HOROW HR-T16SD Smart Toilet with Heated Bidet User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new HOROW HR-T16SD Smart Toilet with Heated Bidet. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Pwodwi Features

• Integrated Bidet System: Features instant warm water technology and air-mixed wash for a comfortable experience.
• Syèj twalèt chofe: Adjustable temperature with four settings for personalized comfort. The seat heats upon sensing a user and enters an energy-saving mode when unoccupied.
• Dual Flush System: Offers water conservation with a small flush (1 GPF) activated by foot induction and a full flush (1.27 GPF) via a knob.
• Pre-Wet Function: Automatically sprays water onto the inner surface of the ceramic bowl when a user is seated, creating a water film to aid in thorough waste flushing.
• Konsepsyon san tank: Provides a sleek, modern aesthetic and saves space.
• Kouvèti ki byen fèmen: Prevents slamming for quiet operation and increased durability.
• Limyè lannwit: Integrated lighting for convenience in low-light conditions.
• Kontwòl Remote: Full control over wash functions, water temperature, seat temperature, and other settings.

3. Enfòmasyon sou Sekirite

Always follow local plumbing and electrical codes during installation. Ensure the power outlet is properly grounded. Do not attempt to repair the unit yourself; contact qualified service personnel. Disconnect power before performing any maintenance or cleaning. Avoid using abrasive cleaners or harsh chemicals that may damage the toilet's surface or internal components.

4. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

Figure 1: Included components for installation. This includes the user manual, flange, wrench, battery, adapter, wax ring, angle valve, control, and screws for the flange.

• Manyèl itilizatè (x1)
• Flange (x1)
• Kle (x1)
• Batri (x1)
• Adaptè (x1)
• Bag sir (x1)
• Angle Valve (x1)
• Control (Remote) (x1)
• Screws for Flange (set)
• Hose, Installation Accessories

5. Enstalasyon

Professional installation is recommended due to the weight and complexity of the unit. Ensure the installation area meets all requirements before proceeding.

5.1 Preparasyon Sit

• Clean the ground thoroughly and ensure it is dry.
• Check if the ground is horizontal using a level.
• Ensure the sewer pipe is unobstructed.
• Measure the rough-in distance; it should be at least 12 inches.
• Verify water pressure (over 0.14Mpa) and flow rate (over 18L/min).

5.2 Angle Valve Installation

• Wrap the raw material belt (Teflon tape) around the threads of the angle valve.
• Install the angle valve onto the water supply line.
• Drain any residual water from the supply line.
• Reinstall the constant flow valve into the angle valve.

5.3 Toilet Mounting

• Lift the upper half of the toilet to access the base.
• Install the expansion screws into the floor drain.
• Mount the flange at the drain, securing it with the screws.
• Place the wax ring onto the toilet's drain opening.
• Carefully position the smart toilet, aligning the flange and screws with the bottom of the toilet. Confirm the center of the drain hole.
• Install the flat washer and nut to secure the toilet to the floor.
• Settle the upper part of the toilet onto the base.

5.4 Koneksyon Dlo ak Elektrisite

• Connect the water inlet pipe (braided tube) to the angle valve. Pay attention not to bend the braided tube.
• Open the angle valve to the maximum and check for any water leaks.
• Power on the toilet by plugging it into a grounded electrical outlet.

6. Operasyon Enstriksyon

Your HOROW HR-T16SD Smart Toilet offers various functions for enhanced comfort and hygiene. Most functions are controlled via the included remote control or integrated sensors.

Figure 2: The remote control and the manual flush knob on the side of the toilet.

6.1 Fonksyon kontwòl Remote

Kontwòl remote la pèmèt ou pèsonalize eksperyans ou:

• Rear Wash / Oscillating: Activates the rear bidet wash, with an oscillating option.
• Front Wash / Oscillating: Activates the front bidet wash, with an oscillating option.
• Flush: Initiates a flush cycle.
• Strong / Weak: Adjusts the water pressure for washing.
• Devan / dèyè: Adjusts the nozzle position for washing.
• Sispann: Halts any active bidet or drying function.
• Tanperati dlo: Adjusts the water temperature for the bidet.
• Otomatik Flush: Activates automatic flushing after use.
• Pouvwa: Vire inite a sou / sou.
• Tanperati Syèj: Adjusts the heated seat temperature.
• Netwaye bouch: Initiates a self-cleaning cycle for the bidet nozzle.
• Ekonomize pouvwa: Aktive mòd ekonomize enèji a.

6.2 Fonksyon Otomatik

• Foot Induction Flush: A small flush (1 GPF) can be activated by foot induction.
• Pre-Wet: The toilet bowl automatically sprays water when a user is seated.
• Kouvèti ki byen fèmen: The toilet lid closes slowly and quietly to prevent slamming.
• Limyè lannwit: The integrated night light provides illumination in the dark.

Figure 3: The bidet nozzle in action, illustrating the instant warm water washing feature.

Figure 4: The elongated heated seat, showing its adjustable temperature capability.

Figure 5: The pre-wet function in action, ensuring a cleaner bowl with each use.

7. Antretyen

Regular cleaning and maintenance will ensure the longevity and optimal performance of your smart toilet.

• Netwaye eksteryè a: Sèvi ak yon mou, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals.
• Netwayaj bouch: Use the 'Nozzle Clean' function on the remote control for automatic cleaning. For manual cleaning, gently pull out the nozzle and wipe with a soft cloth and mild soap.
• Antretyen filtè: Periodically check and clean the water inlet filter to prevent blockages and maintain water flow.
• Pouvwa Off: If the toilet will not be used for an extended period, unplug it from the power outlet.

Figure 6: The self-cleaning and hygienic features of the bidet nozzle.

NAN. Depanaj

If you encounter issues with your smart toilet, refer to the following common troubleshooting steps:

• Pa gen pouvwa: Tcheke si kòd kouran an byen branche nan yon priz ki fonksyone. Asire w ke disjonktè a pa sote.
• Pa gen koule dlo: Verify that the angle valve is fully open. Check the water inlet filter for any clogs. Ensure sufficient water pressure.
• Bidet Not Working: Confirm the remote control batteries are functional. Ensure the seat sensor is activated (you must be seated for bidet functions to operate).
• Pwoblèm Flushing: Check for any obstructions in the bowl. Ensure the water supply is adequate.
• Heated Seat Not Working: Verify the seat temperature setting on the remote. Allow a few minutes for the seat to heat up after activation.

Pou pwoblèm ki pèsiste, tanpri kontakte sèvis kliyan.

9. Espesifikasyon

Figure 7: Dimensions of the HOROW HR-T16SD Smart Toilet.

10. Garanti ak sipò

HOROW is committed to providing quality products and excellent customer service. If you encounter any issues or have questions regarding your HR-T16SD Smart Toilet, please do not hesitate to contact us through your Amazon order page. Our dedicated team is available to assist you and ensure a smooth experience.

Figure 8: HOROW Customer Service team ready to assist.