1. Entwodiksyon
This manual provides detailed instructions for the assembly, use, and maintenance of the Acme Katia Queen Bed, Model BD00660Q. The Katia Queen Bed features a modern rustic design with a white frame and gray linen upholstered headboard and footboard. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2. Enfòmasyon sou Sekirite
- Always use with a box spring for proper mattress support and bed stability.
- Exercise caution during assembly and use to avoid injury from sharp edges or heavy components.
- Due to the weight of the components, it is recommended that assembly be performed by two adults.
- Ensure all fasteners are securely tightened before using the bed. Periodically check and re-tighten as needed.
- Do not allow children to climb on or play with the bed frame during or after assembly.
3. Pake kontni
Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, contact Acme customer support.
- One (1) Queen Bed Headboard
- One (1) Queen Bed Footboard
- Two (2) Queen Bed Side Rails
- One (1) Four-piece Slat Kit with eight (8) support legs
Image: Main components of the Acme Katia Queen Bed frame, including the headboard, footboard, and side rails, ready for assembly. The gray linen upholstered panels contrast with the white frame.
4. Enstriksyon pou enstalasyon ak asanblaj
Assembly of the Acme Katia Queen Bed is required. Follow these general steps for proper construction. Specific hardware and detailed diagrams are typically included in a separate assembly guide within the product packaging.
- Depake konpozan: Retire tout pyès yo nan anbalaj la avèk prekosyon. Mete yo sou yon sifas mou epi pwòp pou evite reyur.
- Atache ray bò yo nan tèt kabann nan: Connect the side rails to the headboard using the provided hardware. Ensure connections are secure but do not fully tighten bolts until all major components are assembled.
- Atache ray bò yo nan pye tablo a: Connect the other end of the side rails to the footboard. Align all holes and insert hardware.
- Install Slat Kit: Place the four-piece slat kit within the bed frame. Ensure the support legs are properly attached to the slats and positioned to provide even support across the frame.
- Sere final la: Yon fwa tout konpozan yo an plas epi yo aliyen, sere boulon ak vis yo nèt. Pa sere yo twòp.
- Pozisyon Kabann: Deplase ankadreman kabann lan avèk prekosyon nan plas ou vle a.
Imaj: Yon bò view of the assembled Acme Katia Queen Bed, showing a mattress and bedding in place. This illustrates the bed's profile and how a mattress sits within the frame.
5. Operasyon Enstriksyon
The Acme Katia Queen Bed is designed to accommodate a standard queen-sized mattress. A box spring is required for proper mattress support and to ensure the longevity and stability of the bed frame. Place your box spring directly onto the installed slat kit, followed by your queen-sized mattress.
Image: This image presents the Acme Katia Queen Bed as part of a complete bedroom set, showcasing its aesthetic within a decorated room. It highlights the bed's design and scale in a typical environment.
6. Antretyen
- Enspeksyon regilye: Enspekte tout boulon, vis, ak koneksyon yo detanzantan pou asire yo rete sere. Sere yo ankò jan sa nesesè pou kenbe entegrite estriktirèl la.
- Netwayaj ankadreman: Dust the white frame with a soft, dry cloth. For more stubborn marks, use a slightly damp siye twal la ak yon pwodui netwayaj dou ki pa abrazif, apresa siye l sèk imedyatman.
- Netwayaj amebleman: For the gray linen upholstered panels, gently vacuum to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For deeper cleaning, use a fabric cleaner specifically designed for linen, following the product's instructions. Test on an inconspicuous area first.
- Evite pwodwi chimik piman bouk: Do not use abrasive cleaners, solvents, or harsh chemicals on any part of the bed, as these can damage the finish or fabric.
NAN. Depanaj
- Bri k'ap kriye: If the bed produces squeaking noises, ensure all assembly bolts and screws are securely tightened. Verify that the slat kit is correctly installed and evenly distributed. Confirm that a box spring is in use, as it is essential for preventing excessive movement and potential noise.
- Enstabilite/Tranbleman: Check that the bed is placed on a level surface. Re-examine all assembly connections to ensure they are firm. Confirm that the slat support legs are making proper contact with the floor.
- Pyès ki manke/domaje: If you discover missing or damaged parts during unpacking or assembly, do not proceed with assembly. Contact Acme customer support immediately for assistance.
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | BD00660Q |
| Mak | Acme |
| Gwosè | Rèn |
| Dimansyon pwodwi (L x W x H) | 88"L x 65"L x 62"H |
| Koulè | Light Gray and White |
| Fini Kalite | Painted (Soft White Finish) |
| Materyèl | Poplar, Linen, Foam |
| Pwa atik | 152 liv |
| Asanble obligatwa | Wi |
| Somye obligatwa | Wi |
| UPC | 840412309700 |
| Manifakti | Acme Furniture |
9. Garanti ak sipò
For information regarding product warranty, replacement parts, or technical support, please contact Acme Furniture directly. It is recommended to retain your purchase receipt as proof of purchase when contacting customer service.
Acme Furniture Contact Information: Please refer to the contact details provided with your product packaging or visit the official Acme Furniture websit la pou jwenn enfòmasyon sipò ki pi resan yo.
