Polibi Twin-Over-Full Wooden Bunk Bed with Trundle Instruction Manual

1. Enfòmasyon enpòtan sou sekirite

Tanpri li epi konprann tout enstriksyon yo anvan ou kòmanse asanblaj ak itilizasyon. Kenbe manyèl sa a pou referans pita.

• Be cautious when using the trundle bed to avoid pinching fingers.
• Ensure the mattress on the upper bunk is securely fastened to prevent shifting.
• Do not exceed the weight limit of 250 lbs on the upper bunk.
• The bottom bunk has a weight capacity of 450 lbs.
• The trundle bed has a weight capacity of 300 lbs.
• Recommended mattress thickness: Upper bed: 6 inches; Bottom bed: 6-8 inches; Trundle: 6 inches.
• Always use the provided guardrails on the upper bunk.
• Periodically check all connections and tighten hardware as needed.

2. Pwodwi souview

The Polibi Twin-Over-Full Wooden Bunk Bed with Trundle is designed to provide versatile sleeping arrangements. It features a twin-size upper bunk, a full-size lower bunk, and a pull-out twin-size trundle bed. The unit can also be separated into two individual beds (one twin loft bed and one full-size bed).

Figi 2.1: Assembled Polibi Twin-Over-Full Bunk Bed with Trundle. This image shows the complete bunk bed unit with the trundle bed pulled out, ready for use.

Figi 2.2: Devan view of the Polibi Bunk Bed, showcasing the ladder and guardrails.

3. Enstriksyon Asanblaj (Enstalasyon)

Assembly is required. It is recommended that two adults assemble this product. Ensure all parts are present before beginning. Do not use power tools for assembly as this may overtighten and damage the wood.

3.1. Pake kontni

Verify that all components are included in your package. Refer to the parts list provided in your packaging for exact quantities. Typical components include:

• Bed frames (headboards, footboards, side rails)
• Ladder components
• Guardrails
• Slat kits for upper, lower, and trundle beds
• Trundle bed frame and casters
• Hardware pack (bolts, nuts, washers, Allen wrench)

3.2. Asanblaj etap pa etap

1. Depake epi òganize: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent scratching. Group similar parts and hardware.
2. Rasanble kabann Trundle la: Begin by assembling the trundle bed frame. Attach the casters to the trundle frame according to the instructions in your specific parts diagram. Insert the trundle slats.
3. Assemble Lower Bed: Connect the side rails to the headboard and footboard of the full-size lower bed using the provided hardware. Ensure all connections are secure but do not fully tighten until all parts are aligned. Insert the full-size bed slats.
4. Assemble Upper Bed: Connect the side rails to the headboard and footboard of the twin-size upper bed. Attach the guardrails to the upper bed frame. Insert the twin-size bed slats.
5. Atache nechèl la: Securely attach the ladder to the designated side of the upper bunk, ensuring it is stable and safe for climbing.
6. Stack Beds: Carefully lift the assembled upper twin bed and place it onto the assembled lower full bed, aligning the connecting posts. Secure the upper bed to the lower bed using the provided hardware.
7. Sere final la: Once all components are assembled and aligned, systematically tighten all bolts and screws. Do not overtighten.
8. Mete Trondl: Glise kabann ki monte a anba kabann ki pi ba a.

Figi 3.1: Detailed dimensions of the Polibi Bunk Bed and Trundle. This diagram provides measurements for each section, crucial for assembly and space planning.

Figi 3.2: Eksploze view of the Polibi Bunk Bed components, showing the separate trundle unit and bed frames before assembly.

4. Operasyon Enstriksyon

4.1. Using the Bunk Bed

• Kabann anwo: Access the upper bunk using the integrated ladder. Always ensure the guardrails are properly installed and secure.
• Kabann anba: The full-size lower bunk provides ampespas pou dòmi an.

4.2. Using the Trundle Bed

• To use the trundle bed, gently pull it out from under the lower bunk. The casters allow for easy movement.
• To store, push the trundle bed back under the lower bunk until it is fully recessed.

Figi 4.1: The trundle bed fully extended from beneath the lower bunk, demonstrating its functionality.

4.3. Converting to Two Separate Beds

This bunk bed can be converted into two individual beds. This process requires partial disassembly and reassembly.

1. Demonte: Carefully remove the hardware connecting the upper bunk to the lower bunk. Detach the ladder and guardrails from the upper bunk.
2. Separe: Gently lift the upper twin bed off the lower full bed.
3. Reassemble (if needed): If the upper bed is to be used as a standalone twin bed, ensure all necessary end panels and supports are attached to form a complete bed frame. The lower bed will function as a standalone full bed.

Figi 4.2: The Polibi Bunk Bed separated into a twin bed and a full bed, demonstrating its convertible feature.

5. Antretyen ak Swen

• Netwayaj: Siye sifas yo ak yon mou, damp twal. Evite pwodui chimik ki agresif oswa pwodui netwayaj abrazif ki ka domaje fini an.
• Tcheke Materyèl: Periodically inspect all bolts, screws, and connections to ensure they are tight. Re-tighten as necessary to maintain structural integrity and safety.
• Swen bwa: Pwoteje bwa a kont chanjman tanperati ekstrèm ak limyè solèy dirèk pou anpeche li defòme oswa li pa fennen.
• Mattress Support: Ensure slats are evenly spaced and securely in place to provide proper mattress support.

NAN. Depanaj

• Kabann nan santi l ap tranble:
  • Check all bolts and screws. Ensure they are fully tightened.
  • Verifye ke tout konpozan yo byen reyini dapre enstriksyon yo.
• Trundle bed does not slide smoothly:
  • Inspect the casters for any obstructions or damage.
  • Ensure the floor surface is clear and even.
• Pati ki manke:
  • Refer to the parts list in your packaging. Contact customer support with the specific part number for assistance.

7. Espesifikasyon

Figi 7.1: Side view of the Polibi Bunk Bed, highlighting the sturdy construction and guardrail design.

8. Garanti ak sipò

Polibi products are manufactured with quality and care. For specific warranty information, please refer to the documentation included with your purchase or visit the official Polibi websit.

If you encounter any issues or have questions regarding your Polibi Twin-Over-Full Wooden Bunk Bed with Trundle, please contact Polibi Customer Support:

• Sipò sou entènèt: Vizite la Polibi Brand Store on Amazon pou kesyon yo poze souvan (FAQ) ak opsyon pou kontakte nou.
• Imèl/Telefòn: Refer to your product packaging or the Polibi websit la pou jwenn enfòmasyon kontak ki pi resan yo.