Manyèl Itilizatè Bwat Odinatè Xigmatek Blade la

1. Entwodiksyon

Thank you for choosing the Xigmatek Blade ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer chassis. The Xigmatek Blade is designed for high-performance PC builds, featuring a spacious ATX structure, a stylish tempered glass side panel, and efficient cooling with pre-installed 120mm fans.

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before installing or operating the computer case. Failure to do so may result in personal injury or damage to the product.

• Always disconnect the power supply from the wall outlet before performing any installation or maintenance inside the case.
• Be aware of sharp edges inside the chassis. Handle components with care to avoid cuts.
• Wear an anti-static wrist strap when handling internal components to prevent electrostatic discharge (ESD) damage.
• Ensure proper ventilation around the case to prevent overheating.
• Keep the case away from liquids, excessive heat, and direct sunlight.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• Xigmatek Blade ATX Computer Case
• Bwat akseswa (ki gen ladan l vis, distansè, lyen kab, elatriye)
• Manyèl Itilizatè (dokiman sa a)

4. Enstalasyon ak Enstalasyon

Follow these steps for proper assembly and installation of your PC components into the Xigmatek Blade case.

4.1. Preparasyon

• Unpack the case carefully and place it on a stable, flat surface.
• Gather necessary tools: Phillips head screwdriver, cable ties (some included), anti-static wrist strap.

Figi 1: Devan view of the Xigmatek Blade ATX Computer Case, showcasing the tempered glass panel and three front-mounted RGB fans, along with a single rear RGB fan.

4.2. Enstalasyon mèr

1. Install the I/O shield into the rear opening of the case.
2. Align the motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor (Micro ATX compatible).
3. Sere kat manman an byen sere avèk vis yo bay yo. Pa sere l twòp.

4.3. Enstalasyon Inite Alimantasyon (PSU)

1. Mount the PSU into the designated rear bottom compartment.
2. Fikse PSU a ak vis nan dèyè bwat la.
3. Route the necessary power cables through the cable management cutouts.

Figi 2: Dèyè view of the Xigmatek Blade ATX Computer Case, showing the power supply mounting area, expansion slots, and the exhaust fan.

4.4. Enstalasyon Disk Depo

• Locate the 2.5" SSD/3.5" HDD drive bays.
• Install your storage drives using the appropriate screws.

4.5. Enstalasyon Kat Grafik ak Kat Ekspansyon

1. Retire kouvèti fant PCIe ki nesesè yo nan dèyè bwat la.
2. Mete kat grafik ou a oswa lòt kat ekspansyon yo nan fant PCIe kat manman an.
3. Sere kat yo ak vis.

4.6. Jesyon kab

Sèvi ak ouvèti pou kab yo ak pwen mare ki dèyè plato kat manman an pou òganize kab yo. Sa amelyore sikilasyon lè a ak estetik li.

4.7. Koneksyon Panèl Devan an

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 2.0/3.0, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

5. Operasyon

Yon fwa tout konpozan yo enstale epi kab yo konekte, ou ka limen sistèm ou an.

• Bouton pouvwa: Located on the top/front panel of the case. Press to turn on or off your PC.
• Bouton Reyajiste: Located near the power button. Press to restart your PC.
• Pò USB: Use the front USB ports for connecting peripherals.
• Pak odyo: Connect headphones and microphones to the front audio jacks.

6. Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite konpozan òdinatè w la.

• Filtè Pousyè: The Xigmatek Blade case may include removable dust filters (e.g., on the top, front, or bottom). Clean these filters regularly (monthly or bi-monthly) by removing them and washing with water or brushing off dust. Allow them to dry completely before re-installing.
• Netwayaj enteryè: Periodically use compressed air to blow dust out of the case interior, especially from fans, heatsinks, and vents.
• Netwayaj eksteryè: Siye sifas eksteryè yo ak yon mou, damp twal. Evite pwodwi chimik piman bouk yo.

NAN. Depanaj

If you encounter issues with your Xigmatek Blade case, refer to the following common troubleshooting tips:

• Pa gen pouvwa:
  • Asire w ke PSU a limen epi li byen konekte nan priz miray la.
  • Verifye ke kab switch pouvwa panèl devan an byen konekte ak tèt kat manman an.
  • Tcheke tout koneksyon pouvwa yo ak kat manman an ak konpozan yo.
• Vantilatè yo pa vire:
  • Confirm that the fan cables are securely connected to the motherboard fan headers or a fan controller.
  • Check BIOS/UEFI settings to ensure fan control is enabled and not set to a very low RPM.
• Front Panel USB/Audio Not Working:
  • Ensure the USB and audio headers from the front panel are correctly plugged into the motherboard.
  • Check your operating system's device manager for driver issues.
• Surchof:
  • Netwaye filtè pousyè yo ak konpozan entèn yo jan sa dekri nan seksyon Antretyen an.
  • Asire bon sikilasyon lè a lè w tcheke oryantasyon vantilatè a ak jesyon kab yo.
  • Consider adding more fans or upgrading your CPU cooler if temperatures remain high.

8. Espesifikasyon

Key specifications for the Xigmatek Blade Computer Case:

9. Garanti ak sipò

Xigmatek products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Xigmatek websit la. Kenbe prèv acha ou pou reklamasyon garanti.

For technical support or further inquiries, please contact Xigmatek customer service through their official channels. You can typically find contact information on the Xigmatek websit.

Note: Specific warranty details and support contact information are not provided in this general manual. Please refer to the manufacturer's official resources.