w/ T-Plug connector
- USB Charger
- Optional LED Light Set
- Manyèl Enstriksyon (dokiman sa a)

Image: The BlackZon Smyter 1/12 4WD Electric Desert Buggy, ready for operation.
Enstalasyon
1. Chaje batri machin lan
Before first use, fully charge the included Li-Ion 7.4V 1500mAh battery.
- Connect the USB charger to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- Connect the Li-Ion battery to the USB charger's T-Plug connector.
- The charger's indicator light will show charging status (refer to charger's specific light indications).
- Once charging is complete, disconnect the battery from the charger. Do not overcharge.
2. Installing the Vehicle Battery
Carefully install the charged battery into the vehicle's battery compartment.
- Jwenn lòj batri a sou chasi machin lan.
- Securely place the charged Li-Ion battery into the compartment.
- Connect the battery's T-Plug connector to the vehicle's corresponding connector.
- Ensure all wires are tucked away and do not interfere with moving parts.
- Fèmen kouvèti lòj batri a byen.

Imaj: Anba view of the Smyter chassis, showing the internal components and battery placement area.
3. Enstale Batri Remote Kontwòl
The 2.4GHz remote control transmitter requires batteries (not specified in JSON, assuming standard AA or AAA).
- Louvri lòj batri a sou do a nan kontwòl remote la.
- Mete pil ki nesesè yo, respekte polarite ki kòrèk la (+/-).
- Fèmen kouvèti lòj batri a.

Imaj: Devan view of the 2.4GHz remote control transmitter for the Smyter buggy.

Imaj: Anlè view of the remote control, showing the steering wheel and various controls.
4. Binding the Remote Control
The remote control and vehicle are typically pre-bound from the factory. If re-binding is necessary:
- Ensure both the vehicle battery and remote control batteries are installed and charged.
- Turn on the remote control transmitter first.
- Then, turn on the vehicle's power switch.
- The indicator lights on both the transmitter and vehicle receiver should become solid, indicating a successful bind. If not, refer to the troubleshooting section or specific binding instructions on the remote control itself (often a small button).
Opere Veyikil la
Kontwòl debaz yo
- Volan: Rotate the wheel left or right to steer the vehicle.
- Deklanche gaz:
- Pull the trigger towards you to accelerate forward.
- Push the trigger away from you to brake, and push again for reverse.
- Vitès switch: The 2.4GHz transmitter includes a Speed Switch dial. Turn this dial to adjust the maximum speed of the vehicle. This is useful for new users or for operating in confined spaces.
- Ajisteman taye: The remote control may have trim dials for steering and throttle. Use these to fine-tune the vehicle's straight-line tracking and neutral throttle position if needed.
Konsèy Kondwi
- Kòmanse dousman pou ou ka santi kontwòl yo.
- Pratike volan ak kontwòl akseleratè nan yon espas ouvè.
- Avoid prolonged full-throttle operation, especially on rough terrain, to prevent overheating.
- The Smyter is designed for off-road use. Enjoy its capabilities on dirt, gravel, and grass.
- Utilize the illuminated roof light bar for low-light conditions, and consider installing the bonus optional LED light set for enhanced visibility.
Antretyen
Regular maintenance will extend the life and performance of your BlackZon Smyter.
Netwayaj
- After each use, especially in dirty or dusty conditions, clean the vehicle.
- Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and wheels.
- Siye kò a ak piblisiteamp twal. Evite itilize pwodwi chimik piman bouk yo.
- While the electronics are splashproof, avoid submerging the vehicle in water.
Depo
- Always disconnect the battery from the vehicle before storage.
- Store the vehicle and remote control in a cool, dry place away from direct sunlight and extreme temperatures.
- Remove batteries from the remote control if storing for extended periods.
Chèk konpozan
- Angrenaj: Periodically inspect the spur gear and pinion gear for wear or debris. The gear cover helps keep debris away.
- Sispansyon: Check the adjustable coilover shocks and independent double wishbone suspension for any damage or excessive play.
- Diferans: The 4-Gear differentials (front & rear) are robust, but occasional inspection for smooth operation is recommended.
- BEARINGS: The vehicle features a complete set of ball bearings. Ensure they spin freely and are not seized by dirt.
- Direction: Verify the dual point bell crank steering system and servo saver are functioning correctly.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Machin nan pa reyaji ak kontwòl remote la. |
|
|
| Machin nan ap mache dousman oswa yon fason ki pa konsistan. |
|
|
| Steering is off-center or unresponsive. |
|
|
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | BZN540114 |
| Echèl | 1/12 |
| Sistèm kondwi | 4WD Arbr Transmisyon |
| Kalite motè | Brushed Electric 390 Motor |
| Batri | Li-Ion 7.4V 1500mAh w/ T-Plug connector |
| Sispansyon | Independent Double Wishbone, Adjustable Coilover Shocks |
| Diferans | 4-Gear Differentials Front & Rear |
| Elektwonik | Splashproof |
| Sistèm volan | Dual Point Bell Crank with Servo Saver |
| BEARINGS | Complete Set of Ball Bearings |
| Dimansyon pwodwi | 145.67 x 98.43 x 0.39 pous |
| Pwa atik | 3.17 liv |
| Laj Rekòmande | 14 months and up (Note: RC vehicles typically have higher age recommendations for operation, this might be a general product age rating) |
Garanti ak sipò
For warranty information, technical support, or replacement parts, please contact BlackZon customer service. Refer to the product packaging or the official BlackZon websit la pou jwenn enfòmasyon kontak ki pi resan yo.
Protection plans may be available for purchase separately to extend coverage beyond the manufacturer's warranty. Please check with your retailer for details on available protection plans.