Pretul SOIN-101MP Mini Inverter Welder Manyèl Itilizatè

1. Entwodiksyon

Thank you for choosing the Pretul SOIN-101MP Mini Inverter Welder. This compact and lightweight welding machine is designed for shielded metal arc welding (SMAW) processes, offering higher efficiency and lower power consumption compared to conventional welders. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new welder.

Please read this manual thoroughly before operating the machine and keep it for future reference.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Soude kapab danjere. Toujou swiv prekosyon sekirite yo pou evite blesi grav oswa lanmò.

• Always wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, welding gloves, protective clothing, and safety shoes.
• Ensure adequate ventilation in the work area to avoid inhaling welding fumes.
• Protect yourself and others from electric shock. Do not touch live electrical parts. Ensure the machine is properly grounded.
• Be aware of fire and explosion hazards. Remove all flammable materials from the welding area. Have a fire extinguisher readily available.
• Arc rays can burn eyes and skin. Use proper eye and face protection.
• Do not operate the welder in wet conditions or near water.
• Dekonekte kouran an anvan ou fè nenpòt antretyen oswa ajisteman.

3. Pake kontni

Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a:

Image: The Pretul SOIN-101MP Mini Inverter Welder shown with all its included accessories: the welding machine, electrode holder cable, ground clamp cable, shoulder strap, protective welding mask, wire brush, power cable with plug, and a pack of welding electrodes.

• 1 x Pretul SOIN-101MP Mini Inverter Welder
• 1 x Electrode Holder Cable (2 m, #7 AWG / 10 mm²)
• 1 x Kl tèamp Cable (2 m, #7 AWG / 10 mm²)
• 1 x braslè zepòl
• 1 x Protective Welding Mask
• 1 x Bwòs Fil
• 1 x Power Cable with Plug
• 1 x 1 kg pack of 1/8" E6013-4 Electrodes

Image: A visual list of included accessories, detailing the ground clamp cable, electrode holder cable, strap, protective mask, wire brush, power cable, and electrodes.

4. Pwodwi souview

Familiarize yourself with the main components of your Pretul SOIN-101MP welder:

Imaj: Yon imaj detaye view of the welder, highlighting key components such as the electronic current adjustment control, power cable input, on/off switch, and quick-change terminals.

• Electronic Control for Current Adjustment: Digital display and knob for precise ampanviwònman epòk.
• Pouvwa kab Antre: Connection point for the main power supply.
• Bouton On/Off: Main power control for the unit.
• Quick-Change Terminals (Bornes): 3/8" terminals for connecting the electrode holder and ground clamp câbles.
• Refwadisman fanatik: Located internally to prevent overheating.

5. Enstalasyon

1. Plasman: Place the welder on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure there is sufficient space around the unit for air circulation.
2. Konekte tè Clamp: Konekte tè a clamp cable to the appropriate quick-change terminal on the welder. Securely attach the ground clamp to the workpiece or a clean, bare metal part of the welding table, ensuring good electrical contact.
3. Konekte Detantè Elektwòd la: Connect the electrode holder cable to the other quick-change terminal on the welder. Insert the desired electrode into the electrode holder.
4. Koneksyon pouvwa: Ensure the welder's ON/OFF switch is in the "OFF" position. Plug the power cable into a grounded 127 V, 1-phase power outlet.
5. Ekipman Pwoteksyon Pèsonèl (PPE): Before turning on the welder, put on all necessary PPE, including your welding helmet, gloves, and protective clothing.

6. Operasyon Enstriksyon

1. Limen: Flip the ON/OFF switch to the "ON" position. The digital display will illuminate.
2. Ajiste Kouran: Use the current adjustment knob to set the desired amperage. The digital display will show the selected current. Refer to the electrode manufacturer's recommendations for appropriate current settings.
3. Seleksyon elektwòd: This welder is designed for shielded metal arc welding (SMAW) and is compatible with the following electrode types:
   • 6013 (Up to 1/8")
   • 6011 (Up to 1/8")
   • 7018 (Up to 3/32")
   

   Image: A chart illustrating compatible electrode types (6013, 6011, 7018) and their recommended sizes for 1-phase operation with the SMAW process. It also indicates N/A for TIG tungsten.

4. Kòmanse soude: With the electrode in the holder and the ground clamp attached, strike an arc on the workpiece. Maintain a consistent arc length and travel speed for optimal weld quality.
5. Apre soude: After completing the weld, turn off the welder. Allow the machine to cool down before storing. Clean the workpiece and remove any slag.

7. Antretyen

Antretyen regilye asire lonjevite ak pèfòmans optimal soudeur ou a.

• Netwayaj: Periodically clean the exterior of the welder with a dry, soft cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
• Enspeksyon kab: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damaged insulation. Replace any damaged cables immediately.
• Verifikasyon Tèminal: Ensure the quick-change terminals are clean and free of corrosion. Tighten connections as needed.
• Depo: Store the welder in a dry, clean environment, away from direct sunlight and extreme temperatures.

NAN. Depanaj

9. Espesifikasyon

Image: The Pretul SOIN-101MP welder with dimensions indicated: 18 cm height, 25 cm depth, and 10 cm base width.

Karakteristik teknik:

Image: A list of technical features including IGBT Inverter, Thermal Protect, Arc Force, Anti Stick, Hot Start, and Lift TIG, with brief descriptions.

• Teknoloji Envèstisè IGBT: Allows operation at any current level, providing stable and efficient welding.
• Thermal Protect: Thermal protection against overload, automatically shutting down the unit to prevent damage.
• Fòs arc: Adjusts the optimal arc value and allows welding in different positions.
• Anti Stick: Prevents overheating and sticking of the electrode to the workpiece.
• Cho kòmanse: Facilitates arc ignition, making it easier to start welding.
• Leve TIG: Facilitates arc ignition with the TIG process (Note: This model is primarily for SMAW, TIG functionality may require additional accessories not included).

10. Garanti ak sipò

For warranty information and technical support, please refer to the documentation included with your product or contact Pretul customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, you may visit the official Pretul brand store on Amazon: Pretul Store