Byron Wireless Doorbell Kit DBY-22321NP

Entwodiksyon

Thank you for choosing the Byron Wireless Doorbell Kit DBY-22321NP. This kit provides a reliable and convenient solution for your home or office, featuring a wireless range of up to 150 meters, 16 selectable melodies, and adjustable volume control. This manual will guide you through the installation, operation, and maintenance of your new doorbell system to ensure optimal performance and longevity.

Enfòmasyon sou Sekirite

• Li tout enstriksyon yo ak anpil atansyon anvan enstalasyon ak itilize.
• Do not expose the units to extreme temperatures, direct sunlight, or excessive moisture.
• Use only the specified battery types. Ensure correct polarity when inserting batteries.
• Kenbe pil yo pa rive jwenn timoun yo. Si vale, chèche swen medikal imedya.
• Pa eseye ouvri oswa repare aparèy yo tèt ou. Konfye tout antretyen bay pèsonèl kalifye.
• Dispose of old batteries and electronic waste responsibly according to local regulations.

Kontni pake

Tanpri verifye sa ki nan pake a pou asire w tout atik yo la:

• 1x Wireless Doorbell Chime Unit (Receiver)
• 1x Wireless Push Button (Transmitter)
• Mounting hardware (screws, wall plugs, adhesive pad)
• Batteries (for push button, and possibly for chime if battery-operated)
• Manyèl Itilizatè (dokiman sa a)

Figure 1: Main components of the Byron Wireless Doorbell Kit.

Enstalasyon ak Enstalasyon

1. Enstale pil

For the Push Button (Transmitter):

1. Gently pry open the back cover of the push button unit.
2. Insert the supplied battery (e.g., CR2032 lithium battery) into the battery compartment, ensuring correct polarity (+/-).
3. Fèmen kouvèti dèyè a byen.

For the Chime Unit (Receiver):

The chime unit may be battery-operated or plug-in. If battery-operated, open the battery compartment on the back and insert the required batteries (e.g., 3x AA batteries), observing polarity. If plug-in, simply plug it into a standard wall outlet.

Figi 2: Dèyè view of the chime unit and push button, illustrating battery compartments and mounting options.

2. Enstalasyon bouton pouse a

Choose a suitable location near your entrance, away from direct metal surfaces which can interfere with the wireless signal. The push button is typically weather-resistant (IP44 rated).

• Sèvi ak vis: Mark the desired mounting holes, drill pilot holes if necessary, and secure the push button using the provided screws and wall plugs.
• Using Adhesive Pad: Clean the mounting surface thoroughly. Peel off the protective film from the adhesive pad and firmly press the push button onto the surface for at least 30 seconds.

3. Pozisyonman Inite Klòch la

Place the chime unit in a central location within your home where the sound can be easily heard. Consider the maximum wireless range of 150 meters. Avoid placing it near large metal objects or other electronic devices that might cause interference.

Figure 3: Close-up of the push button, showing the clear nameplate cover.

4. Pairing (if necessary)

Most Byron doorbell kits come pre-paired. If your chime does not ring when the push button is pressed, you may need to pair them:

1. On the chime unit, locate the pairing button (often a small button inside the battery compartment or on the side).
2. Press and hold the pairing button for a few seconds until an indicator light flashes or a sound is heard.
3. Within 10 seconds, press the push button. The chime unit should ring, indicating successful pairing.
4. Si koupi echwe, repete pwosesis la.

Enstriksyon Operasyon

1. Chanje Melodi

Your doorbell kit offers 16 different melodies. To change the melody:

• Locate the melody selection button on the chime unit. This is often a small button on the side or front.
• Press the button repeatedly to cycle through the available melodies. The chime will play each melody as you select it.
• Stop pressing when you hear your desired melody. It will be saved automatically.

Figi 4: Side view of the chime unit, indicating the location of control buttons.

2. Ajiste Volim

To adjust the volume level of the chime unit:

• Locate the volume control button on the chime unit. This might be a dedicated button or integrated with the melody selection.
• Press the button to cycle through different volume levels (e.g., High, Medium, Low, Mute).
• Select the volume level that best suits your needs.

Antretyen

• Netwayaj: Siye inite yo ak yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
• Ranplasman batri:
  • If the push button stops working or its range decreases, replace the battery (e.g., CR2032).
  • If the chime unit's sound becomes weak or it stops ringing (and it's battery-operated), replace its batteries (e.g., AA).
  • Always replace all batteries at the same time and ensure correct polarity.
• Pwoteksyon anviwònman: Pa jete aparèy elektrik yo kòm fatra minisipal ki pa klase. Sèvi ak enstalasyon koleksyon separe. Kontakte gouvènman lokal ou a pou enfòmasyon konsènan sistèm koleksyon ki disponib yo.

Depanaj

Espesifikasyon

Garanti ak sipò

Byron products are manufactured to high quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package or visit the official Byron websit la pou wè tèm ak kondisyon garanti detaye yo.

For technical support, troubleshooting assistance, or to inquire about spare parts, please contact Byron customer service through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (DBY-22321NP) and purchase details ready.

Ou ka jwenn plis enfòmasyon ak sipò nan: www.byron.com