Pwodwi souview
The Steinberg 100 Series Basin Mixer Faucet (Model 1001010S) is a high-quality single-lever faucet designed for basin installation. It features a modern matte black finish and is constructed from durable brass. This faucet is designed for standing installation and includes a fixed spout, a ceramic cartridge, and flexible G 3/8" connection hoses. It is compatible with instantaneous water heaters from 21 kW.
Image: The Steinberg 100 Series Basin Mixer Faucet in matte black, showcasing its sleek design and single-lever operation.
Kontni pake
Tanpri asire w ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:
- 1 x Steinberg 100 Series Basin Mixer Faucet (Model 1001010S)
- 2 x Flexible connection hoses (G 3/8")
- Materyèl pou monte (nwa, rondelle, sele)
- Enstriksyon enstalasyon yo
Enstalasyon ak Enstalasyon
Professional installation is recommended. Before installation, ensure the water supply is turned off. This faucet requires a single tap hole for mounting.
Zouti obligatwa (pa enkli):
- Kle reglabl
- Tournvis
- Tep selan (tep PTFE)
- Bucket and cloth for spills
Etap enstalasyon:
- Prepare the Basin: Ensure the mounting surface is clean and dry. The basin should have a single tap hole with a diameter suitable for the faucet's base.
- Konekte kawotchou: Screw the flexible G 3/8" connection hoses into the base of the faucet. Hand-tighten first, then use a wrench for a snug fit, being careful not to overtighten.
- Monte tiyo a: Insert the faucet's threaded rod and hoses through the tap hole in the basinAnba b laasin, slide the rubber washer, metal washer, and then the mounting nut onto the threaded rod.
- Fikse Robine a: Align the faucet correctly on the basin and tighten the mounting nut securely with a wrench.
- Konekte ak rezèv dlo a: Connect the flexible hoses to the hot and cold water supply lines. Use sealant tape on the threads of the supply lines for a watertight seal. Ensure the hot and cold connections are correct (typically red for hot, blue for cold).
- Tcheke pou fwit: Slowly turn on the main water supply. Check all connections for leaks. If leaks are present, tighten the connections slightly.
Image: Technical drawing illustrating the dimensions and installation requirements of the Steinberg 100 Series Basin Mixer Faucet, including spout length and overall height.
Enstriksyon Operasyon
The Steinberg 100 Series Basin Mixer Faucet features a single lever for controlling both water flow and temperature.
- Koule dlo: Leve levye a anlè pou ogmante koule dlo a. Pouse l anba pou diminye koule a epi fèmen dlo a.
- Kontwòl Tanperati: Move the lever to the left for hot water and to the right for cold water. The ceramic cartridge ensures smooth and precise temperature adjustment.
The integrated aerator ensures a soft, splash-free water stream and helps conserve water.
Antretyen ak Swen
To ensure the longevity and appearance of your Steinberg faucet, follow these care instructions:
- Netwayaj: Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for bathroom fixtures. Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can damage the matte black finish.
- Siye: After cleaning, always dry the faucet thoroughly with a soft, dry cloth to prevent water spots and mineral buildup.
- Antretyen Aeratè: If water flow becomes weak or uneven, the aerator may be clogged with mineral deposits. Unscrew the aerator from the spout, clean it under running water, and remove any debris. Reinstall the aerator securely.
- Katouch seramik: The ceramic cartridge is designed for long-lasting, drip-free performance. If you experience persistent dripping or difficulty in adjusting temperature, it may indicate a need for cartridge replacement. This should be performed by a qualified professional.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Ba Dlo Koule | Clogged aerator; partially closed shut-off valves; kinked supply hose. | Clean or replace aerator; fully open shut-off valves; straighten supply hose. |
| Koule nan baz la | Loose mounting nut; damaged seal. | Tighten mounting nut; inspect and replace seals if damaged. |
| Ap koule nan ti bouch la | Katouch seramik ki chire. | Kontakte yon plonbye kalifye pou ranplase katouch la. |
| Pwoblèm Tanperati Dlo | Incorrect hot/cold connections; issue with water heater. | Verify hose connections; check water heater functionality. |
If the problem persists after attempting these solutions, please contact Steinberg customer support or a qualified plumber.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | 1001010S |
| Mak | Steinberg |
| Koulè | Matt Nwa |
| Materyèl | Kwiv |
| Style | Single levye mixer |
| Metòd enstalasyon | Single Hole (Standing) |
| Wotè an jeneral | 150 mm |
| Spout Reach (Projection) | 100 mm |
| Zòn Konfò | 50 mm |
| Katouch Kalite | Seramik |
| Tiyo Koneksyon | 2x Flexible G 3/8" |
| To koule (nan 3 bar) | 6 l/min |
| Konpatibilite | Suitable for instantaneous water heaters from 21 kW |
| Dimansyon pwodwi | 7.5 x 18.5 x 29.5 cm |
Enfòmasyon sou Garanti
Steinberg products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Steinberg website. Typically, warranty covers manufacturing defects under normal use and service.
Tanpri konsève prèv acha ou a pou nenpòt reklamasyon garanti.
Sipò pou Kliyan
For technical assistance, spare parts, or any questions regarding your Steinberg 100 Series Basin Mixer Faucet, please contact Steinberg customer support.
Websit: www.steinberg-armaturen.de
When contacting support, please have your model number (1001010S) and purchase date ready.
