WORKPRO 3.6V Cordless Grass and Shrub Shear User Manual

Entwodiksyon

Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.

Enfòmasyon sou Sekirite

Toujou obsève prekosyon sekirite debaz yo lè w ap itilize zouti elektrik pou diminye risk dife, chòk elektrik, ak aksidan pèsonèl.

• Li Manyèl la: Li epi konprann tout enstriksyon yo anvan ou itilize zouti a.
• Kenbe Zòn nan Vrèman: Kenbe timoun, moun ki bò kote w, ak bèt kay lwen zòn operasyon an.
• Mete ekipman pwoteksyon: Always wear safety glasses, gloves, and appropriate footwear.
• Avoid Contact with Blades: Never touch the blades while the tool is running or connected to power.
• Secure grip: Toujou kenbe zouti a byen fèm ak tou de men pandan w ap itilize li.
• Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
• Chaje: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
• Depo: Sere zouti a nan yon kote ki sèk, an sekirite, kote timoun yo pa ka rive.

Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.

Kontni pake

Verifye ke tout atik yo prezan epi yo an bon kondisyon lè w ap debale yo:

• 1 x WORKPRO Grass and Shrub Shear Unit
• 1 x Grass Blade (75 mm wide)
• 1 x Shrub Blade (120 mm length)
• 1 x tip-C chaje kab
• 1 x manyèl itilizatè

Pwodwi souview

Familiarize yourself with the components of your WORKPRO shear:

Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.

• Inite Prensipal: Ergonomic body with integrated motor and battery.
• Grass Blade: Designed for trimming grass edges, 75mm cutting width.
• Shrub Blade: Designed for shaping shrubs and small branches, 120mm cutting length.
• Kalite-C chaje pò: Pou rechaje batri entèn lan.
• Bouton bloke sekirite: Anpeche demaraj aksidantèl.
• ON / OFF switch: Activates the motor when the safety lock is disengaged.
• Bouton lage lam: Allows for quick and easy blade changes.
• TPR Anti-Slip Handle: Bay yon priz konfòtab ak an sekirite.

Enstalasyon

Chaje batri a

The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.

1. Locate the Type-C charging port on the tool.
2. Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
3. The charging indicator light will illuminate (typically red) during charging.
4. Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
5. Dekonekte plato a yon fwa chaje fini.

Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.

Enstale / Chanje lam

Ensure the tool is turned off and disconnected from any power source before changing blades.

1. Press the Blade Release Button located on the top of the tool.
2. Carefully remove the currently installed blade by pulling it away from the unit.
3. Align the desired blade (grass or shrub) with the slot on the tool.
4. Pouse lam la byen fèm nan plas li jiskaske li fè yon klik, sa ki montre li byen bloke.
5. Verify the blade is securely attached by gently pulling on it.

Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.

Enstriksyon Operasyon

Always wear appropriate safety gear before operating the shear.

Kòmanse ak kanpe zouti a

1. Ensure the desired blade is securely installed.
2. Kenbe zouti a byen fèm.
3. To start, press and hold the Safety Lock-off Button with your thumb.
4. While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
5. To stop, release the ON/OFF Switch. The blades will stop.

Using the Grass Shear Blade

The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.

• Ensure the grass blade (75mm wide) is installed.
• Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
• Move the tool slowly and steadily along the grass edge.
• Avoid cutting wet grass, as it can clog the blades and reduce efficiency.

Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.

Using the Shrub Shear Blade

The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.

• Ensure the shrub blade (120mm length) is installed.
• Hold the tool at a comfortable angle for trimming.
• Work in small sections, making smooth, even passes.
• Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.

Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.

Antretyen

Antretyen regilye asire pèfòmans optimal epi pwolonje lavi zouti ou a.

Netwayaj

• Always turn off the tool and remove the blade before cleaning.
• Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
• Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
• Wipe the blades with a lightly oiled cloth to prevent rust.

Swen lam

• The blades are made of premium 65Mn steel for high hardness and wear resistance.
• Inspect blades regularly for damage or dullness.
• If blades become dull, they can be sharpened by a professional or replaced.
• Store blades in a dry place to prevent corrosion.

Imaj: Gwo plan view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.

Depo

• Sere zouti a nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak imidite.
• Ensure the battery is partially charged (around 50%) before long-term storage to maintain battery health.
• Keep out of reach of children and unauthorized users.

Depanaj

Espesifikasyon

Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.

Garanti ak sipò

Pou enfòmasyon sou garanti a oswa pou sipò teknik, tanpri kontakte manifakti a oswa kote ou te achte a. Kenbe resi acha ou kòm prèv acha.

Manifakti: Konpayi Endistriyèl Hang Zhou Great Star, LTD

For further assistance, visit the WORKPRO official websit oswa kontakte sèvis kliyan yo.