1. Entwodiksyon
The VDIAGTOOL V200 Automotive Circuit Tester is a versatile diagnostic tool designed for electrical system testing in 12V-24V vehicles. It combines multiple functions to assist in identifying and troubleshooting electrical faults efficiently.
Figure 1: VDIAGTOOL V200 Automotive Circuit Tester and included accessories.
2. Ki sa ki nan bwat la
- Awondisman Probe Tester
- Kab Ekstansyon (20 pye)
- Adaptè pi lejè sigarèt
- Manyèl itilizatè
Figure 2: All components included in the VDIAGTOOL V200 kit.
3. Enstalasyon
The V200 is powered by the vehicle's 12V-24V battery. Connect the red alligator clip to the positive (+) terminal and the black alligator clip to the negative (-) terminal of the vehicle battery. Alternatively, use the provided cigarette lighter adapter for power.
3.1 Alimente Aparèy la
- Koneksyon batri: Tache cl wouj laamp nan tèminal la batri pozitif ak cl nwa aamp nan tèminal negatif batri a.
- Cigarette Lighter Connection: Insert the cigarette lighter adapter into the vehicle's 12V accessory socket.
Video 1: Demonstrates the unboxing and initial setup of the VDIAGTOOL V200, including connecting to a car battery.
4. Operasyon Modes
The V200 supports four primary working modes, easily switchable with a single button press.
- DC Voltage tès: Detects the DC voltage value of the circuit under test with 0.1V resolution.
- AC Voltage tès: Detects Max/Min voltage, frequency, and duty cycle of the AC circuit.
- Tès Rezistans: Measures resistance between the probe tip and the auxiliary ground lead.
- Tès dyòd: Determines the operation and conductivity of diode assemblies.
Figure 3: The V200 display interface illustrating the four main working modes.
5. Fonksyon kle
5.1 Polarity Identification
The V200 automatically identifies circuit polarity. A red LED indicates a positive connection, while a green LED indicates a negative connection. No LED indicates an open circuit.
Figure 4: Visual representation of polarity identification using the V200's LED indicators.
5.2 Component Activation
This feature allows you to activate components (e.g., lights, motors, relays) by supplying power or ground directly from the probe, aiding in troubleshooting. Use caution to avoid damaging components by applying incorrect polarity or excessive current.
Figure 5: Illustration of component activation for testing a car bulb.
5.3 Continuity, Sensor/Signal Circuit Test
Perform continuity tests, check sensor states, and verify signal integrity within circuits. The tool can also help locate short circuits and bad grounds.
6. Karakteristik sekirite
6.1 Pwoteksyon Surcharge
The V200 features a built-in 8-amp circuit breaker. In case of an overload, the device will automatically shut down to protect itself and the tested components. A beep warning will also occur.
Figure 6: Visual indicator of the overload protection feature.
7. Espesifikasyon
- Dimansyon pwodwi: 1.85 x 1.1 x 7 pous
- Pwa atik: 1.17 Kilogram (2.58 Liv)
- Sous pouvwa: Corded Electric (12V-24V vehicle battery or cigarette lighter)
- Nimewo Modèl: VDT-V200-P
- Longè kòd: 20FT main cord + 20FT extension cord (Total 40FT)
- Karakteristik adisyonèl: Built-in flashlight, Tone On/Off Design
8. Antretyen
To ensure the longevity and optimal performance of your VDIAGTOOL V200, follow these general maintenance guidelines:
- Keep the device clean and free from dust, dirt, and moisture.
- Store the tester and its accessories in the provided sturdy case when not in use.
- Inspect cables and connectors regularly for any signs of wear or damage. Replace if necessary.
- Evite ekspoze aparèy la nan tanperati ekstrèm oswa limyè solèy la dirèk pou peryòd pwolonje.
NAN. Depanaj
If you encounter issues with your VDIAGTOOL V200, consider the following:
- Aparèy pa limen: Ensure secure connections to the vehicle's battery or cigarette lighter. Verify the vehicle's power source is active.
- No Reading/Incorrect Reading: Check that the probe tip is making good contact with the circuit. Ensure the correct operating mode is selected.
- Pwoteksyon Surcharge Deklanche: If the device shuts down with a beep, it indicates an overload. Disconnect the probe, allow a few moments, and then reconnect. Reduce the load or verify the circuit's specifications before retesting.
- Pwoblèm ekran: If the screen is blank or unresponsive, try disconnecting and reconnecting the power source.
10. Garanti & Sipò
VDIAGTOOL offers comprehensive support for the V200 Automotive Circuit Tester:
- Garanti: 3 Years Warranty.
- Asistans teknik: Asistans teknik pou tout lavi.
- Retounen: 60 Days No-Reason-asked Return for refund.
- Ranplasman Sond: Free probe replacement.
- Kontakte sipò: For any questions or assistance, kindly reach us via vdiagtool2@outlook.com.
