Entwodiksyon
Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.
Enfòmasyon sou Sekirite
- Always keep the glue gun away from children.
- Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
- Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
- Asire w ke zòn travay la byen vantile.
- Do not leave the hot glue gun unattended when it is powered on.
- Unplug or power off the glue gun when not in use or before performing any maintenance.
- Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
- Allow the equipment to cool down completely before packing it away.
- This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.
Kontni pake
Tanpri verifye sa ki nan pake a pou asire w tout atik yo la epi yo pa domaje:
- 1 x WORKPRO 3.6V Cordless Hot Glue Gun
- 20 x Mini Glue Sticks (0.27" Dia)
- 1 x tip-C chaje kab
- 1 x Manyèl Itilizatè (dokiman sa a)
Pwodwi souview
Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:
- Bouch: Dispenses melted glue.
- ON / OFF switch: Limen epi etenn aparèy la.
- Glue Stick Entry: Where glue sticks are inserted.
- Endikatè ki ap dirije: Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
- Trigger Lever: Activates glue dispensing.
- Kalite-C chaje pò: Pou konekte kab chaje a.
- Retractable Stand-up Base: Provides stability when the gun is not in use.
Enstalasyon
Charging the Glue Gun
The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:
- Locate the Type-C charging port on the glue gun.
- Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
- Endikatè ki ap dirije a pral montre wouj pandan y ap chaje epi li vire vèt lè li konplètman chaje.
Enstriksyon Operasyon
Follow these steps to operate your hot glue gun:
- Mete baton lakòl: Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
- Pouvwa sou: Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
- Chofe: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
- Aplike lakòl: Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
- Otomatik fèmen: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.
Nòt enpòtan:
- Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
- Etenn ekipman an epi kite li refwadi nèt anvan ou pake li ale.
- The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.
Antretyen
- Netwayaj: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
- Swen bouch: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can be carefully removed once the gun is cold.
- Depo: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
- Swen batri: For optimal battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in constant use.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pistolet lakòl la pa chofe. | Batri a fèb oswa mouri. Power switch not pressed correctly. | Charge the glue gun fully. Press and hold the ON/OFF switch for 3 seconds until the LED lights up. |
| No glue dispenses when trigger is pulled. | Glue gun not hot enough. Glue stick not fully inserted or jammed. | Wait for the LED indicator to turn green. Ensure glue stick is fully inserted. Do not force it. |
| Glue drips excessively from nozzle. | Normal during heating/cooling. Incorrect glue stick size. | Place the gun on its stand. Use only 0.27" diameter glue sticks. |
| LED indicator remains red. | Still heating up. Chaje an pwogrè. | Wait for approximately 90 seconds for it to turn green. Wait for charging to complete (LED turns green). |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | WORKPRO |
| Nimewo Modèl | W125235 |
| Sous pouvwa | Batri Powered (Ityòm Ion) |
| Voltage | 3.6 Volts |
| Wattage | 9 wat |
| Kapasite batri | 2500mAh |
| Chaje Antre | 5V 1A (Type-C) |
| Tan prechofe | Apeprè. 90 segonn |
| Glue Output Speed | 0.14 oz / min |
| Compatible Glue Stick Diameter | 0.27 inches (Mini Sticks) |
| Otomatik fèmen | 8 minit inaktivite |
| Pwa atik | 1.1 liv |
| Dimansyon pake | 8.11 x 7.52 x 2.13 pous |
| Peyi orijin | Lachin |
| Materyèl konpatib | Wood, Ceramic, Metal, Stone |
Garanti ak sipò
For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, you may visit the official WORKPRO store on Amazon: Magazen WORKPRO
