Mebus Electronic Alarm Clock Model 785871 User Manual

Entwodiksyon

This manual provides detailed instructions for the setup, operation, and maintenance of your Mebus Electronic Alarm Clock, Model 785871. Please read this manual thoroughly before using the device to ensure proper function and longevity.

The Mebus Electronic Alarm Clock is a digital, radio-controlled device designed to provide accurate time, date, and temperature readings, along with reliable alarm functions. Its modern design and clear display make it suitable for various room types, especially bedrooms.

Kontni pake

• Mebus Electronic Alarm Clock (Model 785871)
• Manyèl Itilizatè (dokiman sa a)

Remak: Pil yo pa enkli epi yo dwe achte separeman.

Enstalasyon

1. Enstalasyon batri

1. Jwenn kouvèti konpatiman pil la sou dèyè revèy la.
2. Glise oswa deklipe kouvèti a pou ouvri konpatiman an.
3. Insert the required batteries (e.g., 2 x AAA) according to the polarity indicators (+ and -) inside the compartment.
4. Ranplase kouvèti lòj batri a byen.

Important: Ensure correct battery polarity to prevent damage to the device.

2. Initial Power On and Radio Controlled Time Synchronization

Upon battery installation, the clock will power on and automatically begin searching for the radio time signal. This process may take several minutes to an hour, depending on your location and signal strength.

• Place the clock near a window or in an open area for optimal signal reception.
• A signal icon (often a radio tower or wave symbol) on the display will flash during synchronization and become solid once the time is successfully set.
• If synchronization fails, the clock will typically default to a standard time (e.g., 12:00 AM) and you may need to set the time manually (see "Setting Time Manually" in the Operating section).

Figi 1: Devan view of the Mebus Electronic Alarm Clock, showing the digital display with time, date, day, and temperature, along with control buttons.

Enstriksyon Operasyon

1. Bouton anlèview

The clock features several buttons for control. The main buttons are typically:

• SET bouton: Used to enter setting modes for time, alarm, etc. There are two 'SET' buttons, likely for different functions or for confirming settings.
• bouton MODE: Cycles through display modes or setting options.
• ▲ / ▼ buttons: Adjust values (increase/decrease) during setting modes.

Figi 2: Angle view of the Mebus Electronic Alarm Clock, highlighting the arrangement of the control buttons below the digital display.

2. Setting Time Manually (if radio control is unavailable)

1. Press and hold the appropriate SET button (refer to specific button labels on your device, often labeled "TIME SET" or similar) until the time display flashes.
2. Sèvi ak la ▲ epi ▼ bouton pou ajiste lè yo.
3. Peze a SET button again to move to minutes, then use ▲ epi ▼ pou ajiste.
4. Kontinye peze SET to cycle through other settings like year, month, and day, adjusting each with ▲ epi ▼.
5. Peze a SET button one last time or wait a few seconds for the clock to exit setting mode.

3. Mete alam la

1. Peze epi kenbe la SET button associated with the alarm function (often indicated by an alarm icon or "ALARM SET"). The alarm time will flash.
2. Sèvi ak la ▲ epi ▼ bouton yo pou mete lè alam ou vle a.
3. Peze alam la SET button again to move to minutes, then use ▲ epi ▼ pou ajiste.
4. Peze alam la SET button one last time or wait for the clock to exit setting mode.
5. To activate/deactivate the alarm, there is usually a dedicated switch or button (often on the side or back, or a quick press of an alarm SET button). Look for an alarm icon on the display to confirm activation.

4. Fonksyon repetisyon

When the alarm sounds, press the large button on the top of the clock (if present, or a designated snooze button) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes). To turn off the alarm completely, press any other button or flip the alarm switch off.

5. Display Modes and Temperature Unit Selection

• Montre mòd: Peze a MÒD button to cycle through different display information, such as time, date, and potentially other features.
• Inite Tanperati: To switch between Celsius (°C) and Fahrenheit (°F) for the temperature display, locate a small button or switch, often on the back or side of the unit, or it might be an option within the MÒD anviwònman.

Antretyen

1. Netwayaj

• Wipe the clock's exterior with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or electronic components.
• Evite ke imidite antre nan nenpòt ouvèti.

2. Ranplasman batri

• When the display dims or functions become erratic, it is time to replace the batteries.
• Follow the "Battery Installation" steps in the Setup section.
• Jete ansyen pil yo yon fason responsab selon règleman lokal yo.

Depanaj

Espesifikasyon

• Mak: Mebus
• Nimewo Modèl: 785871 (also known as Mebus 25800)
• Kalite ekspozisyon: Digital
• Style: Modèn
• Karakteristik espesyal: Alam
• Sous pouvwa: Mache ak pil (Pil pa enkli)
• Kalite chanm: Chanm
• Fòm: Square-ish
• Materyèl: Plastik
• Dimansyon: 5.12 x 2.95 x 2.13 pous (Dimansyon Pake)
• Pwa atik: 4.9 ons

Sipò

For further assistance or inquiries not covered in this manual, please refer to the Mebus official website or contact their customer support. Keep your product model number (785871) handy when seeking support.

Note: Specific contact details are not provided in this document.