1. Entwodiksyon
The OOYCYOO MPPT Solar Charge Controller 60A is an advanced device designed to manage power flow from your solar panels to your battery bank. It utilizes Maximum Power Point Tracking (MPPT) technology to optimize energy harvesting, ensuring efficient charging for 12V, 24V, 36V, and 48V battery systems. This controller automatically identifies the system voltage and is compatible with various battery types, including lead-acid and lithium.
Imaj 1.1: Devan view of the OOYCYOO MPPT Solar Charge Controller 60A, showing the LCD display and control buttons.
2. Pwodwi Features
- Teknoloji MPPT: Maksimize ekstraksyon enèji nan panno solè yo.
- Volim Sistèm Otomatiktage Idantifikasyon: Supports 12V, 24V, 36V, and 48V systems.
- Segondè efikasite: DC/DC transfer efficiency up to 98.7%.
- Ekspozisyon LCD ak ekleraj dèyè: Provides clear real-time operational data.
- Refwadisman Avanse: Scientifically designed convection cooling with integrated fan for optimal temperature management.
- 4-StagChaje batri: Includes Bulk, Boost, Float, and Equalization for efficient and safe battery charging.
- Konpatibilite plizyè batri: Supports lead-acid (sealed, gel, flooded) and lithium batteries (LFP), with user-customizable parameters.
- Pwoteksyon konplè: Multiple safety features to protect the controller and connected components.
- Negative Ground Design: Amelyore sekirite pandan operasyon.
Imaj 2.1: Plis paseview of the controller's features, including LCD display, terminals, and protection icons.
3. Safety Precautions and Protection Functions
To ensure safe operation and prevent damage, observe the following safety guidelines. The controller incorporates several protection mechanisms:
- PV Current/Power Overload Protection
- PV Short Circuit Protection
- Pwoteksyon polarite ranvèse PV
- Night Reverse Charging Protection
- Pwoteksyon polarite ranvèse batri
- Overvol batritage Pwoteksyon
- Battery Over-discharge Protection
- Pwoteksyon Batri Surchof
- Controller Overheating Protection
- Lithium Battery Low Temperature Protection
- Chaje Pwoteksyon Kout Awondisman
- Chaj Pwoteksyon Surcharge
- TVS High Voltage Pwoteksyon Transient
Always connect the battery first, then the solar panels, and finally the load. Disconnect in the reverse order.
4. Enstalasyon ak Enstalasyon
Follow these steps for proper installation of your MPPT solar charge controller:
- Montaj: Choose a dry, well-ventilated location away from direct sunlight and heat sources. Ensure adequate space around the controller for air circulation.
- Koneksyon batri: Connect the battery cables to the controller's battery terminals (labeled '+' and '-'). Ensure correct polarity. The controller will automatically detect the battery voltage. Use 10 AWG wires for power terminals.
- Koneksyon Panèl Solè: Connect the solar panel cables to the controller's PV input terminals (labeled 'SOLAR +' and '-'). Ensure correct polarity. Verify that the open circuit voltage (Voc) and power of your solar array do not exceed the controller's maximum limits for your system voltage.
- Koneksyon Chaj (Si ou vle): Connect your DC load to the controller's load terminals (labeled 'LOAD +' and '-'). Ensure correct polarity.
Image 4.1: Diagram illustrating the connection of solar panels, battery, and DC load to the MPPT controller. It also shows support for parallel connection of two 60A controllers for a total of 120A.
Imaj 4.2: Egzanpample of the MPPT Solar Charge Controller integrated into a residential solar power system, managing power for various household appliances.
Imaj 4.3: Kote view of the controller highlighting the solar, battery, and load terminals for wiring.
5. Operasyon Enstriksyon
Once connected, the controller will automatically begin operation. The LCD display provides real-time information:
- Antre PV: Montre voltage ak aktyèl soti nan panno solè yo.
- Batri: Montre batri voltage, charge status, and percentage.
- Chaj Sòti: Endike voltage and current supplied to the load.
Bouton kontwòl:
The controller features four buttons (A, B, C, D) and a SET button for navigation and parameter adjustment. Refer to the on-screen menu for specific functions. Pressing A+D for 5 seconds typically initiates a reset.
Operasyon fanatik refwadisman:
The integrated cooling fan activates automatically when the internal temperature exceeds 45°C and deactivates when the temperature drops below 40°C, ensuring optimal performance and longevity.
6. Battery Charging Methods
The OOYCYOO MPPT controller employs a 4-stage charging algorithm to optimize battery health and lifespan:
- Chaj esansyèl: Bay kouran maksimòm pou chaje batri a rapidman.
- Ranfòse Chaj: Charges the battery to a higher voltage pou asire chaj konplè.
- Chaje Flote: Kenbe batri a nan yon volim ki an sekiritetage, compensating for self-discharge.
- Egalizasyon: Periodically overcharges flooded lead-acid batteries to balance cell voltages.
Pre-set charging parameters are available for sealed, gel, flooded lead-acid, and LFP (lithium iron phosphate) batteries. Users can also customize charging parameters to suit other battery types or specific requirements.
7. Espesifikasyon
| Paramèt | Valè |
|---|---|
| Rated chaj aktyèl | 60A |
| Sistèm Voltage | 12V/24V/36V/48V Auto |
| Max. PV Open Circuit Voltage (Voc) | 160V DC |
| Maksimòm puisans PV (Sistèm 12V) | 720W (Voc ≤ 72V) |
| Maksimòm puisans PV (Sistèm 24V) | 1440W (Voc ≤ 108V) |
| Maksimòm puisans PV (Sistèm 36V) | 2100W (Voc ≤ 160V) |
| Maksimòm puisans PV (Sistèm 48V) | 2800W (Voc ≤ 160V) |
| Power Terminal Wire Size | 10 AWG |
| Tanperati Fonksyònman | 40°C (as per specification 4E+1 Degrees Celsius) |
| Dimansyon (Pake) | 35.9 x 15.2 x 6.9 cm |
| Pwa (Pakè) | 1.85 kg |
| Materyèl | Plastik |
| Kalite ekspozisyon | LCD |
| UPC | 768420064490 |
Image 7.1: Detailed table showing original battery parameters for 12V, 24V, and 48V systems, including float voltage, undervoltage protection, and maximum PV input power. Also includes PV module series connection guidelines.
Imaj 7.2: View of the internal components, highlighting the copper coil transformer and capacitance, which contribute to the controller's efficiency and stability.
NAN. Depanaj
If you encounter issues with your OOYCYOO MPPT Solar Charge Controller, consider the following general troubleshooting steps:
- Pa gen ekspozisyon/pouvwa: Check all wiring connections, especially the battery connection, for proper polarity and secure contact. Ensure the battery has sufficient charge.
- Pa gen chaj: Verify solar panel connections and ensure panels are receiving adequate sunlight. Check PV input voltage on the display. Confirm battery connections are secure.
- Kòd erè: If the LCD displays an error code, refer to the specific error message for guidance. If not listed in this manual, consult the manufacturer's support resources.
- Surchof: Ensure the controller is installed in a well-ventilated area and that the cooling fan is operating correctly. Clear any obstructions around the vents.
Pou pwoblèm ki pèsiste, kontakte sèvis kliyan.
9. Antretyen
Antretyen regilye ede asire lonjevite ak pèfòmans optimal kontwolè chaj solè ou a:
- Netwayaj: Periodically clean the exterior of the controller with a dry cloth to remove dust and debris. Ensure ventilation openings are clear.
- Tcheke Koneksyon: Annually inspect all wiring connections for tightness and corrosion. Re-tighten as necessary.
- Tcheke anviwònman an: Ensure the installation environment remains dry and free from excessive temperatures or humidity.
10. Garanti ak sipò
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or further assistance, please contact OOYCYOO customer service.
You may also find additional resources by scanning the QR code on the product label or visiting the following link: http://qr61.cn/oQXA1T/qsECN8rL
