Elitech LMG-10 Digital HVAC Manifold Gauge and SVP-7 Intelligent HVAC Vacuum Pump User Manual

Entwodiksyon

This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of the Elitech LMG-10 Digital HVAC Manifold Gauge and the Elitech SVP-7 Intelligent HVAC Vacuum Pump. These tools are designed for professional HVAC applications, offering precision and ease of use for various tasks including pressure monitoring, vacuum testing, and refrigerant management.

Enfòmasyon sou Sekirite

Always read and understand all safety warnings and instructions before operating the LMG-10 and SVP-7. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Asire w ke tout koneksyon an sekirite anvan operasyon an.
• Do not operate in flammable environments.
• Mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye, tankou linèt sekirite ak gan.
• Refer to local regulations for refrigerant handling and disposal.
• Dekonekte kouran an anvan ou fè nenpòt antretyen oswa netwayaj.

Pwodwi konpozan ak plis paseview

Elitech LMG-10 Digital HVAC Manifold Gauge

• Ekran LCD: Displays pressure, temperature, and other operational data.
• Bouton kontwòl: For mode selection, navigation, zeroing, and power.
• Sight Glass: Allows visual inspection of refrigerant flow.
• Valv kontwòl: Regulate refrigerant flow.
• Refrigerant Hose Fittings: Connection points for refrigerant hoses.
• Refrigerant Hose Brackets: For organizing hoses.
• Temperature Probe Port: For connecting temperature clamps.

Elitech SVP-7 Intelligent HVAC Vacuum Pump

• Inlet lè: Point of entry for air/refrigerant vapor.
• Fenèt lwil oliv: Pèmèt enspeksyon vizyèl nivo ak kondisyon lwil la.
• Ekspozisyon ekran: Shows vacuum status and operational data.
• Motè: Powers the pump mechanism.
• Plòg drenaj lwil oliv: For draining used vacuum pump oil.
• Manch: Pou portabilite.
• Valv solenoid: Controls vacuum flow and prevents backflow.
• Tank lwil oliv: Reservoir for vacuum pump oil.

Enstalasyon

Initial Setup of LMG-10 Digital Manifold Gauge

1. Debake: Carefully remove the LMG-10 from its packaging. Inspect for any damage.
2. Enstalasyon batri: Open the battery compartment on the back of the unit. Insert the required batteries, ensuring correct polarity. Close the compartment securely.
3. Pouvwa sou: Peze epi kenbe bouton pouvwa a pou limen inite a.
4. Zewo: Before use, ensure the manifold gauge is zeroed according to the instructions in the operating section.

Initial Setup of SVP-7 Intelligent HVAC Vacuum Pump

1. Debake: Carefully remove the SVP-7 from its packaging. Inspect for any damage.
2. Ranpli lwil oliv: The SVP-7 comes with vacuum pump oil. Locate the oil fill port and fill the pump with the provided oil to the indicated level on the oil window. Do not overfill.
3. Koneksyon pouvwa: Konekte kòd kouran an nan yon priz elektrik ki apwopriye. Asire w ke vòl latage koresponn ak egzijans ponp lan.
4. App Download (Optional but Recommended): Download the "Elitech Tools" app from the App Store (iOS) or Google Play Store (Android) for enhanced control and monitoring features.

Enstriksyon Operasyon

Using the LMG-10 Digital Manifold Gauge

1. Konekte kawotchou: Connect the appropriate refrigerant hoses to the LMG-10 fittings and to the HVAC system ports (low side, high side, and vacuum/refrigerant tank).
2. Power On and Zero: Turn on the LMG-10. Press the "ZERO" button to calibrate the pressure sensors to atmospheric pressure before connecting to a system.
3. Mezi Tanperati: Attach the temperature clamps to the refrigerant lines to measure superheat and subcooling. The readings will display on the LCD screen.
4. Siveyans Presyon: The LCD screen will display real-time pressure readings for both high and low sides, along with corresponding saturation temperatures.
5. Seleksyon mòd: Use the "MODE" button to cycle through different measurement units (e.g., psi, kPa, bar) or display modes.

Using the SVP-7 Intelligent HVAC Vacuum Pump

1. Connecting to System: Connect the vacuum pump to the HVAC system via the manifold gauge or directly to the system's vacuum port.
2. Pouvwa sou: Press the power button on the SVP-7 to start the pump.
3. Monitoring Vacuum: The SVP-7's display screen will show the current vacuum level. For precise monitoring, use the Elitech Tools app.
4. Entelijan kontwòl: The pump features intelligent control of the motor and solenoid valve, which will open or close instantly according to the motor status, optimizing the evacuation process.
5. Vacuum Leakage Test: The SVP-7 can monitor the process of pressure holding and vacuum leakage test precisely with temperature compensation. Refer to the app for detailed leakage test procedures.
6. Fèmen: Once the desired vacuum level is achieved, close the system valves, then turn off the pump. Disconnect hoses carefully.

App Integration (Elitech Tools App)

The Elitech Tools App allows for remote control and detailed monitoring of both the LMG-10 and SVP-7. Key features include:

• Kontwòl motè: Remotely start and stop the SVP-7 vacuum pump.
• Data Logging & Exporting: Record and export vacuum and pressure data over time.
• Mòd alam: Set up alerts for specific pressure or vacuum thresholds.
• Vacuum Graph Display: Visualize vacuum changes in real-time.
• Siveyans Tanperati: View temperature readings from the LMG-10.
• Historical Data Checking: Access past operational data for analysis.

To connect, ensure Bluetooth is enabled on your mobile device and follow the in-app pairing instructions.

Antretyen

LMG-10 Digital Manifold Gauge Maintenance

• Netwayaj: Siye inite a avèk yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Depo: Store the LMG-10 in a dry, cool place when not in use. Remove batteries if storing for extended periods to prevent leakage.
• Kalibrasyon Capteur: Periodically check and recalibrate the pressure sensors as needed, especially if accuracy issues are suspected.

SVP-7 Intelligent HVAC Vacuum Pump Maintenance

• Tcheke nivo lwil oliv: Regularly check the oil level through the oil window. Maintain the oil level between the MIN and MAX marks.
• Chanjman lwil oliv: Change the vacuum pump oil regularly, especially after each major job or if the oil appears cloudy or discolored. To change oil, drain old oil via the oil drain plug and refill with new, clean vacuum pump oil.
• Netwayaj: Keep the exterior of the pump clean. Ensure air vents are free from obstructions.
• Depo: Store the SVP-7 in a dry, well-ventilated area.

Depanaj

Espesifikasyon

Garanti ak sipò

Elitech products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Elitech website. For technical support, troubleshooting assistance, or service inquiries, please contact Elitech customer service.

Manifakti: Elitech

Websit: www.elitech.com

Enfòmasyon pou kontakte: Refer to the Elitech websit la oswa anbalaj pwodwi a pou jwenn enfòmasyon kontak ki pi resan yo.