KKnoon TOOLTOP ET618 Handheld Portable Cable Tester User Manual

1. Entwodiksyon

This manual provides detailed instructions for the safe and effective use of the KKnoon TOOLTOP ET618 Handheld Portable Cable Tester. The ET618 is a versatile device designed for network cable testing, offering functions such as cable tracing, cable length measurement, Power over Ethernet (PoE) testing, and various multimeter capabilities. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.

Image 1.1: The KKnoon TOOLTOP ET618 device, highlighting its dual function as a network cable tester and multimeter.

Karakteristik kle:

• Cable Tracing Function: Quickly locate target cables within bundles, suitable for telephone systems, computer networks, and BNC cables.
• Cable Length Test: Measures the length of various metal cables with at least two cores, including network cables, telephone lines, and BNC cables.
• Tès PoE: Checks cable mapping polarity and voltage of PoE network switches.
• Multifunctional Tester: Includes analogue tracing, cable mapping, PoE voltage measurement, and adjustable digital tracing sensitivity.
• LCD Display with Flashlight: Features a large LCD for clear readings and an integrated flashlight for use in low-light conditions.
• Noiseless Vibration (ET618 only): Enhanced digital tracing with vibration feedback.

2. Enfòmasyon sou Sekirite

Please observe the following safety precautions to prevent injury and avoid damage to the device:

• Always inspect the device and test leads for damage before use. Do not use if damaged.
• Pa eseye mezire voltages oswa kouran ki depase evalyasyon maksimòm espesifye yo.
• Ensure proper connection of test leads before performing any measurement.
• Avoid using the device in wet environments or during electrical storms.
• Kenbe aparèy la lwen timoun yo.
• Refer to the specifications section for operating temperature and other environmental limits.

3. Pake kontni

Verifye ke tout atik ki nan lis anba a yo nan pakè ou a. Si gen nenpòt atik ki manke oswa ki domaje, tanpri kontakte machann ou an.

Image 3.1: Visual representation of the ET618 package contents, including the main unit, receiver, probes, and accessories.

ET618 Package Includes:

• Main Tester Unit (Emitter)
• Wire Tracker Receiver
• Crocodile Clip Line
• Rezo kab
• Charging Line (USB cable)
• Sonde Tanperati
• Multimeter Probes
• Sak Depo
• Bwat koulè
• Manyèl itilizatè

4. Pwodwi souview

Familiarize yourself with the components of the ET618 cable tester and its receiver.

Image 4.1: The complete set of the KKnoon TOOLTOP ET618, showing the main tester, receiver, and all included accessories.

Main Tester Unit (Emitter):

• Ekspozisyon LCD: Shows measurement results, mode, and other relevant information.
• Bouton Fonksyon: For selecting test modes (LENGTH, TEST, SCAN, POE, DMM functions).
• Pò: RJ45 port for network cables, BNC port, test lead inputs for multimeter functions.
• Flach: Integrated light for illuminating work areas.

Image 4.2: The ET618 main unit displaying its dual flashlight feature, useful for working in dark environments.

Wire Tracker Receiver:

• Sonde Konsèy: Used to detect signals from the emitter.
• Endikatè mòd: LEDs to indicate tracing mode (Analog/Digital).
• Ajisteman sansiblite: Dial to adjust the sensitivity of the receiver.
• Feedback Vibration: (ET618 only) Provides tactile feedback during digital tracing.

Image 4.3: The ET618 emitter and receiver demonstrating the noiseless vibration feature during cable tracing.

5. Enstalasyon

5.1 Charging the Main Tester Unit

The main tester unit (emitter) has a built-in 1250mAh lithium battery. Before first use, ensure the device is fully charged.

1. Connect the provided USB charging cable to the charging port on the main tester unit.
2. Konekte lòt bout kab USB a nan yon adaptè kouran USB estanda (pa enkli) oubyen nan yon pò USB òdinatè.
3. The charging indicator on the device will show charging status. Once fully charged, disconnect the cable.

Image 5.1: The ET618 main unit connected to a power source for charging its internal lithium battery.

5.2 Installing Battery in Receiver

The wire tracker receiver requires a 9V battery (not included).

1. Jwenn konpatiman batri a sou dèyè reseptè a.
2. Louvri kouvèti lòj batri a.
3. Mete yon nouvo pil 9V, asire w ke polarite a kòrèk.
4. Fèmen kouvèti lòj batri a byen.

6. Operasyon Enstriksyon

6.1 Cable Tracing Function

This function helps locate a specific cable among many.

1. Connect the network cable or other metal cable to the MAIN socket on the emitter.
2. Turn on the emitter and select the 'SCAN' mode.
3. Turn on the receiver and adjust its sensitivity dial.
4. Move the receiver's probe along the cable bundle. The receiver will emit an audible tone and/or vibrate (ET618) when it detects the signal from the target cable.
5. Follow the strongest signal to trace the cable.

6.2 Cable Length Test

Measures the length of network cables, telephone lines, and BNC cables.

1. Ensure the cable to be tested is disconnected from all devices.
2. Connect one end of the cable to the appropriate port on the emitter (e.g., RJ45 for network cables).
3. Select the 'LENGTH' mode on the emitter.
4. The LCD will display the measured cable length.

6.3 POE Test

Checks Power over Ethernet (PoE) status, including voltage ak polarite.

1. Connect the network cable from the PoE switch to the RJ45 port on the emitter.
2. Select the 'POE' mode on the emitter.
3. The LCD will display the PoE voltage and pin polarity.

Image 6.1: The ET618 displaying PoE voltage and active pins during a PoE test on a network switch.

6.4 Multimeter Functions

The ET618 also functions as a digital multimeter for various electrical measurements.

Image 6.2: The ET618 demonstrating its multimeter capabilities, including continuity, temperature, NCV, and current measurements.

6.4.1 Tès kontinwite

1. Connect the multimeter probes to the appropriate input jacks on the emitter.
2. Select the continuity mode (often indicated by a diode symbol or sound wave).
3. Touch the probes to the circuit or component. An audible beep indicates continuity.

6.4.2 Mezi Tanperati

1. Connect the temperature probe to the designated input jacks.
2. Select the temperature measurement mode.
3. Place the probe tip on the surface or in the environment to be measured. The temperature will be displayed on the LCD.

6.4.3 Voltage (NCV) Deteksyon

1. Chwazi mòd NCV la.
2. Bring the top of the emitter close to an AC voltage source (e.g., an electrical outlet or live wire).
3. Aparèy la ap endike prezans vòltaj AC a.tage through visual and/or audible alerts without direct contact.

6.4.4 Mezi Kouran

1. Connect the multimeter probes to the appropriate current input jacks (e.g., 10A MAX).
2. Select the current measurement mode (AC or DC).
3. Break the circuit and connect the meter in series with the load. The current reading will be displayed.

7. Antretyen

7.1 Netwayaj

Siye aparèy la ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvan. Asire w ke aparèy la etenn epi dekonekte nan nenpòt sous kouran anvan ou netwaye li.

7.2 Depo

When not in use, store the ET618 in its protective bag in a cool, dry place, away from direct sunlight and extreme temperatures. Remove the 9V battery from the receiver if storing for extended periods to prevent leakage.

7.3 Swen Batri

Recharge the main tester unit regularly, even if not in frequent use, to maintain battery health. Avoid fully discharging the lithium battery for prolonged periods.

NAN. Depanaj

If you encounter issues with your ET618, refer to the table below for common problems and solutions.

9. Espesifikasyon

Detailed technical specifications for the KKnoon TOOLTOP ET618.

10. Garanti ak sipò

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.