SNIXWOO Silent Roof Racks User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your SNIXWOO Silent Roof Racks. These cross bars are specifically designed for the Audi Q5 and Audi Q5 Hybrid models from 2018 to 2025, featuring factory side rails. The design emphasizes precise compatibility, robust durability, and quiet performance to enhance your vehicle's cargo carrying capabilities.

• Konpatibilite presi: Engineered for a secure fit on Audi Q5 & Q5 Hybrid 2018-2025 with factory side rails.
• Durabilite solid: Constructed from heavy-duty steel with corrosion-resistant black powder coating for long-lasting use.
• Konsepsyon versatile: Accommodates various accessories such as ski racks, bike mounts, and watersport carriers.
• Pèfòmans trankil: Aerodynamic aluminum construction minimizes wind resistance and noise.
• Enstalasyon san pwoblèm: Designed for easy installation without drilling, featuring a clamp sistèm bloke.

2. Enfòmasyon sou Sekirite

Adhering to these safety guidelines is crucial for safe operation and to prevent damage to your vehicle or cargo.

• Limit pwa: Do not exceed the maximum weight capacity specified for your roof racks or your vehicle's roof. Refer to your vehicle's owner's manual for specific roof load limits.
• Kago an sekirite: Always ensure all cargo is securely fastened to the cross bars using appropriate tie-downs. Check tightness before driving and periodically during long trips.
• Enspeksyon regilye: Periodically check all mounting hardware and fasteners for tightness. Loose components can lead to detachment and potential hazards.
• Abitid Kondwi: Adjust driving speed and habits when carrying cargo on the roof. Increased wind resistance and a higher center of gravity can affect vehicle handling.
• Clearance: Fè atansyon ak wotè machin nan ki ogmante lè w ap antre nan garaj, nan lave machin, oswa nan zòn ki gen ti espas vid.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• Front Cross Bar (longer)
• Rear Cross Bar (shorter)
• 4 Mounting Feet/Clamps
• 2 kle
• Hex Wrench (Allen key)
• Manyèl Enstriksyon (dokiman sa a)

4. Enstalasyon ak Enstalasyon

Follow these steps carefully for proper installation. It is recommended to have a second person assist during installation.

4.1 Identify Front and Rear Cross Bars

The two cross bars are of different lengths. The pi long cross bar is for the devan of your vehicle, and the pi kout cross bar is for the dèyè. This ensures proper fit and aerodynamic performance.

4.2 Removing the Lock Cover

Image: Steps for removing the lock cover. This involves either pushing to open or using a tool to pry, then inserting a key and turning it 90 degrees anti-clockwise to unlock and remove the outer cover.

1. Louvri Kouvèti a: Gently push on the lock cover to see if it springs open. If not, carefully use a small, flat tool (like a screwdriver) to pry open the cover.
2. Mete kle: Insert the provided key horizontally into the lock cylinder.
3. Degaje Mekanis: Turn the key 90 degrees anti-clockwise to unlock the internal base mechanism.
4. Retire kouvèti: With the mechanism unlocked, carefully remove the outer cover to expose the mounting bolts.

4.3 Attaching Cross Bars to Vehicle

Image: Four-step installation process for the roof rack cross bars, showing how to attach the feet, adjust the length, secure to the vehicle's side rails, and finalize the position.

1. Prepare Mounting Feet: With the lock covers removed, loosen the internal bolts on the mounting feet using the hex wrench. This will allow the clamps to open sufficiently.
2. Position Cross Bars: Carefully place the longer cross bar on the front factory side rails and the shorter cross bar on the rear factory side rails. Position the mounting feet directly over the existing holes for OEM roof racks on your vehicle's side rails. These holes provide the optimal and most secure mounting points.
3. Ajiste longè: Adjust the length of the cross bars by sliding the ends until the clamps align perfectly with your vehicle's side rails. Ensure the cross bars are centered and parallel.
4. Fikse sou ray yo: While pressing down firmly on the cross bars to ensure they are properly seated against the side rails, begin tightening the internal hex bolts with the provided wrench. Tighten evenly on both sides until the clamps securely grip the side rails. Ensure the clamps do not slip off the rail during tightening.
5. Tighten Internal Screws: Locate and tighten the two smaller screws on the cross bars themselves. These screws prevent the load from sliding along the cross bar during transit.
6. Reinstall Lock Covers: Once both cross bars are securely fastened, replace the lock covers and turn the key 90 degrees clockwise to lock them in place. Remove the key.

5. Operasyon Enstriksyon

Proper use of your roof racks ensures safety and longevity.

• Chaje kago: Distribute weight evenly across the cross bars. Place heavier items towards the center of the vehicle.
• Fixation an sekirite: Always use appropriate straps, nets, or specialized carriers (e.g., kayak, bike, ski carriers) to secure your cargo. Ensure there is no movement or shifting of items.
• Tcheke sere: Before each trip, especially when carrying cargo, check that all mounting bolts and cargo fasteners are tight. Re-check after the first few miles of driving.
• Aerodinamik: For optimal fuel efficiency and reduced wind noise, remove the cross bars when not in use, or ensure cargo is loaded aerodynamically.

6. Antretyen

Regular maintenance will extend the life of your roof racks.

• Netwayaj: Clean the cross bars regularly with mild soap and water. Avoid abrasive cleaners that could damage the finish.
• Enspeksyon: Periodically inspect the cross bars and mounting hardware for any signs of wear, corrosion, or damage. Replace any damaged components immediately.
• Lubrifikasyon: Apply a small amount of silicone lubricant to the lock mechanisms periodically to ensure smooth operation.

NAN. Depanaj

Pwoblèm komen ak solisyon yo.

• Bri twòp van:
  • Ensure cross bars are installed correctly and are parallel.
  • Verify all covers and end caps are securely in place.
  • Check for any gaps or loose components that could cause whistling.
  • Consider adding a fairing if noise persists (not included).
• Lach anfòm:
  • Re-tighten all mounting bolts using the hex wrench. Ensure you press down on the cross bars while tightening to achieve a secure grip on the side rails.
  • Verify that the cross bars are positioned correctly over the OEM mounting points on the side rails.
• Difikilte pou fèmen/debloke:
  • Ensure the key is fully inserted and turned 90 degrees.
  • Apply a small amount of graphite lubricant to the lock cylinder if it feels stiff.
• Cargo Sliding on Cross Bars:
  • Ensure the two internal screws on the cross bars themselves are fully tightened. These prevent the load from shifting.
  • Always use appropriate cargo restraints.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information or technical support, please refer to the retailer where the product was purchased or contact SNIXWOO customer service through their official channels. Keep your proof of purchase for warranty claims.