Entwodiksyon
Thank you for choosing the Pelonis Personal Mini Fan Forced Heater. This compact and efficient heater is designed to provide supplemental warmth to small personal spaces such as offices, bedrooms, or bathrooms. Its adjustable thermostat and multiple heat settings allow for personalized comfort. Please read this manual thoroughly before operation to ensure safe and effective use.
Enfòmasyon enpòtan sou sekirite
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons. This heater is for indoor use only.
- PA KOUVRI: Never cover the heater or block the air intake/outlet openings. This can lead to overheating and fire.
- Pwoteksyon pou ti gout: The heater is equipped with a safety switch that automatically turns the unit off if it is accidentally tipped over.
- Pwoteksyon Surchof: A red indicator light will illuminate if the heater gets too hot, and the unit will automatically shut off to prevent overheating.
- Keep combustible materials (furniture, pillows, bedding, papers, clothes, and curtains) at least 3 feet (0.9 m) from the front of the heater and away from the sides and rear.
- Do not use in bathrooms, laundry areas, or similar indoor locations where water is present.
- Toujou ploge aparèy chofaj yo dirèkteman nan yon priz/reseptak miray. Pa janm itilize ak yon kòd ekstansyon oswa tiyo kouran ki kapab deplase (priz/tire kouran).
Pwodwi souview
Familiarize yourself with the components of your Pelonis Personal Mini Fan Forced Heater:
- Thermostat Dial: Adjusts the desired temperature (Min to Max).
- Heat Setting Dial: Selects fan-only mode or one of three heat levels (Off, Fan, 1, 2, 3).
- Limyè Endikatè: Illuminates when the heater is operating or if an overheat condition occurs.
- Grille devan: Air outlet for heated or fan-only air.
- Rear Air Intake: Where air is drawn into the unit.
- Manch pou pote: Manch entegre pou fasilite transpò.
- Entèriptè Sekirite Kont Ranvèsman: Sitiye nan pati anba inite a.

Figi 1: Devan ak anwo view of the Pelonis Personal Mini Fan Forced Heater, highlighting the thermostat and heat setting dials.

Figi 2: Gwo plan devan view of the heater, showing the protective grille over the fan.

Figi 3: Dèyè view of the heater, illustrating the power cord connection and the location of the tip-over safety switch on the base.
Enstalasyon
- Unpack the heater from its packaging and remove all protective materials.
- Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 meters) away from walls, furniture, and other objects.
- Asire w ke kòd elektrik la pa bouche oswa mete anba tapi.
- Branche aparèy chofaj la dirèkteman nan yon priz miray 120V AC. Pa sèvi ak kòd ekstansyon oswa multipriz.
Enstriksyon Operasyon
Turning On/Off and Heat Settings
- To turn the heater on, rotate the Chalè Anviwònman Dial clockwise from the "OFF" position.
- Chwazi mòd ou vle a:
- Fan Only (Fan icon): Provides cool air circulation without heat.
- Heat Setting 1: Pwodiksyon chalè ki ba.
- Heat Setting 2: Pwodiksyon chalè mwayen.
- Heat Setting 3: Segondè pwodiksyon chalè.
- To turn the heater off, rotate the Chalè Anviwònman Dial counter-clockwise to the "OFF" position.
Ajiste Thermostat la
- Once a heat setting (1, 2, or 3) is selected, rotate the Thermostat Dial to your desired temperature.
- Turn the dial towards "MAX" for higher heat and "MIN" for lower heat.
- Aparèy chofaj la ap monte ak etenn pou kenbe tanperati a mete.
Antretyen
Antretyen regilye ede asire lonjevite ak fonksyònman an sekirite nan aparèy chofaj ou a.
- Netwayaj: Toujou debranche aparèy chofaj la epi kite l refwadi nèt anvan ou netwaye li. Sèvi ak yon twal mou.amp twal pou siye sifas ekstèn yo. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
- Depo: Lè w pa ap itilize aparèy chofaj la, sere l nan yon kote ki fre epi sèk. Li rekòmande pou w sere l nan anbalaj orijinal li pou pwoteje l kont pousyè ak domaj.
- Do not attempt to open or repair the heater yourself. Refer all servicing to qualified service personnel.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Chofaj pa limen. | Not plugged in; power outlet not working; tip-over switch activated; overheat protection activated. | Ensure unit is securely plugged into a working outlet. Check if the heater was tipped over (reset by placing upright). Allow unit to cool down if overheat light is on. |
| Chofaj la sispann fonksyone sanzatann. | Overheat protection activated; tip-over switch activated. | Unplug the unit, allow it to cool for 10-15 minutes, then plug back in. Ensure unit is on a stable, flat surface. |
| Chofaj la limen men li pa pwodui chalè. | Set to "Fan Only" mode; thermostat set too low. | Ensure the Heat Setting Dial is on 1, 2, or 3. Adjust the Thermostat Dial to a higher setting. |
Espesifikasyon
- Mak: PELONIS
- Nimewo Modèl: 0750545106520
- Faktè fòm: Pedestal
- Itilizasyon anndan/deyò: Andedan kay la
- Kalite chanm: Biwo Kay
- Kalite gaz: Elektrik
- Kantite vitès: 3 (Heat settings) + Fan Only
- Voltage: 120 Vòlt (AC)
- Ampepòk: 12.5 Amps
- Anviwònman Tanperati Max: 450 degre Fahrenheit
- Pwa atik: 3.66 liv
- Dimansyon pake: 10.35 x 8.62 x 4.72 pous
- UPC: 750545106520
Garanti ak sipò
For warranty information or technical support, please refer to the warranty card included with your product or visit the official PELONIS website. Do not attempt to repair the unit yourself.





