OREiN 2-in-1 Bathroom Exhaust Fan with Light

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN 2-in-1 Bathroom Exhaust Fan with Light. This unit is designed to provide efficient ventilation and illumination for your bathroom, helping to reduce humidity and odors. Please read this manual thoroughly before installation and use, and retain it for future reference.

Image 1.1: The OREiN 2-in-1 Bathroom Exhaust Fan with Light, showcasing konsepsyon elegant li yo ak ekleraj entegre li yo.

2. Pwodwi Features

• Vantilasyon pwisan: Operates at 100 Cubic Feet Per Minute (CFM) to effectively remove moisture and odors from your bathroom.
• Operasyon trankil: Engineered for quiet performance with a sound level of 1.5 Sones, ensuring minimal disturbance.
• Entegre ekleraj dirije: Features a bright 1500 lumen LED light for ample lumière.
• 3-Color Temperature Selectable (3CCT): Choose between 3000K (soft white), 4000K (bright white), or 5000K (daylight) to match your preference. The color temperature is selected via a toggle switch on the fan housing.
• Fonksyon Nightlight: Includes a 2200K nightlight for low-level illumination in the dark. Activate by cycling the light switch within 2 seconds.
• DC Motor with Slow Start/Stop: Equipped with a durable DC motor that features a slow start and slow stop mechanism to protect the motor and extend its lifespan.
• Enstalasyon fasil: Designed with a fast bracket for secure and straightforward installation between ceiling joists or directly to a joist.
• Konstriksyon dirab: Made from metal and plastic components for long-lasting use.
• Sètifikasyon: FCC and ETL Listed, ensuring compliance with safety and performance standards.

Image 2.1: Illustration of the 3-color temperature selectable feature (3000K, 4000K, 5000K) for the integrated LED light.

Image 2.2: Visual representation of the dimmable 3CCT light (19W, 1500LM) and the 200LM nightlight, with instructions for cycling the light switch to change modes.

3. Enfòmasyon sou Sekirite

Pou diminye risk pou dife, chòk elektrik, oswa blesi sou moun, obsève bagay sa yo:

• Travay enstalasyon ak fil elektrik dwe fèt pa moun ki kalifye (yo) an akò ak tout kòd aplikab ak estanda, ki gen ladan kòd konstriksyon dife-rated ak estanda.
• Pou yon bon konbisyon ak pou gaz yo ka soti nan chemine ekipman ki boule gaz la, fòk gen ase lè. Swiv gid ak estanda sekirite manifakti ekipman chofaj la tankou sa Asosyasyon Nasyonal Pwoteksyon Kont Dife (NFPA) pibliye, Sosyete Ameriken pou Enjenyè Chofaj, Refrijerasyon ak Èkondisyone (ASHRAE) ansanm ak otorite kòd lokal yo.
• Lè koupe oswa perçage nan miray oswa plafon, pa domaje fil elektrik ak lòt sèvis piblik kache.
• Fanatik konduit yo dwe toujou ayere deyò.
• Pa sèvi ak fanatik sa a avèk nenpòt aparèy kontwòl vitès solid.
• Inite sa a dwe chita.
• Pa enstale nan yon zòn pou kwit manje.
• This product is designed for general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
• Pou evite domaj motè kote yo pote ak roues ki fè bwi ak/oswa dezekilib, kenbe espre klwazon sèch, pousyè konstriksyon, elatriye koupe inite pouvwa.
• The fan is suitable for use in a shower or tub enclosure when installed in a GFCI protected branch circuit.

4. Pake kontni

Tanpri verifye sa ki nan pake a pou asire w tout pyès yo prezan e yo pa domaje:

• OREiN 2-in-1 Bathroom Exhaust Fan with Light Unit
• Mounting Bracket (Fast Bracket)
• Installation Hardware (screws, wire connectors)
• Manyèl Itilizatè (dokiman sa a)

5. Enstriksyon Enstalasyon

Before beginning installation, ensure power is turned off at the circuit breaker. It is recommended to have a qualified electrician perform the installation.

5.1 Dimansyon ak Egzijans

• Dimansyon Lojman: 7.68" x 7.55" x 6.42" (L x W x H)
• Light Cover Size: 10.1" x 10.1"
• Ceiling Opening Size: 8.11" x 7.48"
• Gwosè kanal: 4 pous (wonn)

Image 5.1: Detailed product dimensions and required ceiling opening size for installation.

5.2 Monte Lojman Vantilatè a

1. Identify the desired location for the fan. Ensure there is sufficient space in the ceiling cavity and access to an existing or new ducting system.
2. Cut a ceiling opening of 8.11" x 7.48".
3. Attach the fast bracket to the fan housing.
4. Mount the fan housing between ceiling joists using the fast bracket, or nail/screw it directly to a joist. Ensure the housing is securely fastened and flush with the ceiling surface.
5. Connect the 4-inch ductwork to the fan's exhaust port. Ensure the duct does not bend into the opening to block the damper. Use rigid or semi-rigid ducting for optimal performance.

Image 5.2: Step-by-step visual guide for installing the fan housing and light cover.

5.3 Fil elektrik

All wiring must comply with local electrical codes. Ensure power is OFF before wiring.

1. Remove the wiring cover from the fan housing.
2. Connect the household wiring to the fan's wiring using appropriate wire connectors.
3. Konekte fil tè a.
4. Ensure all connections are secure. Replace the wiring cover.

Image 5.3: Electrical wiring diagrams for single and dual switch configurations. Note the warning about ducting not blocking the damper.

5.4 Attaching the Light Cover

1. Once the housing is installed and wired, connect the light fixture's electrical connector to the receptacle inside the fan housing.
2. Carefully push the light cover into the ceiling opening until the mounting springs engage and hold it securely in place.

6. Operasyon Enstriksyon

6.1 Selecting Light Color Temperature (3CCT)

The fan's LED light offers three color temperature options: 3000K (soft white), 4000K (bright white), and 5000K (daylight).

• To select your desired color temperature, locate the toggle switch on the back of the fan housing (before final installation of the light cover).
• Slide the switch to the corresponding setting for 3000K, 4000K, or 5000K.
• Once set, the light will operate at this color temperature when turned on.

6.2 Using the Nightlight Function

The fan includes a 2200K nightlight feature.

• To activate the nightlight mode, quickly turn the light switch OFF and then ON again within 2 seconds.
• The light will switch to the nightlight mode.
• To return to the main light mode, repeat the OFF-ON cycle.

7. Antretyen

Regular maintenance helps ensure optimal performance and extends the lifespan of your exhaust fan. Always disconnect power before performing any maintenance.

7.1 Cleaning the Light Cover and Grille

• Gently pull down the light cover to detach it from the housing springs.
• Wipe the light cover and grille with a damp cloth using a mild, non-abrasive cleaning solution.
• Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Ensure the cover is completely dry before reattaching.

7.2 Cleaning the Fan Motor and Blades

• With the light cover removed and power disconnected, carefully vacuum or wipe dust and debris from the fan motor and blades.
• Pa plonje motè a nan dlo.
• Ensure no foreign objects are obstructing the fan blades.

Image 7.1: Diagram showing the internal components of the exhaust fan, including the DC motor, check valve, lampshade, and wind wheel (fan blades).

NAN. Depanaj

If you experience issues with your OREiN exhaust fan, refer to the following table for common problems and solutions.

Image 8.1: Visual comparison showing a bathroom before and after effective steam removal by the exhaust fan.

9. Espesifikasyon

10. Garanti ak sipò

OREiN products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official OREiN websit.

For technical support, troubleshooting assistance, or warranty claims, please contact OREiN customer service:

• Kontakte: Chèche pou "OREiN" online or contact through the Amazon platform.
• Telefòn: 1(844)506-1530 (24-Hour Service)

Please have your model number (OL17002) and purchase information ready when contacting support.

Image 10.1: OREiN customer service contact information for support inquiries.