Entwodiksyon
This manual provides comprehensive instructions for setting up and operating your PPLEE Alarm Clock. Please read it thoroughly to ensure proper use and to take full advantage nan tout karakteristik.
Image: The PPLEE Alarm Clock displaying "12:00" with a smartphone connected for charging.
Enstalasyon
Power Source and Battery Backup
The PPLEE Alarm Clock is primarily powered by an AC outlet (100-240V). The included power adapter must be connected for all functions (digital display, phone charging, dimmer, etc.) to operate.
Imaj: Dèyè view of the alarm clock highlighting the power input and battery compartment.
For battery backup, install 2 AAA batteries (not included) into the designated compartment. These batteries are solely for memorizing time and alarm settings during a power outage. The display will go blank, but the alarm function will still work. No need to reset time when power is restored.
Image: What's in the box - Alarm clock, user manual, power adapter, and power cable.
Enstriksyon Operasyon
Time Setting (12H/24H & DST)
To set the time, press the "TIME/DST" button. The hour display will start flickering. Use the "+" or "-" buttons to adjust the hour. Press "TIME/DST" again to confirm the hour and move to minute setting. Adjust minutes with "+" or "-" and press "TIME/DST" to save.
To switch between 12-hour and 24-hour formats, press the "12/24H" button.
The clock also supports Daylight Saving Time (DST). Press and hold the "TIME/DST" button to activate or deactivate DST.
Imaj: Egzamples of 12H, 24H, and DST time displays.
Alarm Setting (Dual Alarms, Volume, Snooze)
This alarm clock features dual alarms (Alarm 1 and Alarm 2) for different schedules.
- To set Alarm 1, press the "ALARM 1" button. The hour display will flicker. Use "+" or "-" to set the hour, then press "ALARM 1" to confirm.
- The minute display will then flicker. Use "+" or "-" to set the minutes, then press "ALARM 1" to save.
- Repeat the process for Alarm 2 using the "ALARM 2" button.
Image: Visual representation of setting dual alarms for different wake-up times.
Ajisteman Volim Alam
The alarm volume can be adjusted to 7 different levels, ranging from 50dB to 120dB. Rotate the volume knob (located on the side/rear) to increase or decrease the alarm sound.
Image: A visual scale indicating the 7 adjustable volume levels for the alarm.
Fonksyon Snooze
When the alarm sounds, lightly touch the large "SNOOZE/NIGHT LIGHT" button on top to activate the 9-minute snooze function. The alarm will temporarily pause and sound again after 9 minutes.
Image: Demonstrating the touch-sensitive snooze button on top of the clock.
Ajisteman klète
The LED display brightness is fully adjustable from 0-100%. Use the rotary dimmer switch (located on the side/rear) to set your preferred brightness level. This allows for comfortable viewlajounen kou lannwit.
Image: The alarm clock display at different brightness settings, illustrating the full dimming range.
Limyè lannwit
The alarm clock features a night light at the rear. To turn it on or off, lightly touch the "SNOOZE/NIGHT LIGHT" button on the top of the clock. This provides a soft, ambient light.
Pò chaje USB ak Kalite-C
The alarm clock is equipped with both a USB (5V/1A) and a Type-C (5V/1A) output port. These ports allow you to conveniently charge two digital devices, such as your smartphone or smartwatch, simultaneously.
Image: The alarm clock providing power to a smartphone and a tablet via its integrated charging ports.
Antretyen
To clean the alarm clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish. Keep the device away from excessive moisture and direct sunlight.
Depanaj
| Pwoblèm | Solisyon |
|---|---|
| Ekspozisyon an vid. | Ensure the power adapter is securely plugged into both the clock and a working electrical outlet. If using battery backup, the display will be blank during a power outage, but the alarm function will still work. |
| Alam lan pa sonnen. | Check if the alarm is activated (Alarm 1 or Alarm 2 indicator should be visible on the display). Verify the alarm volume is not set to the lowest level. Ensure the time is set correctly for AM/PM. |
| Pa ka mete lè/alam. | Follow the time/alarm setting instructions carefully. Ensure you are pressing the correct buttons ("TIME/DST", "ALARM 1", "ALARM 2") and using the "+" or "-" buttons for adjustment. |
| Pò chaje yo pa fonksyone. | Confirm the clock is connected to AC power. The charging ports require the main power supply to function. Check the charging cables for damage. |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | PPLEE |
| Nimewo Modèl | CR1023 |
| Kalite ekspozisyon | dirije |
| Sous pouvwa | Corded Electric and Battery Backup |
| Sovgad batri | 2 x AAA (for settings memory only) |
| Chaje pò | 1 x USB 5V/1A, 1 x Type-C 5V/1A |
| Kalite Alam | Doub Alam |
| Volim Alam | 7 Nivo (50dB a 120dB) |
| Duration Snooze | 9 minit |
| Ekspozisyon klète | 0-100% reglabl |
| Dimansyon | 1.77" lajè x 3.03" wotè |
| Pwa atik | 9.9 ons |
Garanti ak sipò
PPLEE provides an 18-month warranty, 12-month replacement, and 3-month refund policy for this product. For any questions or technical support, please contact the seller directly.
Ou kapab tou al gade manyèl itilizatè ofisyèl la an PDF pou plis enfòmasyon detaye:
Videyo pwodwi
PPLEE Digital Alarm clock with Big LED Number for Bedroom
Videyo sa a bay yon souview of the PPLEE Digital Alarm Clock, highlighting its large LED display and suitability for bedrooms.
