1. Entwodiksyon
Thank you for choosing the WORKPRO Cabinet Jack Support Pole. This adjustable telescopic support rod is designed to provide a reliable third hand for various home improvement and construction tasks. With a robust steel construction and a capacity of 154 lbs (70 kg), it is ideal for cabinet installation, drywall lifting, crown molding, and securing cargo. This manual provides essential information for safe and effective use of your support poles.
Image: Two WORKPRO Cabinet Jack Support Poles and a black carrying bag.
2. Enfòmasyon sou Sekirite
- Always ensure the support pole is placed on a stable, level surface.
- Do not exceed the maximum load capacity of 154 lbs (70 kg) for vertical support or 66 lbs (30 kg) for 45-degree angled support.
- Verify that the locking pins are fully engaged and the quick release lever is securely tightened before applying load.
- Mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye tankou linèt sekirite ak gan.
- Kenbe men ak dwèt ou lwen pati k ap deplase yo pandan ajisteman an.
- Inspect the pole for any damage or wear before each use. Do not use if damaged.
- Lè yo lageasing a loaded pole, do so slowly and with caution to prevent sudden drops.
3. Pake kontni
Your WORKPRO Cabinet Jack Support Pole package includes:
- 2 x WORKPRO Cabinet Jack Support Poles (54-114 inches)
- 1 x pote sak
- Additional non-slip PVC pads (if included with your model)
4. Pwodwi souview
The WORKPRO Cabinet Jack Support Pole features a robust design for versatile use. Key components include:
- Galvanized Adjusting Solid Bar: Provides strength and corrosion resistance for height adjustments.
- Heavy Duty Steel Tube: The main body of the pole, ensuring durability.
- Rotating Head with Non-slip Pads: The base and top pads can rotate 360° and tilt 45° for flexible positioning and secure grip.
- Levier lage rapid: For fine adjustments and quick retraction.
- Bouton fèmen: Secures the pole at the desired height.
- Spring-loaded Lock Pins: For coarse height adjustments.
Image: Diagram illustrating the pole's dimensions (54-114 inches) and key material components.
Pad ki pa glise
Manch ergonomique
Quick Release levye
Spring-loaded Lock
5. Enstriksyon pou enstalasyon ak operasyon
Follow these steps to properly set up and operate your WORKPRO Cabinet Jack Support Pole:
- Step 1: Loosen the Locking Knob. Rotate the red locking knob counter-clockwise to loosen it.
- Step 2: Adjust Coarse Height. Press the two spring-loaded pins on the inner tube to release the lock. Slide the inner tube to approximately the desired height. Ensure the red line mark on the inner tube aligns with the hole on the outer tube to locate the pins easily.
- Step 3: Fine-tune Height and Secure. Lift the quick release lever upwards to allow the upper bar to extend. Position the pole under the object to be supported. Once the pole is at the correct height, re-tighten the red locking knob clockwise until secure.
- Step 4: Apply Final Pressure. Squeeze the handle repeatedly until the pad is firmly fixed under the supported load, providing the necessary pressure.
- Pou lage: Lift the quick release lever upwards. The upper bar will retract, releasing presyon an.
Image: Step-by-step visual instructions for adjusting and securing the support pole.
Image: Detail of the red line mark for pin alignment.
Konsèy Itilizasyon:
- The support pole base and top pads can be rotated 360° and tilted up to 45° to accommodate various angles and surfaces.
- For vertical support (90°), the maximum load is 154 lbs (70 kg).
- For angled support (45°), the maximum load is 66 lbs (30 kg).
Image: Illustration of vertical and angled support capabilities and load limits.
Image: Worker using the pole for drywall installation, showcasing the textured non-slip pads.
6. Antretyen
- Netwayaj: Wipe down the poles with a clean, damp cloth after each use to remove dust and debris. Avoid abrasive cleaners.
- Lubrifikasyon: Periodically apply a light lubricant to the sliding parts and quick release mechanism to ensure smooth operation.
- Depo: Store the poles in their carrying bag in a dry, clean environment to prevent rust and damage.
- Enspeksyon: Regularly check all components, including the pads, pins, and lever, for signs of wear, bending, or damage. Replace any damaged parts immediately.
Image: Carrying bag for convenient storage and transport.
NAN. Depanaj
- Pole not extending/retracting smoothly: Check for debris in the tubes. Apply a light lubricant to the sliding surfaces. Ensure the locking knob is fully loosened.
- Pole not holding position: Ensure the locking knob is fully tightened and the quick release lever is engaged. Verify that the spring-loaded pins are correctly seated in the adjustment holes. Do not exceed the maximum load capacity.
- Pads slipping: Ensure the pads are clean and free of grease or oil. Use the additional PVC pads for enhanced grip on smooth surfaces. Verify the load is centered on the pads.
- Difficulty finding pins: Align the red line mark on the inner tube with the holes on the outer tube to easily locate the spring-loaded pins.
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | W004709 |
| Ranje Wotè reglabl | 54 - 114 pous (137 - 290 santimèt) |
| Materyèl | Steel, Aluminum (handle) |
| Maximum Vertical Load Capacity (90°) | 154 liv (70 kg) |
| Maximum Angled Load Capacity (45°) | 66 liv (30 kg) |
| Dimansyon pwodwi | 54 x 7.87 x 3.15 pous (repliye) |
| Pwa atik | 15.62 pounds (per pole) |
| Kantite pake | 2 poto |
9. Garanti ak sipò
WORKPRO products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official WORKPRO website. If you encounter any issues or require assistance, please contact WORKPRO customer support through their official channels.
Pou plis enfòmasyon oswa sipò, tanpri vizite Magazen WORKPRO sou Amazon.
