1. Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your FSP Dagger Pro 850W SFX Power Supply. The FSP Dagger Pro series is designed for small form factor (SFX) systems, offering high efficiency and reliable power delivery for demanding components.
Key features of the FSP Dagger Pro 850W SFX Power Supply include:
- ATX 3.1 / PCIe 5.1 Compliance: Equipped with a native 12VHPWR connector and cable, supporting the latest generation hardware power demands.
- Konsepsyon konplètman modilè: Allows for connecting only necessary cables, improving airflow and reducing cable clutter within compact PC builds.
- Compact SFX Form Factor: Compatible with most Mini-ITX and Micro ATX cases, ideal for small form factor PCs.
- 80 PLUS Gold Certified Efficiency: Achieves over 90% efficiency at typical loads, contributing to lower power consumption, reduced heat output, and quieter operation.
- Single +12V Rail Design: Provides full power to VGA cards individually, preventing overloading conditions.
Image 1.1: FSP Dagger Pro 850W SFX Power Supply, showcasing its compact design and modular cable interface.
2. Enfòmasyon sou Sekirite
WARNING: Improper installation or use can result in serious injury or damage to equipment. Please read and follow all instructions carefully.
- Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply.
- Pa ouvri inite ekipman pou pouvwa a. Gwo vòltajtagGen pyès anndan, epi pa gen okenn pyès itilizatè a ka repare. Lè w louvri aparèy la, garanti a ap anile.
- Ensure the power supply is installed in a well-ventilated area. Do not block any ventilation openings.
- Use only the modular cables provided with this power supply. Using third-party cables may cause damage to the PSU or connected components.
- This product is designed for use in computer systems. Do not use it for any other purpose.
- Keep the power supply away from water, moisture, and extreme temperatures.
3. Pake kontni
Verifye ke pake ou a gen atik sa yo:
- FSP Dagger Pro 850W SFX Power Supply Unit
- Modular Cable Set (including 12VHPWR, Motherboard 24-pin, CPU 8-pin, PCIe 6+2-pin, SATA, Peripheral)
- AC pouvwa kòd
- Montaj Vis
- Manyèl Itilizatè (dokiman sa a)
Image 3.1: Illustration of the compact dimensions of the Dagger Pro PSU and the included modular cable set.
4. Enstalasyon ak Enstalasyon
Follow these steps to install your FSP Dagger Pro 850W SFX Power Supply into your computer system.
4.1. Enstalasyon Fizik
- Prepare sistèm ou an: Ensure your computer is powered off and the power cord is disconnected from the wall outlet. Open your computer case to access the power supply mounting area.
- Remove old PSU (if applicable): If replacing an existing power supply, disconnect all cables from components and remove the old PSU from the case.
- Mount the new PSU: Carefully place the FSP Dagger Pro 850W into the SFX power supply bay of your case. Secure it using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow, typically facing inwards or downwards depending on case design.
Image 4.1: The FSP Dagger Pro PSU mounted in a system, highlighting the rear power switch and AC input.
4.2. Koneksyon kab
The Dagger Pro 850W is a fully modular power supply. Connect only the cables required for your system components.
Imaj 4.2: Detaye view of the modular cable connection panel on the PSU.
- Motherboard Power (24-pin): Connect the 24-pin ATX cable from the PSU to the corresponding port on your motherboard. Ensure it clicks into place.
- CPU Power (4+4-pin or 8-pin): Connect the CPU power cable(s) from the PSU to the CPU power connector(s) on your motherboard. High-end motherboards may require two 8-pin connectors.
- PCIe Power (6+2-pin or 12VHPWR):
- For graphics cards requiring 6-pin or 8-pin PCIe connectors, use the provided 6+2-pin cables.
- For NVIDIA RTX 40 series graphics cards or other GPUs requiring the new 12VHPWR connector, use the dedicated 12VHPWR cable. Ensure it is fully seated into both the PSU and the graphics card.
Image 4.3: The 12VHPWR connector on the Dagger Pro PSU, designed for modern high-power graphics cards.
- Pouvwa SATA: Konekte kab kouran SATA yo ak SSD, HDD, ak lektè optik ou yo.
- Peripheral Power (Molex): Connect peripheral power cables for case fans, fan controllers, or other accessories that use Molex connectors.
- Jesyon kab: Chemen kab yo byen pou amelyore sikilasyon lè a ak estetik andedan bwat ou a.
5. Operasyon Enstriksyon
Once all components are connected and secured, you can power on your system.
- Konekte AC Power: Plug the AC power cord into the power supply's inlet and then into a wall outlet or surge protector.
- Limen PSU a: Flip the power switch on the back of the power supply to the "ON" (I) position.
- Sistèm pou limen: Peze bouton pouvwa a sou bwat òdinatè w la.
5.1. Fan Operation (Semi-Fanless Mode)
The FSP Dagger Pro 850W features a semi-fanless design for optimized low-noise operation. The fan will remain off (0dBA) under low load conditions (typically below 20% load or <25°C internal temperature). As the load increases, the fan will gradually spin up to maintain optimal temperatures, ensuring quiet operation when not under heavy demand.
Image 5.1: Fan operation curve illustrating the semi-fanless mode for reduced noise at low loads.
6. Antretyen
Bon antretyen asire lonjevite ak pèfòmans optimal ekipman pou pouvwa ou a.
- Netwayaj: Periodically clean the exterior of the power supply and its fan grill to prevent dust buildup. Use compressed air to gently clear dust from the fan and vents. Always disconnect the power cord before cleaning.
- Airflow: Ensure that the power supply's intake and exhaust vents are not obstructed. Maintain good airflow within your computer case to prevent overheating.
- Enspeksyon kab: Occasionally check all cable connections to ensure they are secure and free from damage.
NAN. Depanaj
If you encounter issues with your FSP Dagger Pro 850W power supply, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Sistèm pa limen. |
|
|
| Sistèm nan limen men li fèmen imedyatman. |
|
|
| Fanatik pa vire. |
|
|
If the problem persists after trying these solutions, please contact FSP customer support.
8. Espesifikasyon
Detailed specifications for the FSP Dagger Pro 850W SFX Power Supply (SDA2-850-G5):
| Karakteristik | Detay |
|---|---|
| Non modèl | SFX PSU |
| Nimewo Modèl Atik | SDA2-850-G5 |
| Faktè fòm | SFX |
| Sòti Wattage | 850 Watts |
| Sètifikasyon 80 PLUS | Lò |
| Estanda ATX | ATX 3.1 |
| PCIe Standard | PCIe 5.1 (with native 12VHPWR) |
| Modularite | Modilè konplè |
| Metòd refwadisman | Air (92mm fan, semi-fanless) |
| Dimansyon pwodwi (L x W x H) | 5 x 4 x 2.5 pous (125 x 100 x 63.5 mm) |
| Pwa atik | 4.51 liv (2.05 kilogram) |
| Aparèy konpatib | Computer, PC |
| Manifakti | FSP Group U.S.A |
Image 8.1: Explanation of the single +12V rail design for stable power to VGA cards.
9. Garanti ak sipò
The FSP Dagger Pro 850W SFX Power Supply comes with a Garanti manifakti 10 zan, asire fyab alontèm ak trankilite lespri. Garanti sa a kouvri domaj nan materyèl ak nan atizan konn fè anba itilizasyon nòmal.
For technical support, warranty claims, or further assistance, please visit the official FSP websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe prèv acha ou a pou validasyon garanti a.
FSP Official Websit: https://www.fsplifestyle.com/
