1. Entwodiksyon
Welcome to the user manual for your new BIANCHI Folding Bicycle. This manual provides essential information for the safe and efficient use, assembly, maintenance, and troubleshooting of your bicycle. Please read this manual thoroughly before your first ride and keep it for future reference.
Your BIANCHI Folding Bicycle, model 285H 7/V V.B., is designed for urban commuting and leisure, offering the convenience of a foldable frame combined with a vintage aesthetic and reliable performance.
2. Enfòmasyon sou Sekirite
Always prioritize safety when operating your bicycle. Failure to follow these safety guidelines may result in serious injury or damage to the bicycle.
- Mete yon kas: Always wear a properly fitted bicycle helmet that meets safety standards.
- Verifikasyon Anvan Wout la: Before each ride, inspect your bicycle for proper tire pressure, brake function, secure quick releases, and overall structural integrity.
- Know Traffic Laws: Obey all local traffic laws, signals, and signs. Ride predictably and signal your turns.
- Vizibilite: Use lights and reflective gear, especially when riding in low light conditions.
- Mekanis pliye: Ensure all folding latches and quick releases are fully engaged and secure before riding. Never attempt to fold or unfold the bicycle while in motion.
- Kondisyon Meteyo: Exercise caution when riding in wet or slippery conditions, as braking distance may increase.
3. Pake kontni
Upon opening your BIANCHI Folding Bicycle package, please verify that all the following components are present:
- BIANCHI Folding Bicycle (main unit)
- Gad labou devan
- Deyè gad bouj
- Manyèl Itilizatè (dokiman sa a)
Si gen nenpòt atik ki manke oswa ki domaje, tanpri kontakte machann ou imedyatman.
4. Enstalasyon
Your BIANCHI Folding Bicycle comes partially assembled. Follow these steps to prepare your bicycle for its first ride.
4.1 Unfolding the Bicycle
- Place the folded bicycle on a flat, stable surface.
- Carefully unfold the main frame hinge until the frame is straight. Secure the frame hinge latch firmly. Ensure the safety catch is engaged.
- Raise the handlebar stem and secure its quick release lever. Ensure the stem is aligned with the front wheel.
- Insert the seat post into the frame and adjust to your desired height. Secure the seat post quick release lever.
- Unfold the pedals if they are in a folded position.
4.2 Pre-Ride Adjustments
- Wotè chèz: Adjust the saddle height so that your leg is slightly bent at the knee when the pedal is at its lowest point.
- Pozisyon gidon: Ensure the handlebar is at a comfortable height and angle.
- Presyon kawotchou: Check the tire pressure using a gauge. Refer to the recommended pressure on the tire sidewall (typically 35-65 PSI for 20-inch tires).
- Fren: Test both front and rear brakes to ensure they engage smoothly and effectively.

This image shows the BIANCHI Folding Bicycle fully assembled, featuring its Celeste (light blue-green) frame, cream-colored tires, brown saddle, and silver components including the folding mechanism, chainring, and rear rack.
5. Opere
Once your BIANCHI Folding Bicycle is properly set up and you have performed the pre-ride checks, you are ready to ride.
5.1 Konsèy pou monte bisiklèt
- Start slowly and get accustomed to the bicycle's handling characteristics.
- Kenbe yon distans ki an sekirite ak lòt machin ak pyeton.
- Anticipate road hazards and adjust your speed accordingly.
5.2 Gear Shifting (7-Speed)
Your bicycle is equipped with a 7-speed gear system. Use the shifter on the handlebar to change gears. Shift to a lower gear (larger cog on the rear wheel) for easier pedaling on inclines, and to a higher gear (smaller cog) for faster speeds on flat terrain or downhill.
5.3 Braking (Disk Brakes)
The bicycle features reliable disk brakes. The right lever typically controls the rear brake, and the left lever controls the front brake. Apply both brakes simultaneously and smoothly for effective stopping. Avoid sudden, hard braking, especially with the front brake, as this can cause loss of control.
5.4 Folding the Bicycle
To fold your BIANCHI Folding Bicycle for storage or transport:
- Desann tij chèz la nan pozisyon ki pi ba a.
- Release the handlebar stem quick release and fold the stem down.
- Release the main frame hinge latch and carefully fold the bicycle in half. Ensure the frame halves align properly.
- Fold the pedals inward if they are designed to do so.
6. Antretyen
Regular maintenance will ensure the longevity and safe operation of your BIANCHI Folding Bicycle.
- Netwayaj: Clean your bicycle regularly with mild soap and water. Avoid high-pressure washers, which can damage bearings. Dry thoroughly after washing.
- Lubrifikasyon chèn: Lubricate the chain every few rides, or more often in wet or dusty conditions. Use a bicycle-specific chain lubricant.
- Presyon kawotchou: Check tire pressure weekly and inflate to the recommended PSI.
- Enspeksyon fren: Periodically check brake pads for wear and ensure brake cables are not frayed. Adjust brake tension as needed.
- Mekanis pliye: Keep the folding hinges clean and lightly lubricated to ensure smooth operation. Inspect latches for wear or damage.
- Boulon ak eleman fikse: Regularly check all bolts and fasteners for tightness. Do not overtighten.
NAN. Depanaj
This section addresses common issues you might encounter with your bicycle.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Tires feel soft or flat | Low tire pressure or puncture | Inflate tires to recommended PSI. Check for punctures and repair if necessary. |
| Fren yo santi yo fèb oswa mou | Worn brake pads, loose cable, or air in hydraulic system (if applicable) | Inspect brake pads and replace if worn. Adjust cable tension. For hydraulic brakes, professional service may be required. |
| Gears are not shifting smoothly | Dirty chain, misaligned derailleur, or stretched cable | Clean and lubricate chain. Check derailleur alignment. Adjust shifter cable tension. |
| Squeaking or creaking noises | Loose components, dry chain, or dirty bearings | Identify source of noise. Tighten loose bolts, lubricate chain, or clean/lubricate bearings. |
For issues not listed here or if you are unsure about a repair, it is recommended to consult a professional bicycle mechanic.
8. Espesifikasyon
Key technical specifications for the BIANCHI Folding Bicycle, Model 285H 7/V V.B.:
| Karakteristik | Spesifikasyon |
|---|---|
| Kalite bisiklèt | Jwèt Vil bisiklèt |
| Kalite fren | Disk fren |
| Koulè | Multi-color (Celeste/Cream) |
| Kalite Materyèl | Aliminyòm |
| Kantite vitès | 7 |
| Sous pouvwa | Pedal |
| Sispansyon | Dèyè |
| Gwosè wou | 20 pous |
| Konpozan ki enkli | Gad labou |
| Manifakti | CUNEYT GULTEKIN |
| Pwa atik | 22 Kilogram |
| Dimansyon pake | 183 x 95 x 34 cm |
9. Garanti ak sipò
For information regarding warranty coverage and customer support for your BIANCHI Folding Bicycle, please refer to the documentation provided at the time of purchase or contact your authorized BIANCHI dealer or the seller directly. Keep your proof of purchase for any warranty claims.
For general inquiries or technical assistance, please reach out to the manufacturer or seller through the contact information provided with your purchase.





