Entwodiksyon
Thank you for choosing the KEPLUG 8.7-inch Wired Motion Sensor LED Ceiling Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. This product features a built-in motion and light sensor, adjustable color temperature, and multiple operating modes, designed for various indoor applications.
Image: Two KEPLUG 8.7-inch wired motion sensor LED ceiling lights, showcasing their round, flush-mount design and integrated sensor modules.
Enstalasyon ak Enstalasyon
This KEPLUG LED ceiling light is designed for hardwired installation on either ceilings or walls. Please ensure the power supply is turned off at the circuit breaker before beginning installation. It is recommended that installation be performed by a qualified electrician.
Etap Pre-Enstalasyon:
- Chwazi Tanperati Koulè: Before mounting, locate the color temperature switch on the back of the light fixture. Slide the switch to select your desired color temperature: 3000K (Warm White), 4000K (Natural White), or 6000K (Cool White). This setting cannot be changed after installation without removing the fixture.
- Rasanble zouti: Ensure you have the necessary tools, including a screwdriver, wire strippers, and electrical tape.
Etap enstalasyon:
- Enstale Support Mounting: Secure the provided mounting bracket to the ceiling or wall junction box using the screws and anchors. Ensure the bracket is firmly attached and level.
- Konekte fil elektrik: Connect the household electrical wires to the corresponding wires on the light fixture using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure all connections are secure.
- Atache aparèy limyè a: Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place. Ensure the fixture is flush against the mounting surface.
- Retabli pouvwa: Yon fwa aparèy la byen enstale, retabli kouran an nan disjonktè a.
Image: Illustration showing the mounting bracket being secured to the ceiling with screws and anchors.
Image: Hands demonstrating the easy lock installation method, showing the light fixture being twisted onto the mounting bracket.
Enstriksyon Operasyon
Your KEPLUG motion sensor LED ceiling light offers adjustable settings for optimal performance.
Mòd operasyon:
The light fixture features a slide switch on the side to select between three operating modes:
- Mòd ON: The light functions as a standard ceiling lamp, remaining continuously on. It can be controlled via your wall switch. Motion sensing is disabled in this mode.
- Mòd OFF: Limyè a etenn.
- Mòd OTO: This mode activates the motion and light sensors. The light will turn on automatically when motion is detected in low ambient light conditions.
Image: Visual representation of the three operating modes (ON, OFF, AUTO) and how they affect the light's behavior based on ambient light and motion.
Motion Sensor Functionality (AUTO Mode):
In AUTO mode, the built-in microwave motion sensor detects movement within a 120-degree angle and a range of 9-18 feet. The light will activate when motion is detected and the ambient light is low. After motion ceases, the light will remain on for a set duration before automatically turning off.
Anviwònman revèy reglabl:
The light offers three adjustable timer settings for how long it remains on after motion is no longer detected:
- 30 segonn
- 120 segonn
- 180 segonn
To adjust the timer, locate the small slide switch next to the motion sensor on the light fixture and select your preferred duration.
Image: Illustration detailing the motion sensor's detection angle and range, along with the switch for selecting the 30s, 120s, or 180s auto-off timer.
Seleksyon Tanperati Koulè:
As mentioned in the setup, the color temperature (3000K Warm White, 4000K Natural White, 6000K Cool White) is selected via a switch on the back of the fixture prior to installation.
Image: A visual comparison of the three selectable color temperatures: 3000K Warm White, 4000K Natural White, and 6000K Cool White, as emitted by the light fixture.
Antretyen
To ensure the longevity and optimal performance of your KEPLUG LED ceiling light, follow these simple maintenance guidelines:
- Netwayaj: Disconnect power to the fixture before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the light. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Enspeksyon: Enspekte aparèy la detanzantan pou wè si li gen nenpòt siy domaj oswa koneksyon ki lach. Si ou jwenn nenpòt pwoblèm, konsilte yon elektrisyen kalifye.
- Ranplasman anpoul: This fixture uses integrated LED technology, meaning the LED bulbs are not user-replaceable. The LEDs are designed for a long lifespan (over 30,000 hours).
Depanaj
If you encounter issues with your KEPLUG motion sensor LED ceiling light, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | Pa gen ekipman pou pouvwa. Mòd ki pa kòrèk la chwazi. Sufficient ambient light (in AUTO mode). | Tcheke disjonktè a ak switch miray la. Ensure the mode switch is set to 'ON' or 'AUTO'. In 'AUTO' mode, the light will only activate in low light conditions. Test in a darker environment. |
| Capteur mouvman an pa detekte mouvman. | Light is not in 'AUTO' mode. Obstriksyon nan zòn deteksyon an. Limyè anbyen twò wo. Mouvman an deyò limit/ang deteksyon an. | Ensure the mode switch is set to 'AUTO'. Retire tout objè ki bloke detèktè a view. The sensor is designed to activate in low light. If the area is bright, it will not turn on. Ensure motion occurs within the 9-18 feet range and 120-degree angle. |
| Light turns off too quickly or stays on too long. | Move anviwònman revèy. | Adjust the timer switch on the fixture to 30s, 120s, or 180s as desired. |
| Difficulty with mounting. | Mounting surface is not flat. | Ensure the ceiling or wall surface is perfectly flat for proper alignment and secure attachment of the fixture. |
Espesifikasyon pwodwi
| Karakteristik | Detay |
|---|---|
| Mak | KEPLUG |
| Non modèl | motion sensor ceiling light |
| Dimansyon pwodwi | 8.66"L x 8.66"W x 1.11"H (22cm diameter, 2.5cm thickness) |
| Pwa atik | 2.01 liv (0.91 kilogram) |
| Wattage | 18 wat |
| Klète | 1600 Lumen |
| Tanperati Koulè | 3000K (Warm White), 4000K (Natural White), 6000K (Cool White) - Adjustable |
| Sous pouvwa | AC (Fil elektrik) |
| Voltage | 110 Volts |
| Karakteristik espesyal | Adjustable Color Temperature, Energy Efficient, Motion Sensor, Timer, Water Resistant |
| Mouvman Sensor Deteksyon Ang | 120 degre |
| Ranje Deteksyon Capteur Mouvman | 9-18 pye (apeprè 3-5 mèt) |
| Kalite enstalasyon | Flush Mount |
| Materyèl | ABS plastik |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la |
| Viv lavi | Plis pase 30,000 èdtan |
| Konpozan ki enkli | Mounting Materyèl |
Image: Technical drawing illustrating the dimensions of the KEPLUG ceiling light, showing a diameter of 22cm and a thickness of 2.5cm.
Enfòmasyon sou Garanti
For detailed warranty information regarding your KEPLUG Motion Sensor LED Ceiling Light, please refer to the product packaging or contact KEPLUG customer support directly. Warranty terms and conditions may vary.
Sipò pou Kliyan
If you have any questions, require technical assistance, or need further support with your KEPLUG product, please contact KEPLUG customer service through the retailer's platform or the official KEPLUG websit. Tanpri kenbe nimewo modèl pwodwi ou a ak dat acha a disponib lè w ap kontakte sipò a.
