Manyèl Itilizatè Tournevis San Fil Parkside PAS D5 4V

1. Entwodiksyon ak pwodwi aview

The Parkside PAS D5 4V Cordless Screwdriver is a versatile tool designed for various screwing and light cutting tasks. It features a compact design and comes with a range of interchangeable attachments to suit different applications.

This screwdriver is equipped with four specialized attachments:

• Torque Attachment: Features adjustable output torque, making it ideal for precise work with small screws and delicate materials.
• Eccentric Attachment: Designed for working in confined spaces and close to edges.
• Angle Attachment: Allows access to hard-to-reach areas and corners.
• Koupe atachman: Suitable for cutting soft materials such as cardboard, textiles, leather, or other flexible materials.

This image displays the Parkside PAS D5 cordless screwdriver alongside its versatile attachments, including a torque attachment for precision, an eccentric attachment for tight spaces, an angle attachment for corners, and a cutting attachment for soft materials.

2. Enstriksyon Sekirite

Always observe the following safety precautions when using the cordless screwdriver to prevent electric shock, fire, and serious injury.

• Li Manyèl la: Familiarize yourself with all instructions and warnings before operating the tool.
• Pwoteksyon je: Always wear appropriate eye protection, such as safety goggles, to protect against flying debris.
• Zòn travay: Kenbe zòn travay ou pwòp epi byen limen. Zòn ankonbre oswa nwa yo envite aksidan.
• Anviwònman: Pa opere zouti elektrik nan atmosfè eksplozif, tankou nan prezans likid ki ka pran dife, gaz, oswa pousyè.
• Timoun ak Moun ki Pa La: Kenbe timoun yo ak moun ki t ap gade yo lwen pandan w ap opere yon zouti elektrik. Distraksyon ka lakòz ou pèdi kontwòl.
• Proper Bit Selection: Use the correct bit or attachment for the specific task. Incorrect accessories can lead to damage or injury.
• Dekonekte pouvwa: Always disconnect the tool from its power source (e.g., remove the battery or unplug the charging cable) before making any adjustments, changing accessories, or storing the tool.
• An sekirite pou pyès travay la: Sekirize pyès la ak clamps or a vise. Holding it by hand is unstable and can lead to loss of control.
• Evite twòp: Kenbe bon pye ak balans tout tan. Pa depase.
• Sere san danje: Sere zouti elektrik san fè anyen konsa pou timoun yo epi pa kite moun ki pa abitye ak zouti elektrik la oswa enstriksyon sa yo opere zouti elektrik la.

3. Pake kontni

Lè w ap debale, asire w ke tout bagay ki nan lis anba a yo la epi yo an bon kondisyon:

• Parkside PAS D5 4V Cordless Screwdriver
• 1x Torque Attachment
• 1x Eccentric Attachment
• 1x Angle Attachment
• 1x Cutting Attachment
• 26x Screwdriver Bits (25 mm)
• 2x Screwdriver Bits (50 mm)
• 1x Ekstansyon Bit
• 1x USB chaje kab
• Ka pote

Yon fèmen view of the comprehensive bit set provided with the screwdriver, featuring multiple sizes and head types (flat, Phillips, Torx, Pozidriv) for diverse screwing applications.

4. Pwodwi Features

The Parkside PAS D5 Cordless Screwdriver incorporates several features for enhanced usability and performance:

• Detantè Bit Mayetik: Equipped with a hexagonal socket for secure and quick bit changes.
• Automatic Spindle Lock: Allows for manual screwing when additional torque is needed or for initial tightening/loosening.
• Integrated LED Work Lights: Illuminates the workpiece for improved visibility in dimly lit areas.
• Rotation Indicator: LEDs indicate the selected rotation direction (right/left).
• Low Battery Charge Indicator: Bay fidbak vizyèl sou estati batri a.
• Non-slip Softgrip: Ergonomic design with a softgrip surface for comfortable and secure handling.
• Chaje USB: Convenient charging via the included USB cable.

5. Enstalasyon

5.1 Premye chaj

1. Connect the USB charging cable to the charging port on the screwdriver.
2. Plug the other end of the USB cable into a suitable USB power adapter (not included) or a powered USB port.
3. Allow the screwdriver to charge for approximately 60 minutes for a full charge. The battery indicator LEDs will show the charging status.
4. Dekonekte kab chaje a yon fwa li fin chaje nèt.

5.2 Attaching Bits and Attachments

1. Ensure the screwdriver is turned off and disconnected from any charging source.
2. To insert a screwdriver bit: Push the desired bit firmly into the magnetic bit holder until it clicks into place.
3. To attach an accessory head (torque, eccentric, angle, cutting): Align the accessory head with the screwdriver's main shaft and push it on until it locks securely. Ensure it is fully seated to prevent detachment during operation.
4. To remove a bit or attachment: Pull the bit or attachment straight out from the holder/shaft.

6. Operasyon Enstriksyon

6.1 Powering On/Off and Rotation Direction

• The screwdriver is activated by pressing the trigger switch.
• To select the rotation direction (forward for screwing, reverse for unscrewing), use the direction selector switch, typically located near the trigger. An LED indicator will confirm the selected direction.
• Lage switch deklanche a pou etenn tournevis la.

6.2 Itilizasyon Dokiman Atachman yo

• Torque Attachment: Adjust the torque setting ring to the desired level before screwing. This prevents overtightening and damage to delicate materials or screws.
• Eccentric Attachment: Use this attachment when working very close to an edge or in tight corners where the main body of the screwdriver would obstruct access.
• Angle Attachment: Ideal for reaching screws located at a 90-degree angle to the tool's body, such as inside cabinets or furniture.
• Koupe atachman: Ensure the material to be cut is soft and within the attachment's capabilities. Guide the tool steadily along the cutting line.

6.3 Manual Screwing

The automatic spindle lock allows for manual tightening or loosening of screws. If the motor stops or you need extra force, you can manually turn the screwdriver to complete the task.

6.4 dirije limyè travay

The integrated LED work light automatically illuminates when the trigger is pressed, providing visibility in poorly lit work areas.

This composite image illustrates the practical applications of the Parkside PAS D5. It shows the angle attachment reaching into a cabinet, the cutting attachment effortlessly slicing cardboard, the eccentric attachment working near an edge, and the torque attachment being used for precise screwing on a small object.

7. Antretyen

7.1 Netwayaj

• Toujou dekonekte zouti a nan kab chaje a anvan ou netwaye li.
• Siye deyò zouti a ak yon twal mou, damp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
• Kenbe ouvèti vantilasyon yo pwòp de pousyè ak debri pou anpeche yo chofe twòp.

7.2 Swen ak Depo Batri

• Store the screwdriver in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, ensure the battery is partially charged (around 50%) to prolong its lifespan. Avoid storing with a completely depleted or fully charged battery for extended periods.
• Pa ekspoze batri a nan dlo oswa dife.

NAN. Depanaj

If you encounter issues with your Parkside PAS D5 screwdriver, refer to the following common troubleshooting steps:

• Zouti pa Limen:
  • Check if the battery is sufficiently charged. Recharge if necessary.
  • Ensure the direction selector switch is not in the neutral (locked) position.
• Reduced Performance/Weak Screwing:
  • Batri a petèt pa chaje. Rechaje zouti a.
  • The bit might be worn or incorrect for the screw type. Replace with a new, appropriate bit.
  • For the torque attachment, ensure the torque setting is appropriate for the task.
• Bit or Attachment Falls Out:
  • Ensure the bit or attachment is fully inserted and locked into place.
  • Inspect the bit holder or attachment mechanism for damage.
• Surchof:
  • Pèmèt zouti a refwadi.
  • Asire fant vantilasyon yo pa bloke.
  • Evite itilizasyon kontinyèl ak travay lou san pran poz.

Si pwoblèm nan pèsiste apre ou fin eseye etap sa yo, tanpri kontakte sèvis kliyan.

9. Espesifikasyon

10. Garanti ak sipò

This product is covered by the manufacturer's standard warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For technical support, spare parts, or warranty claims, please contact the retailer where you purchased the product or refer to the contact information provided by the manufacturer, Crivit, in your product documentation.

Please have your proof of purchase and the product model number (PAS D5 / 58DPAS) available when contacting support.