Insignia Power Manager 12-Outlet Surge Protector

Entwodiksyon

This manual provides essential information for the safe and effective use of your Insignia Power Manager 12-Outlet Surge Protector (Model: 25C25B). This device is designed to safeguard your electronic equipment from power surges, spikes, and other electrical disturbances, while also providing additional power outlets for your convenience.

Key features include a 4350-joule rating for robust protection, 12 surge-protected outlets (including 4 AC adapter-spaced and 4 always-on outlets), an 8-foot power cord with a right-angle plug for flexible placement, 58dB maximum noise filtering, an energy-saving on/off switch, and LED indicators for surge and ground status.

Image: The Insignia Power Manager 12-Outlet Surge Protector, showcasing its design and multiple outlets.

Enfòmasyon sou Sekirite

Tanpri li epi konprann tout enstriksyon sekirite yo anvan ou itilize pwodui sa a. Si ou pa swiv enstriksyon sa yo, sa ka lakòz chòk elektrik, dife, oswa domaj nan pwodui a oswa aparèy ki konekte yo.

• Itilize andedan kay la sèlman: This surge protector is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
• Evalyasyon elektrik: Do not exceed the electrical rating of the surge protector. Refer to the specifications section for details.
• Atè: Ensure the wall outlet is properly grounded. The surge protector must be plugged into a three-prong grounded outlet.
• Evite Daisy Chaining: Pa branche yon pwoteksyon kont surtansyon nan yon lòt.
• Vantilasyon: Pa bloke okenn ouvèti vantilasyon.
• Timoun ak bèt kay: Kenbe lwen timoun ak bèt kay.
• Enspeksyon: Regularly inspect the surge protector and its cord for any signs of damage. Discontinue use if damaged.

Enstalasyon

1. Dekonpoze: Carefully remove the surge protector from its packaging. Retain packaging for future storage or transport.
2. Plasman: Place the surge protector on a stable, flat surface, away from sources of water or excessive heat. The 8-foot power cord with a right-angle plug allows for flexible placement, even in tight spaces or behind furniture.
3. Konekte ak priz miray la: Plug the surge protector's power cord directly into a standard, grounded 120V AC wall outlet. Do not plug it into an extension cord or another surge protector.
4. Verifye Endikatè yo: Once plugged in, check the LED indicators on the surge protector. The 'Protected' and 'Grounded' indicators should illuminate, confirming that the unit is functioning correctly and the wall outlet is properly grounded.
5. Konekte Aparèy: Plug your electronic devices into the available outlets on the surge protector. Utilize the AC adapter-spaced outlets for larger power adapters to prevent blocking adjacent outlets.

Image: (No specific image URL provided for setup, but a visual showing the right-angle plug connected to a wall outlet would be beneficial here.)

Opere

• Aparèy alimante: Once your devices are plugged into the surge protector and the unit is connected to a wall outlet, they will receive power.
• Energy Savings On/Off Switch: Use the master On/Off switch to control power to all connected devices simultaneously. This switch allows for simple power conservation by cutting power to all devices when not in use, preventing standby power drain.
• Endikatè ki ap dirije:
  • Pwoteje LED: When illuminated, this indicates that the surge protection circuitry is active and protecting your devices. If this light goes out, the surge protection has been compromised, and the unit should be replaced.
  • Grounded LED: When illuminated, this indicates that the wall outlet is properly grounded. If this light is not on, the wall outlet may not be grounded, and you should consult a qualified electrician.
• Always-On Outlets: Four of the 12 outlets are designated as 'always-on' outlets. These outlets remain powered regardless of the state of the energy savings on/off switch, suitable for devices that require continuous power.

Image: (No specific image URL provided for LED indicators, but a close-up of the LED lights and the On/Off switch would be helpful here.)

Antretyen

• Netwayaj: Disconnect the surge protector from the wall outlet and all connected devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Echèk pwoteksyon vag: If the 'Protected' LED indicator turns off, it means the surge protection components have absorbed a significant surge and are no longer providing protection. The unit will still function as a power strip, but your devices will no longer be protected from surges. In this event, the surge protector should be replaced to ensure continued protection.
• Enspeksyon regilye: Periodically check the power cord and the surge protector housing for any signs of damage, such as fraying, cuts, or cracks. If damage is found, discontinue use immediately and replace the unit.

Depanaj

Espesifikasyon

• Nimewo Modèl: 25C25B
• Mak: Insignia
• Total Plòg pouvwa: 12 (including 4 AC adapter-spaced and 4 always-on)
• Evalyasyon pwoteksyon vag: 4350 Joules
• Filtraj bri: 58dB maksimòm
• Longè kòd pouvwa: 8 feet (with right-angle plug)
• Pwa atik: 12.7 ons
• Dimansyon pake: 13.78 x 7.32 x 2.13 pous
• Karakteristik espesyal: Energy savings on/off switch, LED indicators (Surge, Grounded)

Garanti ak sipò

For warranty information, technical support, or customer service regarding your Insignia Power Manager 12-Outlet Surge Protector, please refer to the official INSIGNIA websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la pou reklamasyon garanti.

You can typically find contact information and detailed warranty terms on the manufacturer's official support pages. Please have your model number (25C25B) available when contacting support.