Flexson Wall Mount for SONOS ERA100 - Black (Single) Instruction Manual

Entwodiksyon

This manual provides comprehensive instructions for the safe and proper installation and use of your Flexson Wall Mount for SONOS ERA100. Please read all instructions carefully before beginning installation.

The Flexson Wall Mount is designed to securely hold your SONOS ERA100 speaker, allowing for optimal sound positioning with its unique tilting mechanism and 80-degree swivel capability. It is constructed from durable alloy steel with a powder-coated finish.

Kontni pake

Anvan enstalasyon an, verifye si tout konpozan yo prezan:

• 1 x Flexson Wall Mount
• Manyèl Enstriksyon
• Fixings (screws, wall plugs)
• Corner Adapter (optional use)

Figi 1: Eksploze view of the Flexson Wall Mount for SONOS ERA100, showing all included components and fixings for assembly.

Enfòmasyon sou Sekirite

• Ensure the mounting surface can support the combined weight of the mount and the SONOS ERA100 speaker.
• Sèvi ak zouti apwopriye ak ekipman sekirite pandan enstalasyon an.
• If unsure about installation, consult a qualified professional.
• Kenbe ti pati yo lwen timoun yo.

Enstalasyon ak Enstalasyon

Follow these steps for proper installation of your Flexson Wall Mount:

1. Chwazi Kote: Chwazi yon bon kote pou miray la, asire w ke li solid epi li pa gen fil elektrik oswa plonbri.
2. Make pwen perçage yo: Hold the wall bracket against the wall at the desired height and use a pencil to mark the drilling points.
3. Fè twou: Drill pilot holes at the marked points. The size of the drill bit will depend on the type of wall and the provided wall plugs.
4. Mete ploge miray yo: Insert the appropriate wall plugs into the drilled holes.
5. Attach Wall Bracket: Secure the wall bracket to the wall using the provided screws. Ensure it is firmly attached.
6. Assemble Speaker Cradle: Attach the speaker cradle components as per the diagram, ensuring all screws are tightened.
7. Mount Oratè: Carefully place your SONOS ERA100 speaker into the assembled cradle. The mount can be inverted to hold the speaker upside down if desired.
8. Attach Speaker to Wall Bracket: Secure the speaker cradle with the speaker to the wall bracket. Ensure the locking mechanism is engaged.
9. Ajiste pozisyon: Adjust the speaker's tilt (up to 20 degrees down) and swivel (80 degrees) to achieve the desired sound direction.

Figi 2: Devan view of the Flexson Wall Mount securely holding a SONOS ERA100 speaker, demonstrating its discreet design.

Figi 3: Side view of the mounted SONOS ERA100 speaker, highlighting the compact profile of the Flexson Wall Mount.

Figi 4: Angle view of the SONOS ERA100 speaker on the Flexson Wall Mount, showcasing its integration with the speaker's design.

Enstriksyon Operasyon

Once installed, the Flexson Wall Mount allows for flexible positioning of your SONOS ERA100 speaker.

• Panche: The mount features a unique tilting mechanism. Gently adjust the speaker to tilt it downwards by up to 20 degrees to direct sound.
• Pivote: The mount allows for an 80-degree swivel (40 degrees left and 40 degrees right) to optimize sound direction. Carefully rotate the speaker to the desired angle.
• Montaj Envèse: The design allows the speaker to be mounted upside down if required for specific aesthetic or acoustic needs.

Figi 5: Bò pre view illustrating the secure attachment and potential for adjustment of the SONOS ERA100 speaker on the Flexson Wall Mount.

Antretyen

The Flexson Wall Mount requires minimal maintenance.

• Netwayaj: Siye montur la avèk yon twal mou epi sèk pou retire pousyè a. Evite pwodui netwayaj abrazif oswa solvan.
• Tcheke peryodik: Periodically check all screws and fixings to ensure they remain tight and secure.

Depanaj

Espesifikasyon

Garanti ak sipò

For warranty information and technical support, please refer to the official Flexson websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe resi acha w la kòm prèv acha.

Manifakti: Flexson

Websit: Visit the Flexson Store on Amazon (pou enfòmasyon jeneral sou mak la)