OOYCYOO 100A MPPT Solar Charge Controller (K100) User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your OOYCYOO 100A MPPT Solar Charge Controller, model K100. This advanced controller is designed for 12V and 24V battery systems, automatically identifying the system voltage. It features Maximum Power Point Tracking (MPPT) technology for efficient solar energy conversion, supporting various battery types including AGM, Sealed, Gel, Flooded, and Lithium batteries. The K100 model offers enhanced functionalities and advanced technology for reliable solar power management.

2. Enfòmasyon sou Sekirite

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the unit, personal injury, or property damage. Always ensure proper ventilation and connections.

2.1. Fonksyon Pwoteksyon

• PV Over Current/Power: Protects against excessive current or power from solar panels.
• PV Short Circuit: Prevents damage from short circuits in the solar array.
• PV Reverse Polarity: Protects if solar panel polarity is reversed.
• Night Reverse Charging: Prevents battery discharge back to solar panels at night.
• Polarite ranvèse batri: Protects if battery polarity is reversed.
• Battery Over Voltage: Prevents overcharging of the battery.
• Battery Over Discharge: Protects the battery from deep discharge.
• Battery Overheating, Controller Overheating: Shuts down or reduces power to prevent thermal damage.
• Lithium Battery Low Temperature: Protects lithium batteries from charging at low temperatures.
• Load Short Circuit: Protects the load output from short circuits.
• Load Overload: Prevents damage from excessive load current.
• TVS High Voltage Transient: Provides protection against voltage Spikes.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

• 1 x OOYCYOO 100A MPPT Solar Charge Controller (K100)
• 1 x Capteur Tanperati
• 1 x Manyèl Itilizatè (Angle)

4. Pwodwi souview

The OOYCYOO K100 MPPT Solar Charge Controller is designed for robust performance and ease of use. It features a blacklight LCD display for clear monitoring of charging status and system parameters. The unit incorporates scientifically designed convection cooling with two highly efficient exhaust fans to maintain optimal operating temperatures.

4.1. Idantifikasyon konpozan

Figure 1: Controller Terminals and Ports. This image shows the various connection points on the controller, including solar panel terminals, battery terminals, load terminals, USB 5V/2A output, RS485 communication port, and temperature sensor port. Wire jacks are clearly marked for positive and negative connections.

Figure 2: Multiple Protection Features. This diagram highlights the comprehensive safety protections integrated into the controller, such as high temperature, overcharge, reverse current, over discharge, overload, short circuit, and reverse polarity protection.

Figure 3: External Display Unit. An image of the optional external LCD display unit, which connects to the controller via an RS485 communication interface. This unit allows for remote monitoring and adjustment of parameters.

4.2. Videyo pwodwi aview

5. Enstalasyon ak Enstalasyon

Proper installation is crucial for the optimal performance and longevity of your solar charge controller. Ensure all connections are secure and follow the recommended wiring sequence.

5.1. Enstalasyon Kontwolè a

• Mount the controller in a well-ventilated area, away from direct sunlight and moisture.
• Ensure sufficient clearance around the unit for proper airflow, especially around the exhaust fans and the back fence mesh design for heat dissipation.
• Kontwolè a ta dwe monte vètikalman sou yon sifas ki pa ka pran dife.

5.2. Koneksyon fil elektrik

Follow the wiring sequence below to prevent damage:

1. Konekte batri a: First, connect the battery to the controller's battery terminals. Ensure correct polarity (+ to + and - to -). The controller will automatically detect the 12V or 24V system voltage.
2. Konekte Panno Solè yo: Next, connect the solar panels to the controller's solar terminals. Verify correct polarity.
3. Konekte chaj la (Si ou vle): Finalman, konekte chaj DC ou yo nan tèminal chaj kontwolè a.

The power terminals accommodate 10 AWG wiring. For optimal performance, use appropriate wire gauges for all connections.

Figure 4: Battery Adaptability. This illustration demonstrates the controller's compatibility with various battery types (GEL, SEL, USER, AGM, FLD, LI, LiFePO4) and shows a typical charging curve (Bulk Charge, Constant Charging, Float Charge).

6. Operasyon Enstriksyon

Once installed, the controller will begin operating automatically. The built-in LCD display provides real-time information about your solar system.

6.1. LCD Display and Monitoring

The blacklight LCD display shows various parameters simultaneously, including:

• Solè Panel Voltage (PV) and Current (A)
• Batri Voltage (BATT) and State of Charge (%)
• Chaj Voltage (LOAD) and Current (A)
• Cumulative power (KWH)
• Tanperati anbyen
• Charging Faults or Errors
• Load Status (ON/OFF)

The controller automatically tracks real-time data changes in these parameters, providing a comprehensive overview of your system's performance.

6.2. External Display (Optional)

An optional external display unit (LCD D485) can be connected via the RS485 communication port. This unit allows for remote monitoring and adjustment of controller functions and parameters, offering greater flexibility in system management. The external display package includes a 1.5-meter extension cable for convenient placement.

7. Antretyen

Regular maintenance ensures the long-term reliability and efficiency of your OOYCYOO MPPT Solar Charge Controller.

• Lapwòpte: Kenbe kontwolè a pwòp epi san pousyè ak debri. Sèvi ak yon twal sèk pou netwaye.
• Koneksyon: Tcheke tout koneksyon fil elektrik yo detanzantan pou asire yo sere epi yo pa gen korozyon.
• Vantilasyon: Ensure that the cooling fans and ventilation openings are not obstructed. The built-in cooling fan activates when the internal temperature exceeds 45°C and turns off below 40°C, contributing to a longer lifespan (up to 5000 hours in normal use).
• Enspeksyon batri: Regularly inspect your batteries for any signs of damage or leakage.

NAN. Depanaj

If you encounter issues with your solar charge controller, refer to the following common problems and solutions. For complex issues, please contact customer support.

• Pa gen ekspozisyon/pouvwa: Tcheke koneksyon batri yo epi asire w ke vòltaj batri atage is within the operating range (9V-32V).
• Pa gen chaj: Verify solar panel connections and ensure sufficient sunlight. Check for PV over current/power or short circuit protection activation.
• Chaj la pa fonksyone: Check load connections and ensure the load is not overloaded or short-circuited. Verify battery voltage se pi wo a volim ki batage papòt dekoneksyon an.
• Surchof: Ensure adequate ventilation around the controller. Check if the cooling fans are operating correctly when the unit is warm.
• Kòd erè: Refer to the LCD display for specific error codes. Consult the detailed manual or contact support for interpretation.

9. Espesifikasyon

10. Garanti ak sipò

OOYCYOO provides a worry-free after-sales guarantee for this product. If you have any questions or require assistance with your MPPT solar charge controller, please do not hesitate to contact us via email. Our support team is committed to providing prompt assistance.

For technical support or warranty claims, please refer to the contact information provided with your purchase or visit the official OOYCYOO websit.