Manyèl Itilizatè Limyè Sispansyon Plafon RecPro RV 12V ak Aplik Vè Krake

1. Entwodiksyon

This manual provides essential information for the safe installation, operation, and maintenance of your RecPro RV 12V Ceiling Mounted Pendant Light with Crackle Glass Sconce, Model RP-1907. Please read these instructions thoroughly before proceeding with installation or use.

Enfòmasyon sou Sekirite

• Ensure power is disconnected before installation or maintenance to prevent electrical shock.
• This product is designed for 12V DC systems only. Do not connect to higher voltage sistèm yo.
• Installation should be performed by a qualified individual if you are unsure about electrical wiring.
• The fixture is certified to CSA C22.2 No. 250.0 and UL234 standards for safety.

2. Pwodwi souview

The RecPro RV 12V Ceiling Mounted Pendant Light (Model RP-1907) features a durable steel frame with a dark gray finish and a distinctive crackle glass sconce. It utilizes energy-efficient LED lighting, making it suitable for RV applications.

Image 2.1: RecPro RV 12V Ceiling Mounted Pendant Light, Model RP-1907. This image shows the complete pendant light fixture with its dark gray finish and crackle glass sconce.

Image 2.2: Diagram highlighting key features of the RecPro RV 12V Ceiling Light. The diagram points out the steel frame for durability, the two-wire connection for easy hookup, and the attractive minimalistic design.

3. Espesifikasyon

Image 3.1: Detailed measurements for the RecPro RV 12V Ceiling Light, Model RP-1907. The diagram shows the overall height of 17 inches, and base dimensions of 6.62 inches by 6.62 inches.

4. Enstalasyon

This pendant light is designed for ceiling mount installation and features a simple two-wire connection. Ensure the power supply to the installation area is turned off before beginning.

1. Prepare Kote Montaj la: Identify a suitable location on your RV ceiling that can support the weight of the fixture and has access to a 12V DC power source.
2. Dekonekte pouvwa: Turn off the main 12V power supply to your RV to prevent electrical shock. Verify with a voltage tester if necessary.
3. Monte baz aparèy la: Position the fixture's mounting base against the ceiling. Mark the screw holes. Drill pilot holes if required. Secure the base to the ceiling using appropriate mounting screws (screws are not included with the fixture). Ensure the base is firmly attached.
4. Fil limyè a: The fixture uses a two-wire design. Connect the positive (+) wire from your RV's 12V power supply to the positive wire of the light fixture (typically red or marked). Connect the negative (-) wire (ground) from your RV to the negative wire of the light fixture (typically black or white). Use appropriate wire connectors and ensure all connections are secure and insulated.
5. Sekirize aparèy la: Once wired, carefully push the excess wiring into the ceiling cavity and secure the light fixture to its mounting base according to its design.
6. Retabli pouvwa: Turn the 12V power supply back on and test the light fixture.

Imaj 4.1: Anba view of the RecPro RV 12V Ceiling Light mounting base, showing the two-wire electrical connections. This illustrates where the positive and negative wires should be connected.

5. Operasyon Enstriksyon

The RecPro RV 12V Ceiling Mounted Pendant Light operates via your RV's standard 12V lighting circuit. Once properly installed and connected to a switched power source, the light can be turned on and off using the corresponding wall switch or control panel in your RV.

• Limen/Etenyen: Use the designated switch in your RV to control the light.
• Efikasite enèji: The integrated LED light source is designed for low power consumption, providing warm white illumination without significant drain on your RV's battery.

Image 5.1: The RecPro RV 12V Ceiling Mounted Pendant Light illuminated, showcasing its warm white light output and the crackle glass effect.

6. Antretyen

Antretyen regilye ap ede prezève aparans ak fonksyonalite lanp pandye ou a.

• Cleaning the Sconce: The crackle glass sconce can be cleaned with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish or glass. For thorough cleaning, the metal parts around the glass can be carefully removed.
• Dirije Sous Sous: The LED light source in this fixture is non-removable and designed for long-term use. If the LED fails, the entire fixture may need replacement.
• Enspeksyon jeneral: Periodically check all connections and mounting hardware to ensure they remain secure, especially after travel.

Imaj 6.1: Gwo plan view of the crackle glass sconce on the RecPro RV 12V Ceiling Light, showing the textured glass detail.

Imaj 6.2: Detaye view of the crackle glass texture on the body of the RecPro RV 12V Ceiling Light, highlighting its unique aesthetic.

NAN. Depanaj

8. Garanti ak sipò

For information regarding product warranty, returns, or technical support, please contact RecPro directly. Warranty terms and conditions may vary and are typically provided at the point of purchase or on the manufacturer's official websit.

Manifakti: RecPro

Please refer to the official RecPro website or your purchase documentation for the most current support information.