Entwodiksyon
This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear Electric Standing Desk. Please read this manual thoroughly before use to ensure proper function and safety. Keep this manual for future reference.
Enfòmasyon sou Sekirite
Prekosyon Sekirite Enpòtan:
- Assemble the desk in a stable location.
- Do not exceed the desk's maximum weight capacity of 80kg.
- Kenbe timoun ak bèt kay lwen biwo a pandan w ap opere.
- Asire w pa gen okenn obstak nan chemen mouvman biwo a (ni monte ni desann).
- Pa chita oswa kanpe sou biwo a.
- Dekonekte pouvwa anvan netwaye oswa antretyen.
- If any unusual noise or movement occurs, stop operation immediately and consult the troubleshooting section or contact customer support.
Karakteristik pwodwi
- Segondè rezistans: Tested for 50,000 lift cycles, featuring aerospace-grade lifting column connectors for stability.
- Enhanced Motor Performance: Robust frame and reinforced motor provide superior load capacity and lifting power, supporting up to 80kg.
- Wotè reglabl: Seamless height adjustment from 72cm to 118cm. Ideal for switching between sitting and standing positions.
- Prereglaj memwa: Store up to 4 preferred height settings for quick adjustments.
- Low VOC Coating: Constructed with low Volatile Organic Compound (VOC) paint, meeting EPA and CARB emission standards for a healthier indoor environment.
- Operasyon trankil: Smooth and quiet lifting mechanism minimizes distractions.
- Jesyon kab entegre: Includes cable ties and a cable hole cover for an organized workspace.
- Accessory Hook: Convenient hook for hanging bags or headphones.
Kontni pake
Tanpri verifye ke tout konpozan yo prezan anvan ou kòmanse asanblaj la.
Imaj: All components of the ErGear Electric Standing Desk laid out for assembly.
Enstriksyon Asanble
Follow these steps carefully to assemble your ErGear Electric Standing Desk. A detailed assembly video is provided below to guide you through the process.
Videyo: Comprehensive assembly guide for the ErGear Electric Standing Desk.
Step 1: Attach the Lifting Frame
As shown in the video from 0:06 to 0:17, secure the lifting frame components using the provided screws. Ensure all connections are tight and stable.
Imaj: Illustration of attaching the desk legs to the main frame.
Step 2: Install the Brackets and Transmission Rod
Refer to the video from 0:17 to 0:43. Insert the transmission rod into the left lifting frame and secure the brackets. Ensure the left and right lifting frames are at the same height. If adjustment is needed, rotate the transmission rod clockwise to lower the left leg frame, or counter-clockwise to raise it.
Step 3: Attach the Desktop and Controller
Watch the video from 0:43 to 1:04. Carefully place the desktop onto the assembled frame. Secure it using the provided screws. Attach the control panel to the underside of the desktop.
Etap 4: Konekte Câbles
The video segment from 1:04 to 1:12 demonstrates connecting all necessary cables to the control unit and motor. Use the provided cable management clips to keep cables tidy and prevent entanglement.
Imaj: Cable management clips used to organize power and control cables.
Step 5: Install Cable Hole Covers
As shown in the video from 1:12 to 1:16, insert the cable hole covers into the designated openings on the desktop for a neat finish and to protect cables.
Imaj: The fully assembled ErGear Electric Standing Desk, ready for use.
Enstriksyon Operasyon
Ajiste Wotè
- Connect the desk to a power outlet.
- Sèvi ak la Up (∧) epi Down (∨) buttons on the control panel to manually adjust the desk height. The current height will be displayed on the panel.
Imaj: Close-up of the control panel with height adjustment buttons and memory presets.
Sèvi ak Prereglaj Memwa
- Ajiste biwo a nan wotè ou vle a avèk bouton Monte/Desann yo.
- Peze a "M" bouton an, answit peze youn nan bouton nimewote yo (1, 2, 3, oswa 4) within 3 seconds to save the current height.
- Pou sonje yon wotè ki anrejistre, tou senpleman peze bouton nimewote ki koresponn lan (1, 2, 3, oswa 4). The desk will automatically move to the stored position.
Imaj: The control panel highlighting the memory preset buttons (1, 2, 3, 4).
Antretyen
- Netwayaj: Siye sifas biwo a ak ankadreman an avèk yon twal mou.amp twal. Evite pwodui netwayaj abrazif oswa solvan.
- Jesyon kab: Regularly check cables for wear or damage. Ensure they are properly secured to prevent snagging during height adjustments.
- Lubrifikasyon: The lifting mechanism is designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by customer support.
- Enspeksyon: Enspekte tout vis ak koneksyon yo detanzantan pou asire yo rete sere.
Depanaj
Si ou rankontre nenpòt pwoblèm ak Biwo Kanpe Elektrik ErGear ou a, tanpri al gade solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Biwo a pa deplase. | Power cable disconnected, motor error, or overload. | Check power connection. Reduce weight on the desk. Unplug for 10 minutes, then plug back in to reset. |
| Uneven height adjustment. | Transmission rod not properly installed or adjusted. | Refer to Step 2 of assembly instructions to adjust the transmission rod. |
| Desk makes unusual noise. | Loose screws or internal component issue. | Tcheke tout vis ak koneksyon yo. Si bri a pèsiste, kontakte sèvis kliyan. |
| Prereglaj memwa yo pa fonksyone. | Pwosedi pou sove ki pa kòrèk. | Ensure you press "M" then the number button within 3 seconds to save. |
If the problem persists after attempting these solutions, please contact ErGear customer support.
Espesifikasyon
- Mak: ErGear
- Modèl: EGESD4/5/6 Series
- Koulè: Vintage (Desktop) / Black (Frame)
- Gwosè: 120 x 60 cm
- Dimansyon pwodwi: 120 (Depth) x 60 (Width) x 72-118 (Height) cm
- Kapasite pwa: 80 kg
- Ranje Ajisteman Wotè: 72 cm a 118 cm
- Desk Type: Kanpe Biwo
- Materyèl de baz: Metal
- Fini Kalite: Pentire
- Karakteristik espesyal: Wotè reglabl fonksyon
- Kalite chanm: Biwo
Garanti ak sipò
Your ErGear Electric Standing Desk comes with a Garanti manifakti 2 zan. For warranty claims, technical support, or any inquiries, please contact ErGear customer service through your purchase platform or visit the official ErGear store.
Vandè: BSQ Official JP
Pou plis sipò, tanpri vizite ErGear Store on Amazon.
