1. Entwodiksyon
The Alula RE622 Series CryptiX NanoMax Door and Window Sensor is a compact, full-featured security transmitter designed to detect the opening and closing of doors and windows. Its small profile allows for discreet installation, and it utilizes encrypted transmissions for enhanced security. The sensor can also be used with external contacts for broader application, providing reliable security monitoring for your home or business.
A compact white Alula RE622 Series CryptiX NanoMax Door and Window Sensor, consisting of two main parts: the sensor unit and a smaller magnet unit, designed for discreet installation.
2. Pwodwi Features
- Smallest full-featured security transmitter in the industry.
- Utilizes encrypted transmissions for enhanced security.
- Designed for flexible magnet positioning to accommodate various installation needs.
- Features quick peel and press mounting for easy installation.
- Includes Strip and Stick external contact holes for expanded functionality.
3. Pake kontni
Tanpri verifye ke tout atik yo prezan nan pakè ou a:
- Alula RE622 Series CryptiX NanoMax Sensor Unit
- Magnet Unit
- Mounting Adhesive (pre-applied or separate strips)
- Manyèl itilizatè sa a
4. Enstalasyon ak Enstalasyon
- Preparasyon: Choose a clean, dry, and flat surface for mounting. Ensure the surface is free of dust, grease, or debris.
- Mounting the Sensor and Magnet:
- Peel the protective backing from the adhesive on both the sensor unit and the magnet unit.
- Align the sensor unit on the door/window frame and the magnet unit on the moving part (door/window) so that they are no more than 0.5 inches (1.27 cm) apart when the door/window is closed. The alignment marks on both units should face each other.
- Press firmly for at least 30 seconds to ensure proper adhesion.
- External Contacts (Optional): If using external contacts, connect them to the designated Strip and Stick terminals on the sensor unit. Refer to your security system's manual for wiring diagrams.
- Entegrasyon sistèm: Enroll the RE622 sensor with your compatible Alula security system. Follow the specific instructions provided in your security system's installation guide for adding new wireless devices.
5. Operasyon Enstriksyon
The Alula RE622 Series CryptiX NanoMax sensor operates by detecting the separation of its main unit from the magnet unit, or the opening of an external contact connected to it. When the monitored door or window is opened, or the external contact circuit is broken, the sensor transmits a signal to your security system, triggering an alarm or notification based on your system's programming.
- Eta nòmal: When the door/window is closed, the sensor and magnet are in close proximity, and the external contact (if used) is closed. The sensor is in a secure, non-alarm state.
- Eta Alam: When the door/window is opened, causing the sensor and magnet to separate, or when the external contact is opened, the sensor immediately transmits an alarm signal to your security panel.
6. Antretyen
- Netwayaj: To clean the sensor, gently wipe it with a dry, soft cloth. Do not use abrasive cleaners, solvents, or spray directly onto the device, as this may damage the electronics or finish.
- Ranplasman batri: The RE622 sensor is battery-powered. While batteries are not included in the initial package, they are required for operation. When the battery level is low, your security system will typically indicate a low battery condition for the sensor. To replace the battery, carefully open the sensor casing (refer to your system's manual for specific instructions if needed) and replace the old battery with a new 3-volt DC battery of the specified type. Ensure correct polarity.
- Tès peryodik: It is recommended to periodically test the sensor's functionality (e.g., once a month) to ensure it is communicating properly with your security system. Consult your security system's user manual for instructions on how to perform a system test.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Sensor not responding or not enrolling. | Low or dead battery; sensor too far from panel; interference; incorrect enrollment procedure. | Replace battery; move sensor closer to the security panel; check for sources of interference; re-attempt enrollment following system instructions. |
| Fo alam. | Sensor or magnet misalignment; loose mounting; vibration. | Re-align sensor and magnet; ensure both units are securely mounted; check for excessive vibration on the door/window. |
| External contact not working. | Incorrect wiring; faulty external contact. | Verify wiring connections; test the external contact separately; replace external contact if faulty. |
8. Espesifikasyon
| Atribi | Detay |
|---|---|
| Nimewo Modèl | RE622 |
| Kalite aliye | Mòn adezif |
| Sensor Teknoloji | Kontakte Capteur |
| Sous pouvwa | Batri Powered |
| Voltage | 3 Vòlt (DC) |
| Koulè | Blan |
| Dimansyon pake | 2 x 1 x 1 pous |
| Manifakti | Alula |
| UPC | 857744008171 |
9. Garanti ak sipò
For warranty information and technical support, please refer to the documentation provided with your Alula security system or visit the official Alula website. You can also contact Alula customer service directly for assistance with product registration, troubleshooting, or any other inquiries related to your RE622 Series CryptiX NanoMax sensor.
Alula Official Websit: https://alula.com
