Manyèl Itilizatè Bwat Odinatè ENDORFY Ventum 200 ARGB ATX la

1. Entwodiksyon

Thank you for choosing the ENDORFY Ventum 200 ARGB ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning the assembly process to ensure optimal performance and longevity of your system.

Figi 1.1: The ENDORFY Ventum 200 ARGB ATX Computer Case, showcasing its sleek black design with a tempered glass side panel and illuminated ARGB fans visible through the mesh front.

2. Enfòmasyon sou Sekirite

Always observe the following safety precautions to prevent injury and damage to your components:

• Disconnect the power supply from the wall outlet before installing or removing any components.
• Mete yon braslè ponyèt anti-estatik pou anpeche domaj akòz dechaj elektwostatik (ESD) sou konpozan elektwonik sansib yo.
• Handle components carefully. Avoid touching circuit boards directly.
• Ensure all cables are properly routed and secured to prevent interference with fans or other moving parts.
• Do not operate the computer case with the side panel removed unless performing maintenance or installation.

3. Pake kontni

Verifye ke tout atik sa yo enkli nan pakè ou a:

• ENDORFY Ventum 200 ARGB ATX Computer Case
• Pre-installed Stratus 120 PWM ARGB Fans (x4)
• Accessory Box (screws, cable ties, standoffs, user manual)
• Removable Dust Filters (top, front, bottom)

Figi 3.1: Yon te eksploze view of the ENDORFY Ventum 200 ARGB case, illustrating its various components including the chassis, tempered glass side panel, mesh front panel, top and bottom dust filters, and individual fans.

4. Enstalasyon ak Enstalasyon

Follow these steps for proper assembly of your computer system within the Ventum 200 ARGB case.

4.1. Removing Side Panels

To access the interior, unscrew the four thumb screws securing the tempered glass side panel. Carefully remove the panel and set it aside on a soft, flat surface to prevent scratches.

Figi 4.1: Side view of the ENDORFY Ventum 200 ARGB case, highlighting the tempered glass side panel which provides a clear view of internal components and is secured by four thumb screws.

4.2. Enstalasyon mèr

1. Install the I/O shield into the motherboard tray opening from the inside of the case.
2. Align your ATX motherboard with the pre-installed standoffs.
3. Secure the motherboard using the appropriate screws from the accessory box.

4.3. Enstalasyon Inite Alimantasyon (PSU)

1. Slide the PSU into the dedicated compartment at the bottom rear of the case.
2. Fikse PSU a ak vis nan dèyè bwat la.

4.4. Enstalasyon Disk Depo

The case supports multiple storage drives. Refer to the accessory box for specific mounting hardware for 2.5" SSDs and 3.5" HDDs.

4.5. Enstalasyon Kat Grafik ak Kat Ekspansyon

1. Retire kouvèti fant PCIe ki nesesè yo nan dèyè bwat la.
2. Mete kat grafik ou a oswa lòt kat ekspansyon yo nan fant PCIe kat manman an.
3. Sere kat yo ak vis.

Figi 4.2: Yon entèn view of the ENDORFY Ventum 200 ARGB case, demonstrating ample space for a motherboard, graphics card, and other components, with pre-installed fans providing airflow.

4.6. Jesyon kab

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables effectively. This improves airflow and aesthetics.

4.7. Enstalasyon Vantilatè ak Radyatè

The Ventum 200 ARGB supports up to 7 fans. Four Stratus 120 PWM ARGB fans are pre-installed. Additional fan and radiator configurations:

• Devan: Up to 3x 120mm or 2x 140mm fans, or up to 360mm radiator.
• Top: Up to 2x 120mm or 2x 140mm fans, or up to 240mm radiator.
• Dèyè: 1x 120mm fan.

Figi 4.3: Yon entèn view of the case with arrows indicating the various locations for fan installation, highlighting the capacity for up to 7 fans for optimal airflow.

5. Operating the ARGB Lighting

The Ventum 200 ARGB features pre-installed ARGB fans that can be controlled for customized lighting effects.

5.1. ARGB Control

The ARGB lighting can be controlled in two ways:

• Case Controller: Use the dedicated ARGB button on the top I/O panel to cycle through various lighting modes and colors.
• Lojisyèl kat manman: Connect the ARGB cable from the case's fan hub to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to synchronize and customize lighting effects.

Figi 5.1: Close-up of the top I/O panel of the ENDORFY Ventum 200 ARGB case, showing the power button, reset button, USB 3.0 ports, audio jacks, and the dedicated ARGB control button.

6. Antretyen

Regular maintenance ensures optimal performance and extends the lifespan of your computer components.

6.1. Netwayaj Filtè Pousyè

The Ventum 200 ARGB case is equipped with removable dust filters on the front, top, and bottom. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case.

• Gently pull out the filters.
• Use compressed air or a soft brush to remove accumulated dust.
• Rinse with water if necessary (ensure completely dry before reinstallation).
• Reinstall the filters securely.

Figi 6.1: A close-up detail of the fine mesh front panel, designed to ensure very good airflow while protecting the interior from dust penetration. This mesh is part of the removable filter system.

6.2. Netwayaj jeneral

Sèvi ak yon mou, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For internal cleaning, use compressed air to remove dust from components, ensuring the system is powered off and unplugged.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

7.1. Pa gen pouvwa

• Asire w ke PSU a limen epi li byen konekte nan priz miray la.
• Check all power connections to the motherboard, CPU, and graphics card.
• Verify that the front panel power switch cable is correctly connected to the motherboard's header.

7.2. Fans Not Spinning / ARGB Not Lighting Up

• Check that the fans are properly connected to the fan hub or motherboard headers.
• Ensure the fan hub is receiving power (usually via SATA power connector).
• For ARGB, verify the 3-pin 5V ARGB cable is connected to a compatible motherboard header or that the case's ARGB button is being used.

7.3. Pwoblèm surchof

• Netwaye tout filtè pousyè yo ak konpozan entèn yo.
• Asire w ke vantilatè yo oryante kòrèkteman pou yon sikilasyon lè optimal (admisyon/echapman).
• Verify that CPU cooler and GPU fans are functioning properly.
• Improve cable management to reduce airflow obstruction.

8. Espesifikasyon

Detailed technical specifications for the ENDORFY Ventum 200 ARGB ATX Computer Case.

Figi 8.1: Diagram illustrating the sleek and spacious design of the ENDORFY Ventum 200 ARGB case, capable of housing all components efficiently while maintaining a compact footprint.

9. Garanti ak sipò

ENDORFY products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official ENDORFY websit la oubyen kontakte sèvis kliyan yo dirèkteman.

• Ofisyèl Websit: www.endorfy.com
• Sipò Kliyan: Refer to the 'Support' or 'Contact Us' section on the official websit pou enfòmasyon kontak rejyonal yo.

Tanpri kenbe prèv ou achte pou reklamasyon garanti.