Entwodiksyon
This manual provides essential information for the setup, operation, and maintenance of your Humanscale eFloat Go Desk. The eFloat Go is an electric height-adjustable table designed to promote active working by allowing seamless transitions between sitting and standing positions.
It features innovative anti-collision technology, quiet motors, and a programmable hand switch for personalized height settings.
Enfòmasyon sou Sekirite
Please read all safety instructions before assembly and operation. Failure to do so may result in injury or damage to the product.
- The maximum weight capacity for this desk is 250 livPa depase limit sa a.
- Ensure all cables are properly managed to prevent tripping hazards or entanglement during height adjustments.
- Keep hands and objects clear of moving parts during operation to avoid pinching or crushing.
- The desk is equipped with anti-collision technology, but always exercise caution.
- Assembly requires careful attention to instructions. It is recommended that at least one person is available for assembly.
Enstalasyon
The Humanscale eFloat Go Desk is designed for quick assembly, typically taking under 5 minutes. Follow the detailed assembly instructions provided in the packaging. Ensure all components are present before beginning.
Debalaj ak enspeksyon
- Louvri anbalaj la avèk prekosyon epi retire tout konpozan yo.
- Verify that all parts listed in the assembly guide are included and undamaged.
- Place components on a soft, clean surface to prevent scratches during assembly.
Etap Asanble
- Attach the desk legs to the tabletop using the provided hardware. Ensure all screws are tightened securely.
- Connect the motor cables according to the diagram in the assembly guide.
- Mount the programmable hand switch to the underside of the desk in a convenient location.
- Ploge kòd elektrik la nan yon priz elektrik ki gen tè.
- Perform an initial test run to ensure smooth operation.
Figure 1: Desk Dimensions. This image illustrates the overall dimensions of the eFloat Go Desk, including its depth, width, and height, which are crucial for planning your workspace.
Figure 2: Assembled Desk. This image shows the fully assembled Humanscale eFloat Go Desk, highlighting its white base and bamboo top, ready for use in an office or home environment.
Enstriksyon Operasyon
The eFloat Go Desk features an intuitive programmable hand switch for easy height adjustments.
Operasyon debaz
- To raise the desk, press and hold the Flèch moute bouton.
- To lower the desk, press and hold the Flèch desann bouton.
- Lage bouton an nan wotè ou vle a.
Programming Height Presets
The hand switch allows you to save up to three preferred height settings.
- Adjust the desk to your desired height for the first preset.
- Peze a M button (Memory). The display will show 'S-'.
- Within 3 seconds, press the desired preset number button ('1', '2', oswa '3'). The display will show 'S-1', 'S-2', or 'S-3' to confirm the setting.
- Repeat for other desired height presets.
Raple Prereglaj
To move the desk to a saved height, simply press the corresponding preset number button ('1', '2', oswa '3'). The desk will automatically adjust to the saved position.
Figure 3: Control Panel. This image provides a detailed view of the desk's control panel, showing the buttons for height adjustment and memory presets.
Antretyen
Regular maintenance ensures the longevity and optimal performance of your eFloat Go Desk.
- Netwayaj: Wipe the desk surfaces with a dry cloth or a damp twal. Evite pwodui netwayaj abrazif oswa pwodui chimik piman bouk ki ka domaje fini an.
- Jesyon kab: Tcheke epi òganize kab yo detanzantan pou evite yo mele oswa entèfere ak mouvman biwo a.
- Tcheke Fastener: Every few months, inspect all screws and fasteners to ensure they remain tight. Retighten if necessary.
- Swen motè: The desk's motors are designed for quiet operation and require no special lubrication. If you notice unusual noises, refer to the troubleshooting section.
Depanaj
If you encounter issues with your eFloat Go Desk, refer to the following common problems and solutions.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Biwo a pa deplase. | Power cord unplugged; circuit breaker tripped; motor overload. | Check power connection. Reset circuit breaker. Unplug for 30 minutes, then retry. |
| Biwo a ap deplase yon fason inegal oswa li fè yon bri dwòl. | Loose fasteners; obstruction; uneven weight distribution. | Check and tighten all fasteners. Remove any obstructions. Redistribute weight evenly on the tabletop. |
| Height presets are not working. | Presets not properly saved; power interruption. | Reprogram the height presets following the "Programming Height Presets" section. |
| Anti-collision feature triggers too often. | Sensitive setting; minor obstruction. | Ensure no objects are near the desk's path. Consult Humanscale support for sensitivity adjustment if needed. |
If the problem persists after attempting these solutions, please contact Humanscale customer support.
Espesifikasyon
Key technical specifications for the Humanscale eFloat Go Desk:
- Nimewo Modèl: FTR2448BM_FG1224DW
- Dimansyon pwodwi (P x W x H): 23"D x 46"W x 26.5"H
- Gwosè tèt: 23" Depth x 46" Width
- Koulè: White on Bamboo
- Materyèl de baz: Metal
- Top materyèl: Banbou
- Karakteristik espesyal: Electric Height-Adjustable
- Pwa atik: 150 liv
- Rekòmandasyon pou pwa maksimòm: 250 liv
- Asanble obligatwa: Wi
Enfòmasyon sou Garanti
The Humanscale eFloat Go Desk is backed by a comprehensive warranty to ensure your peace of mind.
- Peryòd garanti: 10-Year, 24/7 Humanscale Warranty.
- Garanti sa a kouvri domaj nan materyèl ak atizan konn fè nan itilizasyon nòmal.
- For full warranty terms and conditions, please refer to the warranty card included with your product or visit the official Humanscale websit.
Sipò pou Kliyan
For further assistance, technical support, or warranty claims, please contact Humanscale customer service.
- Humanscale Official Websit: www.humanscale.com
- Refer to the product packaging or the Humanscale website for specific contact numbers or email addresses for your region.
