BETAFPV VR03 FPV linèt manyèl itilizatè

1. Entwodiksyon

The BETAFPV VR03 FPV Goggles are designed to provide an immersive First Person View experience for FPV racing drones and model airplanes. Featuring a 4.3-inch 800x480px HD LCD screen, these goggles offer clear visuals without distortion. The integrated DVR function allows for recording and replaying flight footage, enhancing the user experience. The goggles operate on the 5.8GHz frequency band with 48 channels and support NTSC/PAL video formats.

Imaj: Devan view of the BETAFPV VR03 FPV Goggles, showcasing konsepsyon kontra enfòmèl ant yo.

2. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• BETAFPV VR03 FPV linèt
• Replaceable 5.8G 3dBi Omnidirectional Antenna
• Bando reglabl
• USB Kalite-C Chaje Kab
• Manyèl itilizatè

Image: The VR03 FPV Goggles, its packaging, and included accessories like the headband and user manual.

3. Pwodwi Dyagram

Familiarize yourself with the components and controls of the VR03 FPV Goggles.

Image: A detailed diagram highlighting the Type-C Port, Charging Indicator, Power On/Off switch, Recording Indicator, Recording Button, Channel Up (CH+), Band Up (Band+), Search button, Micro SD Card Slot, and Antenna.

• Kalite-C Port: Pou chaje batri entèn lan.
• Endikatè chaje: Montre estati chaj la.
• Bouton On/Off: Controls the main power.
• Endikatè anrejistreman: Lights up when DVR recording is active.
• Bouton anrejistreman: Initiates or stops DVR recording.
• CH+ Button: Changes the video channel.
• Band+ Button: Changes the video band.
• Bouton rechèch: Activates the auto-search function for video signals.
• Mikwo SD kat plas: For inserting a Micro SD card (not included) for DVR recording.
• Antèn: Replaceable 5.8G 3dBi omnidirectional antenna for video reception.

4. Enstalasyon

4.1. Enstalasyon antèn

1. Locate the antenna connector on the side of the goggles.
2. Carefully screw the provided 5.8G 3dBi omnidirectional antenna onto the connector until it is finger-tight. Do not overtighten.

4.2. Chaje batri a

1. Connect the USB Type-C charging cable to the Type-C port on the goggles.
2. Konekte lòt bout kab la ak yon sous kouran USB konpatib (pa egzanp, yon pò USB òdinatè, yon adaptè USB nan miray).
3. The Charging Indicator will illuminate during charging and turn off when fully charged.
4. A full charge provides approximately 2 hours of normal operation or 1 hour and 10 minutes in recording mode.

Image: Illustration showing the built-in 2000mAh battery and its approximate operating times for normal and recording modes.

4.3. Mete yon Kat Mikwo SD

1. Locate the Micro SD Card Slot on the side of the goggles.
2. Insert a Micro SD card (Class 10 or higher recommended, up to 64GB) with the contacts facing down until it clicks into place.
3. Pou retire li, pouse kat la dousman jiskaske li soti.

5. Operasyon Enstriksyon

5.1. Powering On / Off

• To power on, slide the Power On/Off switch to the "On" position.
• To power off, slide the Power On/Off switch to the "Off" position.

5.2. Automatic Frequency Search

The goggles feature a fast auto-search function to find the strongest video signal.

1. Ensure your FPV drone or video transmitter is powered on and transmitting.
2. Peze a Bouton rechèch (S button) on the goggles.
3. The goggles will scan all 48 channels and automatically lock onto the channel with the strongest signal within approximately 3 seconds.

Image: Visual representation of the one-key auto-search function, showing the button, band results, and instant display.

5.3. Manual Band and Channel Selection

If automatic search does not yield the desired result, you can manually select the band and channel.

1. Peze a Band+ Button to cycle through the available frequency bands (A, B, E, F, R, L).
2. Once the desired band is selected, press the CH+ bouton to cycle through the channels (1-8) within that band.
3. Refer to the frequency table below for specific channel frequencies.

Image: A table detailing the 5.8GHz frequency bands and their corresponding channels in MHz.

5.4. DVR Recording

The VR03 FPV Goggles allow you to record your flight footage directly to a Micro SD card.

1. Ensure a Micro SD card is inserted into the goggles.
2. With the goggles powered on and receiving a video signal, press the Bouton anrejistreman (red dot button).
3. The Recording Indicator will illuminate, indicating that recording has started.
4. Pou sispann anrejistreman, peze la Bouton anrejistreman again. The indicator will turn off.
5. Recorded videos are saved as AVI files sou kat Micro SD la.

Imaj: A view through the goggles showing an FPV feed with on-screen display elements, illustrating the DVR recording capability.

5.5. lèktur

Ou ka review anrejistre footage directly on the goggles.

1. Pandan ke nan nòmal viewmòd, peze epi kenbe la Bouton anrejistreman for approximately 3 seconds to enter playback mode.
2. Sèvi ak la CH+ epi Gwoup+ buttons to navigate through recorded files.
3. Peze a Bouton anrejistreman briefly to play or pause a selected video.
4. To exit playback mode, press and hold the Bouton anrejistreman ankò pou 3 segonn.

6. Antretyen

6.1. Netwayaj

• Use a soft, dry cloth to clean the exterior of the goggles.
• For the LCD screen, use a specialized screen cleaning cloth and solution if necessary, applying gently to avoid scratches.
• Keep the foam faceplate clean and dry.

6.2. Swen batri

• Avoid fully discharging the Lithium Polymer battery.
• Store the goggles with the battery partially charged (around 50%) if not used for extended periods.
• Pa ekspoze batri a nan tanperati ekstrèm.

6.3. Depo

• Store the goggles in a cool, dry place away from direct sunlight.
• Protect the screen from pressure or sharp objects.

NAN. Depanaj

• Pa gen siyal videyo:
  • Ensure the FPV drone/video transmitter is powered on and transmitting.
  • Verify the antenna is securely attached to the goggles.
  • Perform an automatic frequency search.
  • Manually cycle through bands and channels to find the correct frequency.
  • Check for obstructions between the drone and goggles.
• Poor Video Quality/Static:
  • Asire w antèn lan byen konekte epi li pa domaje.
  • Try a different channel or band.
  • Reduce the distance between the drone and goggles.
  • Minimize entèferans ki soti nan lòt aparèy 5.8GHz yo.
• DVR pa anrejistre:
  • Asire w ke kat Micro SD a byen mete.
  • Check if the Micro SD card has sufficient free space.
  • Verify the Micro SD card is formatted correctly (FAT32 recommended).
  • Ensure the card is Class 10 or higher.
  • Reformat the Micro SD card if issues persist (this will erase all data).
• Goggles Not Powering On:
  • Ensure the battery is charged. Connect to a charger and check the Charging Indicator.
  • Verifye ke switch pouvwa a nan pozisyon "On" an.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, technical support, or service inquiries, please contact BETAFPV directly using the information below. Keep your purchase receipt as proof of purchase.

• Manifakti: Shenzhen Baida Moxing co, Ltd.
• Websit: betafpv.com
• Sipò Imèl: support@betafpv.com

For additional resources and community engagement, you can visit BETAFPV's social media channels:

• Instagbelye mouton: @betafpv
• Facebook: BETAFPV
• YouTube: BETAFPV Official