DIGITEN TTC-1003 Reptile Temperature Controller User Manual

1. Entwodiksyon

The DIGITEN TTC-1003 is a versatile 3-stage outlet temperature controller designed for precise environmental management. It features two temperature-controlled outlets and one timer-controlled outlet, allowing for independent regulation of heating, cooling, and lighting cycles. This device is suitable for a wide range of applications, including reptile habitats, incubators, greenhouses, mushroom cultivation, and home brewing. This manual provides detailed instructions for the safe and effective operation of your TTC-1003 controller.

Figure 1: DIGITEN TTC-1003 Temperature Controller

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Asire ekipman pou pouvwa a voltage matches the specifications of the controller (100-240V AC).
• Do not immerse the main controller unit in water or expose it to excessive moisture. The temperature probes are waterproof, but the main unit is not.
• Always unplug the device from the power outlet before cleaning or performing any maintenance.
• Do not exceed the maximum rated current of 15A for the entire unit.
• Kenbe aparèy la lwen timoun ak bèt kay.
• Do not disassemble or modify the controller. Refer all servicing to qualified personnel.
• Ensure all connected appliances are in good working condition and do not exceed the controller's wattage limit.

3. Pwodwi souview

3.1 Eleman

• DIGITEN TTC-1003 Controller Unit
• 2 x Temperature Sensor Probes (2m / 78.74in each)
• Power Cord (1.4m / 55.12in)

3.2 Karakteristik kle

• Fasil pou itilize: Plug-and-play design with a large LCD display.
• Kontwòl Endepandan: Two temperature-controlled outlets (OUT1, OUT2) and one timer-controlled outlet (OUT3) operate independently.
• Lajè ranje tanperati: Regulates and maintains temperatures from 14°F to 248°F (-10°C to 120°C).
• Dual Sensor Probes: Two probes for reliable temperature tracking.
• Day/Night Temperature Control: Allows for different temperature settings for day and night cycles on temperature-controlled outlets.
• Fonksyon distribisyon: Outlet 3 offers a time cycle function for lighting or other timed devices.
• Fonksyon memwa: All settings are saved in the event of a power outage.
• Chanjman Inite Tanperati: Chanje fasilman ant Sèlsiyis (°C) ak Farennayt (°F).
• Alam Tanperati Segondè/Ba: Provides alerts for temperature deviations.

Figure 2: Key Features of the TTC-1003

4. Enstriksyon Enstalasyon

4.1 Plasman Inisyal

1. Choose a dry, stable location for the controller unit, away from direct sunlight or heat sources.
2. The unit can be wall-mounted using the integrated hanging slot on the back.

Figure 3: Wall-Mounted Installation

4.2 Connecting Probes and Devices

1. Plug the two temperature sensor probes into the designated ports on the top of the controller.
2. Position the sensor probes in the environment where temperature monitoring is required. Ensure they are not directly exposed to heating elements or water if not intended.
3. Plug your heating or cooling devices into OUT1 and OUT2. These outlets are temperature-controlled.
4. Plug your lighting or other timed devices into OUT3. This outlet is timer-controlled.
5. Plug the controller's power cord into a standard electrical outlet. The LCD display will illuminate.

Figi 4: Egzample Applications and Connections

5. Operasyon Enstriksyon

The controller features a large LCD display and three buttons: SET, LÒJ, ak Flèch ANWO/ANBA.

5.1 Mete Lè Aktyèl la

1. Peze epi kenbe la LÒJ button for 3 seconds until the hour digit flashes.
2. Sèvi ak la Flèch ANWO/ANBA pou ajiste lè a.
3. Peze LÒJ ankò pou ale nan chif minit la, answit ajiste ak Flèch ANWO/ANBA.
4. Peze LÒJ pou konfime ak sòti.

5.2 Temperature Control (Outlets 1 & 2)

Outlets 1 and 2 are independently controlled for temperature. Each can be set for heating or cooling mode with specific ON/OFF temperatures and operating times.

1. Peze epi kenbe la SET button for 3 seconds to enter programming mode. The display will show 'OUT1' or 'OUT2' and the first setting will flash.
2. Sèvi ak la Flèch ANWO/ANBA to select 'OUT1' or 'OUT2'. Press SET pou konfime.
3. Mete lè limen an: The 'ON' time will flash. Use Flèch ANWO/ANBA pou mete lè a, apre sa peze SET to set minutes. This is the time when temperature control for this outlet begins.
4. Mete lè pou fèmen: The 'OFF' time will flash. Use Flèch ANWO/ANBA pou mete lè a, apre sa peze SET to set minutes. This is the time when temperature control for this outlet ends.
5. Set ON Temperature: The 'ON Temp' will flash. Use Flèch ANWO/ANBA to set the temperature at which the connected device turns ON.
6. Set OFF Temperature: The 'OFF Temp' will flash. Use Flèch ANWO/ANBA to set the temperature at which the connected device turns OFF.
7. Determine Mode (Heating/Cooling):
   • If ON Temp < OFF Temp: The controller operates in Mòd chofaj. The device turns on when the temperature drops to ON Temp and turns off when it reaches OFF Temp.
   • If ON Temp > OFF Temp: The controller operates in Mòd refwadisman. The device turns on when the temperature rises to ON Temp and turns off when it reaches OFF Temp.
8. Peze SET to cycle through additional settings (High Alarm, Low Alarm, Calibration) or press LÒJ pou sove ak sòti.

Figure 5: Temperature Control Programming Example

5.3 Timer Control (Outlet 3)

Outlet 3 operates as a simple timer, allowing for two independent ON/OFF periods within a 24-hour cycle.

1. Peze epi kenbe la SET button for 3 seconds to enter programming mode.
2. Sèvi ak la Flèch ANWO/ANBA to select 'OUT3'. Press SET pou konfime.
3. Set First ON Time: The 'ON' time for the first period will flash. Adjust with Flèch ANWO/ANBA epi konfime ak SET.
4. Set First OFF Time: The 'OFF' time for the first period will flash. Adjust with Flèch ANWO/ANBA epi konfime ak SET.
5. Repete etap pou yo Second ON Time epi Second OFF Time if a second timed period is desired. If not, set the second ON time to be the same as the second OFF time to disable it.
6. Peze LÒJ pou sove ak sòti.

Figure 6: Timer Control Programming Example for Outlet 3

5.4 Seleksyon Inite Tanperati (°C/°F)

To switch between Celsius and Fahrenheit, briefly press the Flèch MOUTE button while in normal operating mode.

5.5 High/Low Temperature Alarms (AH/AL)

You can set high and low temperature alarms for Outlets 1 and 2 to be notified if the temperature goes outside your desired range.

1. Enter programming mode for OUT1 or OUT2 (as described in 5.2).
2. After setting ON/OFF temperatures, press SET until 'AH' (High Alarm) flashes. Use Flèch ANWO/ANBA to set the desired high temperature limit.
3. Peze SET until 'AL' (Low Alarm) flashes. Use Flèch ANWO/ANBA to set the desired low temperature limit.
4. Peze LÒJ pou sove ak sòti.

6. Antretyen

Regular maintenance ensures the longevity and accuracy of your DIGITEN TTC-1003 controller.

• Netwayaj: Wipe the controller unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
• Swen Sonde: Periodically inspect the temperature probes for any signs of damage or wear. Ensure the probes are clean for accurate readings. The probes are waterproof and can be cleaned with a damp twal.
• Depo: If storing the device for an extended period, unplug it and store it in a cool, dry place.

Figure 7: Waterproof Temperature Probe

NAN. Depanaj

If you encounter issues with your controller, refer to the table below for common problems and solutions.

8. Espesifikasyon

9. Garanti ak sipò

9.1 Pwodwi Garanti

DIGITEN provides a one-year warranty for any quality problems with this product. Please retain your proof of purchase for warranty claims.

9.2 Sipò pou Kliyan

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact DIGITEN customer support. You can find contact information and additional resources by visiting the official DIGITEN store:

Visit the DIGITEN Store on Amazon