X-Sense XR0B-SR

X-Sense Radon Detector (Model XR0B-SR) Instruction Manual

Your guide to accurate and continuous radon monitoring.

Entwodiksyon

The X-Sense Radon Detector (Model XR0B-SR) provides continuous monitoring of radon gas levels in your home or office. This device offers audible and visual alerts, tracks temperature and humidity, and stores historical data for comprehensive air quality assessment. It is designed for ease of use, requiring no complex installation or third-party services for long-term testing.

Enstalasyon

1. Enstalasyon batri

The X-Sense Radon Detector comes pre-installed with three AA batteries. To activate the device, remove the small plastic tab located in the battery compartment. The device is designed for low power consumption, providing up to 2 years of battery life without the need for charging or maintenance.

X-Sense Radon Detector with battery compartment open, showing three AA batteries inside and a plastic tab being removed.

Figure 1: Removing the plastic tab from the battery compartment to activate the device.

2. Plasman Aparèy

For optimal accuracy, place the radon detector in the lowest occupied room of your home. Avoid placing it near doors, windows, or areas with significant airflow that could affect readings. Ensure it is placed relatively low to the floor. Refer to the detailed specifications in the manual for precise placement guidelines.

X-Sense Radon Detector placed on a bedside table, showing its compact size and dimensions (3.8 inches D x 3 inches W x 3.2 inches H).

Figure 2: The compact X-Sense Radon Detector on a table, illustrating its small footprint.

Enstriksyon Operasyon

1. Initial Monitoring

Once activated, the device will automatically begin monitoring radon levels. The display will show "run" for both Long-Term Average (LTA) and Short-Term Average (STA) until sufficient data is collected. Reliable results are typically available within 24 hours, with 95% accuracy achieved after 7 days or more of continuous monitoring.

X-Sense Radon Detector display showing 'run' for LTA and STA, along with temperature and humidity readings.

Figure 3: Initial display showing "run" during the data collection phase.

2. Konprann Ekspozisyon an

The LCD screen provides real-time and average readings:

  • LTA (Long-Term Average): Displays the average radon concentration over an extended period (up to 999 days).
  • STA (Short-Term Average): Displays the average radon concentration over a shorter period (e.g., 24 hours or 7 days).
  • T (Temperature): Shows the average ambient temperature.
  • RH (Imidite relatif): Shows the average relative humidity.
Close-up of X-Sense Radon Detector display showing radon levels (LTA 0.40, STA 0.29), temperature, and humidity bars.

Figi 4: Detaye view of the display with radon, temperature, and humidity readings.

3. Alèt ak Notifikasyon

The device features smart safety alerts:

  • Avètisman ki tande ak vizyèl: If radon levels exceed a predefined threshold, the device will emit sound and flash a light (red for alert, yellow for fault) to notify you.
  • Low-Power Notifications: The device will alert you when battery levels are low, ensuring continuous monitoring.
X-Sense Radon Detector in a bedroom, emitting sound waves and light, with text 'Actually See & Hear - Gets your attention fast by flashing and beeping'.

Figure 5: Visual representation of the device's sound and light alerts.

4. Jesyon Done

The device stores up to 99 local reports. Use the "Report" button to save current data and the "Left/Right" buttons to review historical records. For detailed reports, scan the QR code on the back of the device to generate a PDF report of all collected data, including long-term and short-term results.

Hand pressing buttons on the top of the X-Sense Radon Detector, with a digital overlay showing 'Report 01', 'Report 02', 'Report 03'.

Figure 6: Interacting with the device buttons to manage data reports.

Antretyen

The X-Sense Radon Detector is designed for minimal maintenance. It operates on three AA batteries, which typically last up to 2 years. No charging or complex upkeep is required. When the low-power notification appears, replace the batteries to ensure continuous monitoring.

One-Touch Reset

To clear all stored data and reset the device, long-press the Reset button located at the bottom of the radon detector. This feature is useful when moving the device to a new location or starting a new monitoring period.

Close-up of the X-Sense Radon Detector's underside, showing the Reset button and battery compartment, with text 'Multiroom Monitoring - One device, one click, every room in your house under covered'.

Figure 7: Location of the Reset button for clearing data.

Depanaj

  • Alèt Wouj: Indicates high radon levels. Take immediate action to ventilate the area and investigate the source.
  • Yellow Fault: Indicates a device malfunction or an issue with the readings. Refer to the full manual for specific fault codes or contact customer support.
  • Silans Alèt: Press the button on the top of the device to temporarily silence audible alerts.
  • Lekti ki pa kòrèk: Ensure the device is placed correctly, away from drafts, and has been allowed sufficient time (at least 7 days) to establish accurate long-term averages.

Espesifikasyon

KarakteristikDetay
MakX-sans
Nimewo ModèlXR0B-SR
KoulèBlan
Sous pouvwaMache ak pil (3 pil AA enkli)
Lavi batriJiska 2 ane
Pwa atik1.04 liv
Dimansyon pwodwi3.8"D x 3"W x 3.2"H
MateryèlPC + ABS
Depo DoneUp to 99 local reports
Presizyon95% accuracy after 7 days or more

Garanti ak sipò

X-Sense offers a 60-day money-back guarantee, a 5-year quality warranty, and lifetime technical support for the Radon Detector. For assistance, please refer to the contact information provided in your product packaging or visit the official X-Sense websit.