1. Entwodiksyon ak souview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
Karakteristik kle yo enkli:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- Ekipman pouvwa mobil: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- LED Light Functions: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
2. Enstalasyon ak Premye Itilizasyon
2.1 Chaje Aparèy la
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. Operasyon Enstriksyon
3.1 Demare yon Veyikil
- Asire demaraj so a konplètman chaje.
- Konekte batri entelijan cl laamp to the jump starter.
- Tache wouj (+) clamp nan tèminal pozitif batri machin nan.
- Tache nwa (-) clamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Demarre motè machin nan.
- Yon fwa machin nan kòmanse, retire klowòks la imedyatman.amps from the vehicle battery, then disconnect the smart battery clamp soti nan starter la so.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
3.2 Using the Air Compressor
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
3.3 Itilizasyon kòm yon Bank Pouvwa
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- USB Sòti 1: 5V=3A, 9V=2A, 12V=1.5A
- USB Sòti 2: 5V = 2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
3.4 Fonksyon Limyè LED
The device includes multiple LED light modes:
- Limyè ki estab: Pou ekleraj jeneral.
- Mòd SOS: Pou siyal ijans.
- Limyè strobo: For attracting attention.
Press the light button to cycle through the different modes.
4. Antretyen
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- Chaj regilye: Rechaje aparèy la chak 3-6 mwa, menm si w pa ap itilize l, pou kenbe batri a an bon eta.
- Depo: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye deyò aparèy la. Pa sèvi ak pwodui chimik ki agresif oswa materyèl abrazif.
- Enspeksyon kab: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
NAN. Depanaj
Gade tablo ki anba a pou pwoblèm komen ak solisyon yo:
| Mesaj Erè | Kòz | Solisyon |
|---|---|---|
| ERÈ | Jumper cables connected with reversed polarity to the car battery. | Konekte batri a clamps to the correct positive and negative terminals. |
| BAS | Kòrèkteman konekte batri machin, men batri voltage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| SOTI NAN | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| KÒMANSE | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| KÒMANSE | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. Espesifikasyon
Detailed technical specifications for the Enthuze ENT-TD6000:
| Paramèt | Valè |
|---|---|
| Non pwodwi | Sote Starter ak Air Compressor |
| Modèl | ENT-TD6000 |
| Gwosè | 193 x 110 x 53mm |
| Ranje presyon enflasyon | 0.2-8bar / 3-120psi |
| Tanperati Fonksyònman | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| Tanperati Depo | -10 ° C ~ 50 ° C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| Kapasite batri | 41.44Wh (14.8V, 2.8Ah) |
| Travay bri | Mwens pase 80dB lwen 1 mèt |
| Chaje Antre | 5V = 3A |
| Tan pou chaje | Apeprè 3.5 èdtan |
| USB Sòti 1 | 5V=3A, 9V=2A, 12V=1.5A |
| USB Sòti 2 | 5V = 2.1A |
| Air Pressure Sensor Accuracy | ± 1psi |
| Kòmanse Machin Voltage | 12V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. Avètisman Sekirite Enpòtan
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- Sèlman chaje batri entèn la nan yon zòn ki byen vantile.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- Risk pou blese moun. Pa sèvi ak pwodui sa a si kòd elektrik la oswa câbles batri yo domaje nenpòt fason.
- Aparèy sa a pa fèt pou itilize nan yon etablisman reparasyon komèsyal yo.
- Aparèy sa a fèt pou yo estoke andedan kay la lè li pa itilize. Aparèy sa a pa dwe estoke oswa kite deyò lè li pa itilize.
- Aparèy sa a fèt pou itilize pou yon ti tan deyò epi yo ta dwe pran swen rezonab lè w ap itilize aparèy sa a nan kondisyon mouye.
8. Garanti ak sipò
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.
