Pro-Ject VC-S3 Premium Record Cleaning Machine User Manual

Entwodiksyon

The Pro-Ject VC-S3 is a premium record cleaning machine designed to effectively remove dirt, dust, and static from your vinyl records, ensuring optimal playback quality and longevity. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your VC-S3 unit.

Pro-Ject VC-S3 Premium Record Cleaning Machine, angled view

Imaj: Angle view of the Pro-Ject VC-S3 Premium Record Cleaning Machine, showcasing its silver finish and compact design. A record is placed on the platter with the vacuum arm positioned over it.

Karakteristik pwodwi

Superfast & super strong cleaning: Efficiently cleans records with powerful vacuum suction.
Completely dry record within 2 rotations: Designed for rapid drying, allowing immediate playback.
Big 2.5l tank for vacuumed cleaning liquid: Large capacity waste fluid tank for extended use.
Removes static load of vinyl records: Helps eliminate static electricity that attracts dust.
Removes cleaning fluid (Wash it) residue free: Ensures no residue is left on the record surface after cleaning.

Enstalasyon

Debake: Carefully remove the VC-S3 unit and all accessories from its packaging. Retain packaging for future transport or storage.
Plasman: Place the machine on a stable, level surface away from direct sunlight, heat sources, and excessive dust. Ensure adequate ventilation around the unit.
Koneksyon pouvwa: Connect the provided power cable to the VC-S3 and then to a suitable wall outlet. Ensure the power switch is in the "Off" position before connecting.
Preparasyon likid: Prepare your record cleaning fluid according to its manufacturer's instructions. Pro-Ject recommends using their "Wash it" cleaning fluid for optimal results.

Top view of Pro-Ject VC-S3 with a record on the platter

Imaj: Anwo-anba view of the Pro-Ject VC-S3, showing a vinyl record placed on the central spindle and the vacuum arm positioned to the right.

Enstriksyon Operasyon

Follow these steps for effective record cleaning:

Dosye Kote: Carefully place the record onto the spindle, ensuring it sits flat. Secure it with the record clamp.
Apply Fluid: Apply a small amount of cleaning fluid evenly across the record surface. Use a dedicated brush (not included) to gently spread the fluid.
Kòmanse motè: Flip the "MOTOR" switch to the "I" position to start the platter rotation. Allow the fluid to work for a few rotations.
Engage Vacuum: Flip the "VACUUM" switch to the "I" position to activate the vacuum suction. The vacuum arm will draw the fluid and contaminants from the record surface.
Dry Record: Allow the vacuum to operate for 1-2 rotations (approximately 2 seconds) until the record surface appears dry. For heavily soiled records, a second application and vacuum cycle may be necessary.
Sispann Operasyon: First, flip the "VACUUM" switch to "O", then the "MOTOR" switch to "O".
Remove Record: Carefully remove the record clamp and then the cleaned record.

Close-up of the motor and vacuum switches on the Pro-Ject VC-S3

Imaj: Gwo plan view of the two toggle switches on the side of the Pro-Ject VC-S3, labeled "MOTOR" and "VACUUM", indicating their on/off positions.

Antretyen

Vide tank fatra: Regularly check and empty the waste fluid tank. The tank is located at the bottom of the unit. Refer to the diagram in the full manual for exact location and removal instructions. Dispose of waste fluid responsibly.
Clean Vacuum Arm: Periodically inspect the felt strips on the vacuum arm for wear or debris. Clean them gently with a damp cloth. Replace worn strips to maintain optimal suction.
Netwayaj eksteryè: Clean the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Depo: When not in use for extended periods, disconnect the power and store the unit in a dry, dust-free environment.

Depanaj

Pwoblèm	Kòz posib	Solisyon
Record not drying completely or wet streaks remain.	Insufficient vacuum time. Worn or dirty vacuum arm felt strips. Waste tank is full. Record warpage preventing full contact.	Increase vacuum time to 2-3 rotations. Clean or replace felt strips. Empty the waste tank. Ensure record is as flat as possible; apply gentle pressure to the vacuum arm if necessary (with caution).
Machin nan pa limen.	Kab pouvwa pa konekte. Pa gen kouran nan priz la.	Tcheke koneksyon kab kouran an nan inite a ak nan priz miray la. Teste priz la ak yon lòt aparèy.
Motor or vacuum not engaging.	Switches not fully engaged. Entèn fay.	Ensure switches are firmly in the "I" position. Si pwoblèm nan pèsiste, kontakte sèvis kliyan.

Espesifikasyon

Non modèl: VC-S3
Nimewo Modèl Atik: 9120122295748
Mak: Pro-Ject
Koulè: Ajan
Dimansyon pwodwi: 20 x 18 x 18 pous (Longè x Lajè x Wotè)
Pwa atik: 19.41 liv
Sous pouvwa: Fil elektrik
Kapasite tank fatra: 2.5 lit (apeprè)

Garanti ak sipò

Specific warranty terms and detailed support contact information are not provided in this document. For warranty claims, technical support, or service inquiries, please refer to the official Pro-Ject Audio Systems websit la oubyen kontakte konsesyonè otorize ou a. Kenbe prèv acha ou a pou rezon garanti.

You can visit the official Pro-Ject store on Amazon for more information: Pro-Ject Audio Systems Store

	Enstriksyon pou Itilizasyon Machin Netwayaj Dosye Pro-Ject VC-S2 ALU a Dokiman sa a bay enstriksyon pou itilizasyon, konfigirasyon, antretyen, ak depanaj pou machin pou netwaye disk Pro-Ject VC-S2 ALU a. Li gen ladan l prekosyon sekirite, deskripsyon konpozan ak enfòmasyon sou garanti.
	Manyèl Itilizatè ak Gid Enstalasyon pou Platin Vini Pro-Ject T1, T1 Phono SB, T1 BT Enstriksyon konplè pou enstale, opere, epi kenbe platin Pro-Ject T1, T1 Phono SB, ak T1 BT ou yo. Gen ladan espesifikasyon teknik, depanaj, ak enfòmasyon sou garanti.
	Platin Pro-Ject A1: Manyèl Itilizatè, Enstalasyon, ak Espesifikasyon Enstriksyon konplè pou enstale, opere, epi kenbe platin Pro-Ject A1 ou a an bon eta. Gen ladan l espesifikasyon teknik, konsèy pou depanaj, ak enfòmasyon sou garanti.
	Platin Pro-Ject X8 B: Enstriksyon pou Itilizasyon, Enstalasyon, ak Espesifikasyon Gid konplè pou platin Pro-Ject X8 B a, ki kouvri konfigirasyon, enstalasyon, operasyon, antretyen, espesifikasyon teknik, depanaj ak enfòmasyon sou garanti.
	Manyèl Itilizatè Platin Vitès Pro-Ject A1 Enstriksyon pou itilizasyon ak konfigirasyon platin Pro-Ject A1 la, ki gen ladan espesifikasyon teknik, antretyen ak depanaj.
	Gid pou antretyen katouch phono ak stylus Pro-Ject la Aprann kijan pou pran swen katouch fono Pro-Ject ou a, tankou netwayaj stylus, netwayaj disk ak Pro-Ject Brush-it, epi ranplasman stylus. Gid sa a kouvri pati esansyèl yon katouch fono epi li bay enstriksyon pou antretyen.

Pro-Ject VC-S3 (Model 9120122295748)