Polibi GX000323AAE

Polibi Logo

Polibi Twin Over Twin Bunk Bed User Manual

Model: GX000323AAE

Entwodiksyon

This user manual provides detailed instructions for the assembly, operation, and maintenance of your Polibi Twin Over Twin Bunk Bed. Designed for space efficiency, this bunk bed features built-in shelves and a convenient storage drawer, making it an ideal solution for shared rooms or maximizing living space. Please read this manual thoroughly before beginning assembly or use to ensure safe and proper installation and operation.

Polibi Twin Over Twin Bunk Bed with Shelves and Drawer

Image: Polibi Twin Over Twin Bunk Bed in grey, featuring built-in shelves and a pull-out storage drawer. The bed is shown in a room setting with mattresses and bedding.

Enfòmasyon sou Sekirite

AVÈTISMAN: Si ou pa swiv avètisman ak enstriksyon sa yo, sa ka lakòz blesi grav oswa lanmò.

  • Always follow the manufacturer's recommended mattress size and thickness.
  • Ensure all connections are tight and secure before use. Periodically check and tighten all fasteners.
  • Pa kite timoun ki poko gen 6 an monte sou kabann ki anlè a.
  • Entèdi plis pase yon moun sou etaj anwo a.
  • Entèdi jwèt cheval sou oswa anba kabann nan.
  • Toujou sèvi ak nechèl la pou antre epi kite etaj anwo a.
  • Pa sèvi ak pati ranplasan. Kontakte manifakti a pou pyès ranplasman.
  • Use of a nightlight may provide added safety for a child using the upper bunk.
  • Guardrails are essential for preventing falls from the upper bunk.
  • Pwodwi sa a pa fèt pou itilizasyon komèsyal.

Lis Pati

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

Pati Deskripsyon Kantite
Kad kabann Upper and Lower Bed Frames 2 ansanm
Planch Wooden slats for mattress support 14 pcs per bed
Guardrails Safety rails for upper bunk Enkli
Nechèl 4-step ladder for upper bunk access 1
Tiwa Depo Under-bed pull-out drawer 1
Built-in Shelves Integrated shelving units Enkli
Materyèl pake Screws, bolts, nuts, and tools 1 seri
Diagram showing bunk bed features: shelves, drawer, slats

Imaj: Eksploze view diagram highlighting key features such as the two built-in three-in-one storage shelves, the large storage drawer underneath the bed, and the number of slats per bed (14/14pcs).

Enstalasyon ak Asanble

Assembly typically requires two adults and can take approximately 4 hours. Follow the numbered steps carefully. Do not fully tighten screws until all pieces are in place for a given section, then tighten all connections securely.

  1. Depake epi òganize: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent scratches. Identify each part using the provided parts list.
  2. Rasanble Panno Side: Begin by attaching the side panels for both the upper and lower bunks, ensuring the built-in shelf sections are correctly oriented.
  3. Connect Headboards and Footboards: Securely attach the headboards and footboards to the assembled side panels for both bed sections.
  4. Enstale planch yo: Place and secure the wooden slats onto the support rails for both the upper and lower beds. Each slat requires individual screwing for maximum stability. Ensure all 14 slats per bed are properly installed.
  5. Rasanble nechèl la: Construct the ladder according to the instructions, ensuring all steps are firmly attached.
  6. Mete balistrad yo: Secure the guardrails to the upper bunk frame. These are crucial safety components.
  7. Assemble Storage Drawer: Put together the components of the storage drawer. Once assembled, slide it into the designated space under the lower bunk.
  8. Sere final la: Once all major components are in place, go back and securely tighten all screws and fasteners. Do not overtighten.

Note: The product comes in 2 packages. Refer to the clear instructions and hardware included in the packaging for detailed step-by-step diagrams.

Enstriksyon Operasyon

Rekòmandasyon matla:

  • Kabann anwo: Recommended mattress thickness is 6 inches.
  • Kabann ki pi ba a: Recommended mattress thickness is 8-10 inches.
  • Ensure the mattress on the upper bunk does not exceed the height of the guardrails for safety.

Sèvi ak tiwa depo a:

The large storage drawer located underneath the lower bed provides convenient space for linens, toys, or other daily necessities. Simply pull the drawer out from the front to access its contents. Push it back in fully when not in use to keep the area tidy.

Polibi Bunk Bed with storage drawer pulled out

Imaj: Devan view of the Polibi Twin Over Twin Bunk Bed with the under-bed storage drawer partially pulled out, showcasing its capacity for storing items like clothes or bedding.

Utilizing Built-in Shelves:

The three-in-one built-in shelves beside both the upper and lower beds are designed for storing books, small decor items, or personal belongings. Organize items neatly to maximize space and maintain accessibility.

Antretyen

  • Netwayaj: Siye ankadreman kabann lan avèk yon twal mou.amp twal. Evite itilize pwodui chimik ki agresif oswa pwodui netwayaj abrazif, paske sa yo ka domaje fini an.
  • Tcheke Fastener: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and fasteners to ensure they are tight. Re-tighten as necessary to maintain structural integrity and prevent wobbling.
  • Enspeksyon planch: Check the wooden slats regularly for any signs of damage, cracks, or excessive wear. Replace any damaged slats immediately to ensure proper mattress support.
  • Antretyen tiwa: Kenbe ray tiwa yo pwòp epi san debri pou asire yo fonksyone byen.

Depanaj

Pwoblèm Kòz posib Solisyon
Kabann nan ap tranble oswa li santi l enstab Fich ki lach; planche inegal Tcheke epi sere tout boulon ak vis yo. Asire w ke kabann nan sou yon sifas ki plat.
Storage drawer sticks or is difficult to open/close Debris in tracks; misaligned drawer; damaged tracks Clean tracks of any dust or objects. Re-align the drawer. Inspect tracks for damage.
Slats creak or feel weak Loose screws; damaged slats; incorrect mattress weight Ensure all slat screws are tight. Inspect slats for cracks and replace if necessary. Verify mattress weight is within limits.
Pyès ki manke oswa domaje lè yo rive Shipping error or manufacturing defect Do not assemble. Contact Polibi customer support immediately for replacement parts.

Espesifikasyon

  • Modèl: GX000323AAE
  • Kalite: Twin sou Twin Bunk Bed
  • Koulè: Gri
  • Materyèl: Bwa
  • Dimansyon jeneral: 78.3''L x 48.7''L x 68.9''H
  • Upper Bed Weight Capability: 400 liv
  • Lower Bed Weight Capability: 400 liv
  • Number of Slats (each bed): 14 pcs
  • Recommended Upper Mattress Thickness: 6 pous
  • Recommended Lower Mattress Thickness: 8-10 pous
  • Pwa atik: 196 liv
  • Manifakti: polibi
  • Peyi orijin: Vyetnam
Polibi Bunk Bed dimensions diagram

Image: Detailed diagram illustrating the dimensions of the Polibi Twin Over Twin Bunk Bed, including length, width, height, and internal measurements for the bed frames and shelves.

Garanti ak sipò

For warranty information, replacement parts, or technical support, please contact Polibi customer service. Keep your purchase receipt and model number (GX000323AAE) readily available when contacting support.

Polibi Customer Service: Refer to the contact information provided with your product packaging or visit the official Polibi websit la pou jwenn dènye enfòmasyon sou sipò a.

You can also visit the Polibi store on Amazon for more information: Polibi Amazon Store

Dokiman ki gen rapò - GX000323AAE

Preview Assembly Instructions: Polibi Twin/Full Bunk Bed with Desk (WF290950, WF290951)
Comprehensive assembly guide for the Polibi Twin/Full Bunk Bed with Desk, featuring model numbers WF290950 and WF290951. Includes detailed safety warnings, a complete parts list, hardware inventory, and step-by-step visual instructions with textual descriptions.
Preview Twin Twin House Bunk Bed Assembly Instructions
Comprehensive assembly instructions for the Twin Twin House Bunk Bed, including safety warnings, parts list, hardware list, and step-by-step assembly diagrams with detailed textual descriptions.
Preview Assembly Instructions for WF197908/WF197909 Bunk Bed
Detailed assembly instructions for the WF197908/WF197909 bunk bed, including part lists, hardware details, and step-by-step guidance. Learn how to assemble your bunk bed safely and correctly.
Preview Polibi Loft Bed Assembly Instructions (WF301849/301850)
Detailed assembly instructions for the Polibi Loft Bed, model numbers WF301849 and WF301850. Includes safety warnings, parts list, hardware list, and step-by-step guidance for building the metal house bunk bed with slide and staircase.
Preview Assembly Instructions for Queen Size Upholstered Wood Platform Bed with Headboard and 2 Drawers
Step-by-step assembly instructions for a gray queen size upholstered wood platform bed with a headboard and two drawers. Includes safety warnings, part lists, hardware lists, and assembly steps.
Preview House Bed Assembly Instructions WF286771
Assembly instructions for the House Bed, SKU Code WF286771. Includes part list, hardware list, and step-by-step assembly guide.