1. Enfòmasyon enpòtan sou sekirite
Please read these instructions carefully before installing or operating your ARTIKA Aristo LED Flush Mount. Retain this manual for future reference.
- Sekirite elektrik: Always turn off the main power supply at the circuit breaker before beginning installation or performing any maintenance.
- Elektrisyen ki kalifye: Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring.
- Atè: Ensure the fixture is properly grounded to avoid potential electrical shock.
- Voltage: Aparèy sa a fèt pou yon ekipman pou kouran 120V AC.
- Dimmabilite: Compatible with most LED dimmers. Consult a qualified electrician if unsure about dimmer compatibility.
- Itilize andedan kay la sèlman: This product is intended for indoor use in dry locations. Do not expose to water or moisture.
- Dirije entegre: The LED light source is integrated and not replaceable. Do not attempt to disassemble the LED module.
2. Pake kontni
Verify that all components are present before installation.
- ARTIKA Aristo LED Flush Mount Fixture
- Materyèl pou monte (vis, nwa fil, sipò pou monte)
- Manyèl Enstriksyon
Image 2.1: ARTIKA Aristo LED Flush Mount Fixture. This image displays the complete flush mount fixture with its black base and gold-accented arms holding the LED light sources.
3. Zouti ki nesesè yo (pa enkli)
- Phillips tèt tournevis
- Flat Tounvis
- Fil retire rad sou ou
- Tep elektrik
- Linèt sekirite
- Nechèl
4. Enstalasyon ak Enstalasyon
Follow these steps carefully to install your ARTIKA Aristo LED Flush Mount.
- Etenn pouvwa: Before starting, ensure the power to the junction box is turned off at the circuit breaker.
- Prepare Support Mounting: Fikse sipò montaj la nan bwat koneksyon an avèk vis yo bay yo. Asire w ke li byen fikse.
- Koneksyon fil elektrik:
- Konekte a nwa fil soti nan aparèy la rive nan la nwa (Live) wire from the junction box using a wire nut.
- Konekte a blan fil soti nan aparèy la rive nan la blan (Neutral) wire from the junction box using a wire nut.
- Konekte a vèt or kwiv fè ground wire from the fixture to the ground wire from the junction box (or to the green ground screw on the mounting bracket).
- Ak anpil atansyon mete tout fil nan bwat junction la.
- Monte aparèy la: Align the fixture with the mounting bracket and secure it with the provided screws. Ensure the fixture is flush against the ceiling.
- Retabli pouvwa: Yon fwa aparèy la byen enstale, refè kouran an nan disjoncteurs a.
Image 4.1: Dimensions of the ARTIKA Aristo LED Flush Mount. The image shows the fixture with measurements: 53.5 cm (21.06 inches) in length and width, and 12.5 cm (4.92 inches) in height.
5. Operasyon Enstriksyon
The ARTIKA Aristo LED Flush Mount offers adjustable lighting features.
- Limen/Etenyen: Sèvi ak switch miray òdinè ou a pou limen oswa etenn aparèy limyè a.
- Fonksyon dimmable: This fixture is compatible with most LED dimmers. When connected to a compatible dimmer switch, you can adjust the brightness level to your preference.
- Tanperati Koulè Reglabl (CCT): The fixture allows you to select between three color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight White). This is typically controlled by cycling the wall switch quickly (off-on-off-on) to change the CCT. Refer to the specific instructions provided with your fixture or consult the manufacturer's website for detailed CCT adjustment methods if not immediately apparent.
Image 5.1: Illustration of the ARTIKA Aristo LED Flush Mount's selectable white light feature. The image shows the fixture emitting light at 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight White) color temperatures.
6. Antretyen
To ensure the longevity and optimal performance of your ARTIKA Aristo LED Flush Mount, follow these simple maintenance guidelines:
- Netwayaj: Toujou etenn kouran an anvan ou netwaye. Sèvi ak yon twal mou, sèk oswa yon ti kras mouye.amp cloth to wipe the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- Pa gen ranplasman anpoul: This fixture uses integrated LED technology. The LED light source is designed to last for 50,000 hours and is not user-replaceable. Do not attempt to replace any bulbs.
- Enspeksyon: Enspekte aparèy la detanzantan pou wè si li gen nenpòt siy domaj oswa koneksyon ki lach. Si ou jwenn nenpòt pwoblèm, koupe kouran an epi konsilte yon elektrisyen kalifye.
NAN. Depanaj
If you encounter issues with your ARTIKA Aristo LED Flush Mount, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. |
|
|
| Limyè a tranble oswa li diminye yon fason ki pa konsistan. |
|
|
| Tanperati koulè a pa chanje. |
|
|
If the problem persists after trying these solutions, please contact ARTIKA customer support.
8. Espesifikasyon
| Mak | ARTIKA |
| Non modèl | Aristo |
| Nimewo Modèl | FM-ARC-BG |
| Sous pouvwa | AC |
| Voltage | 120 Volts |
| Wattage | 22 Watts |
| Klète | 2000 Lumen |
| Tanperati Koulè | 3000K, 4000K, 5000K (Selectable) |
| Mwayèn lavi | 50,000 èdtan |
| Dimmable | Yes (Compatible with most LED dimmers) |
| Endèks rann koulè (CRI) | 80.00 |
| Materyèl | Alloy Steel, plastik |
| Fini Kalite | Painted (Matte Black with Gold Accent) |
| Dimansyon pwodwi | 21.06"L x 4.92"W x 21.06"H (53.5 cm x 12.5 cm x 53.5 cm) |
| Pwa atik | 3.46 liv (1.57 kg) |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la |
| UPC | 846979040902 |
9. Garanti ak sipò
Garanti: This ARTIKA product comes with a Limited Warranty. Please refer to the warranty card included with your purchase or visit the official ARTIKA websit la pou wè tèm ak kondisyon garanti detaye yo.
Manifakti: Artika For Living inc.
Sipò Kliyan: For technical assistance, missing parts, or warranty claims, please contact ARTIKA customer support. Contact information can typically be found on the ARTIKA websit la oubyen sou anbalaj pwodwi a.
Resous sou entènèt: For additional information, FAQs, or to register your product, visit the official ARTIKA websit: www.artika.com
