1. Entwodiksyon
The SilverStone Vista 140 ARGB is a 140mm PWM fan designed for efficient computer cooling. It features a 4-pin PWM control for precise fan speed regulation, a hydraulic bearing for quiet operation, and optimized fan blades to deliver both high airflow and static pressure. This fan also incorporates eight individually addressable RGB (ARGB) LEDs, allowing for customizable lighting effects. These ARGB LEDs can be controlled via a compatible ARGB controller or an ARGB-capable motherboard using standard 4-1 pin ARGB connectors.
Image 1.1: The SilverStone Vista 140 ARGB fan showcasing its customizable rainbow lighting effects.
2. Pwodwi Features
- Addressable RGB Lighting: Standard 4-1 pin ARGB lighting, synchronized via an ARGB controller or ARGB compatible motherboards.
- Pèfòmans optimize: Delivers high airflow and static pressure suitable for various cooling applications.
- Kontwòl PWM: Wide 0~1,600 RPM speed range via PWM control for tailored performance on demand.
- Operasyon trankil: Hydraulic bearing reduces friction and maintains low operational noise levels.
- Rediksyon Vibwasyon: Integrated rubber padding helps to further reduce vibrational noise.
Image 2.1: Hybrid Performance - A visual representation of the fan's balanced airflow and air pressure capabilities.
Image 2.2: PWM Control - A graph illustrating the fan's speed range from 0 to 1,600 RPM controlled by PWM duty cycle.
3. Pake kontni
Verifye ke tout atik yo prezan nan pakè a:
- SilverStone Vista 140 ARGB Fan
- Cables (PWM and ARGB connectors)
4. Enstalasyon ak Enstalasyon
Follow these steps to properly install your SilverStone Vista 140 ARGB fan:
- Prepare Kote pou Monte a: Identify the desired mounting location within your computer case, heatsink, or radiator. Ensure there is sufficient space and proper airflow direction.
- Monte fanatik la: Secure the fan to the mounting location using appropriate screws. The integrated rubber padding on the fan corners helps reduce vibration.
- Konekte kab PWM lan: Locate the 4-pin PWM fan header on your motherboard. Connect the fan's 4-pin PWM cable to this header. This allows the motherboard to control the fan speed based on system temperature.
- Konekte kab ARGB la: Locate a 4-1 pin (3-pin, 5V) Addressable RGB header on your motherboard or an external ARGB controller. Connect the fan's ARGB cable to this header. Ensure correct pin orientation to avoid damage.
- Jesyon kab: Route cables neatly to prevent interference with other components and to maintain good airflow within the case.
Image 4.1: Fan corner with anti-vibration rubber padding.
Image 4.2: 4-pin PWM connector for fan speed control.
Image 4.3: 4-1 pin ARGB connector for lighting control.
5. Operasyon Enstriksyon
Once installed, the SilverStone Vista 140 ARGB fan operates as follows:
- Kontwòl vitès fanatik (PWM): The fan speed is automatically regulated by your motherboard's BIOS/UEFI settings or operating system software, based on the temperature of your system components. You can typically adjust fan curves in your motherboard's software or BIOS to customize performance.
- Kontwòl ekleraj ARGB: The Addressable RGB lighting can be controlled using your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) or an external ARGB controller. Refer to your motherboard or controller manual for specific instructions on customizing lighting effects.
6. Antretyen
Antretyen regilye asire pèfòmans optimal ak lonjevite fanatik ou a:
- Retire pousyè: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Ensure the computer is powered off and unplugged before cleaning.
- Enspeksyon: Check for any obstructions around the fan or damage to the cables.
NAN. Depanaj
Si ou rankontre pwoblèm ak vantilatè ou a, konsidere bagay sa yo:
- Vantilatè a pa ap vire:
- Ensure the 4-pin PWM cable is securely connected to the motherboard fan header.
- Tcheke paramèt BIOS/UEFI yo pou asire ke koneksyon fanatik la aktive epi li byen konfigire.
- Verifye ke ekipman pou pouvwa a ap fonksyone kòrèkteman.
- Pa gen ekleraj ARGB:
- Confirm the 4-1 pin ARGB cable is correctly connected to a 5V ARGB header (not a 12V RGB header). Incorrect connection can damage the LEDs.
- Ensure your motherboard's ARGB software or external controller is properly installed and configured.
- Check for any physical damage to the ARGB cable or LEDs.
- Twòp bri:
- Asire w ke vantilatè a byen monte epi li pa vibre kont bwat la.
- Clean any dust buildup on the fan blades.
- Check fan speed settings in BIOS/UEFI; higher RPMs generate more noise.
8. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Mak | SilverStone |
| Nimewo Modèl | SST-VS140B-ARGB |
| Fan Dimensions (LxWxH) | 5.51 x 5.51 x 0.98 pous (140 x 140 x 25 mm) |
| Pwa atik | 1 liv |
| Pouvwa Connector Kalite | X-PIN-PWM |
| ARGB Connector Type | 4-1 pin (3-pin, 5V) Addressable RGB |
| Voltage | 12 Volts |
| Metòd refwadisman | Fanatik |
| Aparèy konpatib | Radiator, PC Case |
| Materyèl | Rubber (for padding) |
| Maksimòm vitès wotasyon | 1600 RPM |
| Kapasite Flow Air | 86 pye kib pou chak minit (CFM) |
| Nivo bri | 0 ~ 30.8 dBA |
9. Garanti ak sipò
SilverStone Technology products are designed for reliability and performance. For warranty information and technical support, please refer to the official SilverStone Technology websit la oubyen kontakte sèvis kliyan yo dirèkteman.
Ou ka jwenn plis enfòmasyon ak resous sipò lè w vizite Magazen SilverStone sou Amazon.
