1. Entwodiksyon
Thank you for choosing the WORKPRO 3.6V Electric 2-in-1 Staple Gun and Brad Nailer. This tool is designed for various fastening tasks, including upholstery, material repair, woodworking, decoration, furniture, and DIY projects. It is compatible with JT21 staples and BN18 brad nails. Please read this manual thoroughly before operation to ensure safe and efficient use.
Image 1.1: WORKPRO Electric Staple Gun and Brad Nailer with included fasteners and USB cable.
2. Enstriksyon Sekirite
Toujou swiv prekosyon sekirite debaz yo pou diminye risk pou blese pèsonèlman oswa domaje zouti a.
- Li tout enstriksyon yo: Familyarize w ak fonksyònman zouti a ak karakteristik sekirite li yo anvan w itilize li.
- Pwoteksyon je: Toujou mete pwoteksyon pou je ki apwopriye (linèt sekirite) lè w ap itilize zouti a.
- Pwoteksyon men: Wear gloves to protect hands from potential hazards.
- Zòn travay: Kenbe zòn travay la pwòp, byen limen, epi pa gen obstak.
- An sekirite pou pyès travay la: Ensure the material being worked on is stable and secured.
- Triple Safety Mechanism: The tool features three safety switches. It will only fire when the ON button is activated, the trigger is pressed, and the contact safety device is fully depressed against the workpiece.
- Kouran koupe lè yo pa itilize: Always turn off the power switch (position "O") when the tool is not in use, during loading/unloading, or during maintenance.
- Evite surchof: To prevent damage, do not exceed 30 shots per minute. Allow a 1-minute break for every 100 nails fired.
- Correct Fasteners: Only use 1/4"-9/16" JT21 staples and 5/8" 18GA BN18 nails. Using incorrect fasteners (e.g., T50 staples) can damage the tool.
- Not for Hardwoods: This tool is not suitable for professional carpentry or nailing hardwoods.
3. Pake kontni
Verifye ke tout atik yo prezan nan pakè a:
- 1 x WORKPRO 3.6V Electric 2-in-1 Staple Gun and Brad Nailer
- 1000 x JT21 Staples (1/4"-9/16")
- 1000 x BN18 Brad Nails (5/8" 18GA)
- 1 x USB Charger Kab
4. Karakteristik ak konpozan pwodwi yo
Familiarize yourself with the different parts of your electric staple gun/nailer.
Image 4.1: Labeled components of the WORKPRO Electric Staple Gun, including LED indicator, charge port, ON/OFF switch, trigger, contact safety, nail viewer window, and quick release magazine.
- ON / OFF switch: Controls the power to the tool.
- Endikatè ki ap dirije: Displays charging status (Red for low power/charging, Green for full charge/shooting).
- Pò chaj: Pou konekte kab chaje USB a.
- Deklanche: Activates the firing mechanism when safety conditions are met.
- Contact Safety Device: Zouti a dwe peze kont pyès travay la pou li ka tire.
- Zong Viewer Window: Allows checking the remaining fastener level.
- Quick Release Magazine: For loading staples and nails.
5. Enstalasyon
5.1 Chaje batri a
The electric staple gun is powered by a 3.6V Lithium-Ion battery. Ensure the tool is fully charged before first use.
- Connect the provided USB charging cable to the charge port on the tool.
- Connect the other end of the USB cable to a 5V DC power source (e.g., mobile phone charger, computer USB port, power bank).
- Endikatè LED la ap montre Wouj pandan chaje.
- Charging typically takes 1-2 hours. The LED indicator will turn Vèt lè konplètman chaje.
- A full charge can fire up to 1000 nails/staples.
Image 5.1: Illustration of fast charging capability (1-2 hours) using a 5V DC power source.
Image 5.2: Information on battery capacity (2000mAh 3.6V) and shots per full charge (800-1000).
5.2 Loading Staples and Nails
Ensure the power switch is in the "O" (OFF) position before loading fasteners.
Imaj 5.3: Plis paseview of compatible fasteners: JT21 Staples (1/4"-9/16") and 18GA Brad Nails (5/8").
- Pull out the magazine cover: Locate the quick release magazine at the bottom of the tool and pull out its cover.
- Chaje Staples: Place JT21 staples into the magazine with their points facing upwards.
- Chaje Klou yo: Place BN18 nails into the loading side of the magazine with their points facing upwards.
- Close the magazine cover: Push the magazine cover back until it locks securely into place.
Image 5.4: Visual guide for loading fasteners: pulling out the magazine, placing staples with points up, placing nails with points up, and closing the magazine.
Image 5.5: Emphasizes placing staples with points upwards.
6. Opere Zouti a
Follow these steps to operate your WORKPRO Electric Staple Gun/Brad Nailer safely and effectively.
- Vire sou pouvwa: Slide the ON/OFF switch to the "I" (ON) position. The LED indicator will turn green if the battery has sufficient charge.
- Pozisyon zouti a: Place the contact safety device firmly against the surface of the object where you intend to fasten.
- Squeeze the Trigger: While maintaining firm contact with the workpiece, squeeze the trigger to fire a staple or nail.
- Monitor Fastener Level: Sèvi ak klou a viewer window to check the remaining fasteners and reload as needed.
- Apre itilizasyon: Always slide the ON/OFF switch to the "O" (OFF) position when you have finished using the tool or before performing any adjustments or maintenance.
Image 6.1: Illustrates the three steps for safe operation: Power Switch On, Press Contact Safety Device Down Completely, and Squeeze the Trigger to Shoot.
6.1 Aplikasyon Rekòmande
This tool is suitable for various light to medium-duty fastening tasks:
- Upholstery projects
- Material repair (e.g., fabric, paper, leather)
- Woodworking with softwood products
- Decorative tasks
- Asanblaj ak reparasyon mèb
- General DIY projects
Imaj 6.2: Egzanpamples of proper use, including pet house construction, DIY wood products, photo frame assembly, and upholstery.
7. Antretyen
Antretyen regilye asire lonjevite ak pèfòmans optimal zouti ou a.
- Netwayaj: Keep the tool clean and free from dust and debris. Use a dry cloth to wipe down the exterior.
- Depo: Store the tool in a dry, cool place, away from direct sunlight and moisture. Ensure the power switch is OFF.
- Swen batri: Do not store the tool with a completely discharged battery for extended periods. Charge it periodically if not in use.
- Magazin Fastener: Periodically check the magazine for any obstructions or bent fasteners that could cause jamming.
- Evite twòp itilizasyon: Adhere to the recommended firing rate (no more than 30 shots per minute, with a 1-minute break every 100 shots) to prevent motor overheating and potential damage.
NAN. Depanaj
Si ou rankontre pwoblèm, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Zouti pa tire | Bouton pouvwa a OFF Batri egzeyate Contact safety not fully depressed Magazine is empty Fastener jam | Limen switch pouvwa a Chaje batri a Press tool firmly against workpiece Reload fasteners Clear any jammed fasteners (ensure power is OFF) |
| Fasteners do not fully penetrate | Incorrect fastener type Working on hardwood Ba chaj batri | Ensure correct JT21 staples or BN18 nails are used This tool is not for hardwoods; use on softwoods Chaje batri a konplètman |
| Zouti bloke souvan | Incorrect fastener type Bent or damaged fasteners Magazine not properly closed Firing too rapidly | Use only specified fasteners Inspect fasteners before loading Ensure magazine is securely locked Adhere to recommended firing rate (max 30 shots/min) |
| Batri pa chaje | USB cable or charger faulty Charge port obstructed | Try a different USB cable or 5V DC charger Check charge port for debris |
9. Espesifikasyon
Technical details for the WORKPRO Electric Staple Gun and Brad Nailer.
Image 9.1: Visual representation of the tool's dimensions and key specifications.
- Modèl: W125177AE
- Sous pouvwa: 3.6V Lithium-Ion Battery (2000mAh)
- Chaje Voltage: 5V DC
- Tan pou chaje: 1-2 èdtan
- Max Shots per Charge: 800-1000
- Max Shot Rate: 30 shots/minute (with 1-minute break every 100 shots)
- Agraf konpatib: JT21 (1/4"-9/16" / 6-14mm)
- Compatible Nails: BN18 (5/8" 18GA / 15mm)
- Pwa atik: 1.76 liv (0.8 kg)
- Dimansyon pwodwi: 5.71"L x 5.67"W x 0.1"H (approximately 14.5cm x 14.4cm)
- Materyèl: Acrylonitrile Butadiene styrene
- Koulè: Gri
10. Garanti ak sipò
For warranty information or technical support, please refer to the documentation included with your purchase or contact WORKPRO customer service. Keep your purchase receipt as proof of purchase.
