UTV Stereo Subwoofer RCA Output and Remote Wire Harness Instruction Manual

Entwodiksyon

This manual provides detailed instructions for the installation and use of the UTV Stereo Subwoofer RCA Output and Remote Wire Harness. This product is designed to integrate an aftermarket subwoofer amplifier with your Polaris RZR's Ride Command system, allowing for bass control directly from the Ride Command screen.

The harness is water-resistant (IP66 Dust/Splash Proof) and engineered for the demanding off-road environment of Polaris RZR vehicles.

Konpatibilite

This harness is compatible with the following Polaris RZR models:

• Polaris RZR Pro R
• Polaris RZR Turbo R
• Polaris RZR Pro XP

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• UTV Stereo Subwoofer RCA Output and Remote Wire Harness (Model: UTVS-PRO-RC-SUB-OUT)

Image 1: The UTV Stereo Subwoofer RCA Output and Remote Wire Harness. This image displays the complete harness, featuring the RCA output connectors, the remote turn-on wire, and the vehicle-specific connector for integration with the Polaris RZR Ride Command system.

Imaj 2: Yon moun ki pi pre view of the UTV Stereo Subwoofer RCA Output and Remote Wire Harness. This image highlights the RCA connectors and the remote wire, providing a detailed look at the output side of the harness.

Enstalasyon ak Enstalasyon

This harness is designed for a plug-and-play installation. Follow these steps to connect your subwoofer amplifier to the Ride Command system:

1. Sekirite Premye: Before beginning any electrical work, ensure the vehicle's battery is disconnected to prevent electrical shorts or damage.
2. Locate Ride Command Connection Point: Identify the appropriate connection point on your Polaris RZR's Ride Command system. Refer to your RZR's service manual for the exact location if needed. The harness is designed to click directly into the factory wiring.
3. Konekte ekipay la: Plug the vehicle-specific connector of the UTV Stereo harness into the designated port on the Ride Command system. Ensure a secure connection.
4. Connect RCA Outputs: Connect the RCA output cables from the UTV Stereo harness to the RCA input jacks on your subwoofer amplifier. The harness provides a dedicated subwoofer output.
5. Connect Remote Turn-On Wire: Connect the blue remote turn-on wire from the UTV Stereo harness to the remote turn-on input on your subwoofer amplifizè. Fil sa a siyalize amplifier to turn on and off with the Ride Command system.
6. Sekirize fil elektrik: Route and secure all wiring away from moving parts, heat sources, and sharp edges using zip ties or other appropriate fasteners.
7. Rekonekte batri: Yon fwa tout koneksyon yo fèt epi yo byen sere, konekte batri machin nan ankò.
8. Sistèm tès: Power on your RZR and the Ride Command system. Verify that the subwoofer amplifier powers on and that you can control the bass output through the Ride Command interface.

For optimal performance, ensure your subwoofer amplifier is properly grounded and powered according to its own installation instructions.

Operasyon

Once installed, the UTV Stereo Subwoofer RCA Output and Remote Wire Harness enables seamless control of your subwoofer amplifier directly through the Polaris RZR Ride Command system.

• Pouvwa kontwòl: The remote turn-on wire ensures your subwoofer amplifier powers on and off automatically with the vehicle's ignition and Ride Command system.
• Kontwòl bas: Adjust the subwoofer's bass level directly from the audio settings menu within your Ride Command display. Refer to your Ride Command user manual for specific navigation steps to access audio equalization and subwoofer level controls.

Antretyen

The UTV Stereo Subwoofer RCA Output and Remote Wire Harness is designed for durability in off-road conditions. To ensure long-lasting performance:

• Enspeksyon regilye: Periodically inspect all connections for tightness and signs of wear or corrosion, especially after off-road excursions or exposure to water/mud.
• Netwayaj: While the harness is water-resistant (IP66), avoid direct high-pressure washing of electrical connections. If cleaning is necessary, use a damp cloth and mild detergent, ensuring all connections are dry before operating the vehicle.
• Pwoteksyon: Ensure the harness remains securely routed and protected from physical damage, excessive heat, and sharp objects.

Depanaj

If you encounter issues with your subwoofer system after installing the harness, consider the following:

If these steps do not resolve the issue, please contact UTV Stereo customer support for further assistance.

Espesifikasyon

Sipò ak enfòmasyon kontak

For technical support, warranty inquiries, or additional product information, please contact UTV Stereo directly.

Visit the official UTV Stereo websit la oubyen gade dokiman acha ou a pou jwenn enfòmasyon kontak ki pi resan yo.

UTV Stereo is a USA-based company dedicated to providing high-quality audio solutions for UTVs.