WORKPRO 20V Brushless Cordless Angle Grinder (Model W123017AE) User Manual

1. Entwodiksyon

This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your WORKPRO 20V Brushless Cordless Angle Grinder, Model W123017AE. Please read all instructions carefully before using the tool to ensure proper function and to prevent injury.

Enfòmasyon jeneral sou sekirite

Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves when operating the angle grinder. Ensure the work area is clear of obstructions and well-lit. Keep bystanders and children away from the operating area. Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool.

2. Sa ki enkli

Your WORKPRO 20V Brushless Cordless Angle Grinder kit includes the following components:

• 1 × Cordless Angle Grinder (Brushless)
• 1 × Chajè rapid
• 1 × 20V 4.0Ah Li-Ion Battery
• 5 × 60 Grit Flap Discs
• 5 × Metal/Stainless Cutting Wheels
• 1 × Metal Safety Wheel Guard
• 1 × Plastic Safety Wheel Guard
• 1 × Spanner Wrench
• 1 × Auxiliary Rubber Handle

The kit provides everything necessary to begin grinding and cutting tasks.

3. Enstalasyon

3.1 Chaje ak Enstalasyon Batri

Before first use, fully charge the 20V 4.0Ah Lithium-Ion battery using the provided fast charger. The charger can replenish the battery in approximately 1-2 hours.

To install the battery, align the battery pack with the base of the grinder and slide it in until it clicks securely into place. To remove, press the battery release button and slide the battery out.

3.2 Auxiliary Handle Attachment

The auxiliary handle can be attached in three positions for optimal comfort and control. Screw the handle into the desired threaded opening on the grinder head until it is firm.

3.3 Safety Guard Installation

The grinder includes two safety wheel guards: one metal and one plastic. Select the appropriate guard for your task (grinding or cutting). To install, align the guard with the grinder head and secure it using the guard clamping lever. Ensure the guard is positioned to deflect sparks and debris away from you.

3.4 Disc Installation

To install a grinding or cutting disc:

1. Asire w retire batri a.
2. Peze epi kenbe bouton an fèmen file koton.
3. Use the spanner wrench to loosen and remove the outer flange.
4. Place the desired disc onto the spindle, ensuring it sits flush against the inner flange.
5. Re-attach the outer flange and tighten it firmly with the spanner wrench while holding the spindle lock button.

4. Operasyon Enstriksyon

4.1 Limen/Etenyen

The grinder features a two-step operational switch for safety. To turn on, push the switch forward and then up. To turn off, release the switch.

4.2 Kontwòl vitès

The tool offers two speed settings (0-2500 RPM and 0-8500 RPM) controlled by a button on the battery housing. Select the appropriate speed for your material and task. Lower speeds are generally used for lighter tasks or when more control is needed, while higher speeds are for aggressive material removal.

4.3 Grinding and Cutting

Toujou asire w ke pyès la byen sere.amped. Apply light, consistent pressure to the tool. Allow the disc to do the work; excessive force can lead to kickback or damage to the tool and disc. Maintain a firm grip on the auxiliary handle and main body. For grinding, hold the disc at a slight angle to the workpiece. For cutting, hold the disc perpendicular to the workpiece and make shallow passes.

4.4 Brushless Motor Technology

This angle grinder is equipped with a brushless motor, which provides higher efficiency, longer service life, and lower operating noise compared to traditional brushed motors. This technology also contributes to the tool's 8500 RPM maximum speed, suitable for demanding tasks on metal, tiles, and concrete.

4.5 Videyo pwodwi Plis paseview

5. Antretyen

5.1 Netwayaj

Regularly clean the tool's ventilation openings to prevent overheating. Use a soft brush or compressed air to remove dust and debris. Do not use solvents or harsh chemicals.

5.2 Ranplasman Disk

Replace worn or damaged discs promptly. Refer to section 3.4 for disc installation instructions. Always use discs rated for the grinder's maximum RPM and appropriate for the material being worked on.

5.3 Depo

Store the angle grinder and its accessories in a dry, secure location out of reach of children. Ensure the battery is removed from the tool before storage. For long-term storage, charge the battery partially (around 50%) and recharge every few months to maintain battery health.

NAN. Depanaj

7. Espesifikasyon

8. Garanti ak sipò

WORKPRO products are manufactured to high-quality standards. For warranty information, product support, or service inquiries, please refer to the warranty card included with your product or visit the official WORKPRO websit la. Kenbe resi acha ou kòm prèv acha pou nenpòt reklamasyon garanti.