Entwodiksyon
This manual provides detailed instructions for the safe and effective use of your EverBrite LED Motion Sensor Night Light. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Karakteristik pwodwi
- Capteur mouvman sansib: Automatically detects motion and illuminates. The light will turn off after 15-25 seconds of no motion, conserving battery life.
- Optimal Brightness & Coverage: Each unit features 5 built-in LED lamp beads, providing 30 lumens of cool white light. Offers a lighting distance of up to 16 feet and a 125-degree sensing area.
- Enstalasyon versatile: Three primary installation methods are supported: magnet adsorption, adhesive stick-on, and hanging with a lanyard.
- Enèji efikas: Designed to activate only in low-light conditions when motion is detected, minimizing power consumption. Powered by AAA batteries.
- Aplikasyon lajè: Ideal for various indoor locations such as stairs, kitchens, hallways, bathrooms, bedrooms, basements, corridors, cloakrooms, and baby rooms.
Kontni pake
Verifye ke tout atik yo prezan nan pakè ou a:
- EverBrite LED Motion Sensor Night Light units (6-pack)
- AAA Batteries (18 count)
- Lanyards (for hanging installation)
- Adhesive Iron Sheets (for stick-on installation)
Enstriksyon Enstalasyon
1. Enstalasyon batri
- Gently twist and remove the light cover to access the battery compartment.
- Insert three (3) AAA batteries into the compartment, ensuring correct polarity (+/-).
- Replace the light cover by aligning and twisting it securely until it clicks into place.

Image: Easy Battery Installation. This image illustrates the three steps for installing batteries: removing the cover, inserting AAA batteries, and closing the cover.
2. Montaj Opsyon
Choose the most suitable installation method for your desired location:
- Magnet Adsorption: The night light has a built-in magnet. Simply attach it to any ferrous metal surface.
- Stick On: For non-metal surfaces, use the provided adhesive iron sheets. Peel the backing from an adhesive sheet and firmly press it onto a clean, dry surface. Then, attach the night light to the iron sheet via its magnet.
- Pann: Utilize the included lanyard. Thread the lanyard through the designated loop on the night light and hang it from a hook or similar fixture.

Image: Three Installation Methods. This image displays the magnet adsorption, stick-on, and hanging options for mounting the night light.
Enstriksyon Operasyon
The EverBrite LED Motion Sensor Night Light is designed for automatic operation:
- Aktivasyon otomatik: The integrated motion sensor detects movement within its 125-degree sensing angle and up to 16 feet distance. The light will only activate in dark environments when motion is detected.
- Dezaktivasyon otomatik: After motion ceases, the light will remain on for approximately 15-25 seconds before automatically turning off to conserve battery power.

Image: Sensitive Motion Sensor. This image demonstrates the 16-foot detection distance and 125-degree sensing angle of the night light.
Antretyen
- Netwayaj: Wipe the surface of the night light with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Ranplasman batri: When the light dims or fails to activate, replace all three AAA batteries with new ones. Refer to the "Battery Installation" section for instructions.
- Depo: Si w ap sere limyè lannwit lan pou yon peryòd tan pwolonje, retire pil yo pou anpeche flit ak domaj potansyèl.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | 1. Batteries are depleted or incorrectly installed. 2. Ambient light is too bright. 3. No motion detected within range. | 1. Replace batteries or check polarity. 2. Ensure the environment is dark enough for activation. 3. Move closer to the sensor or check sensor's line of sight. |
| Limyè rete limen kontinyèlman. | 1. Constant motion within sensor range. 2. Capteur fonksyone byen. | 1. Ensure no continuous motion is present. Reposition the light if necessary. 2. If problem persists, contact customer support. |
| Limyè fèb. | Batri yo ba. | Replace all three AAA batteries. |
Espesifikasyon
| Spesifikasyon | Detay |
|---|---|
| Nimewo Modèl | E007089 |
| Sous limyè | 5 dirije lamp beads per unit |
| Klète | 30 Lumen |
| Koulè limyè | Cool Blan |
| Mouvman Sensor Range | Jiska 16 pye (apeprè 5 mèt) |
| Sensing Angle | 125 degre |
| Tan Auto-off | 15-25 seconds (after no motion) |
| Sous pouvwa | 3 x AAA batteries per unit (18 included for 6-pack) |
| Materyèl | Plastik |
| Dimansyon (chak inite) | 3.18"D x 3.18"W x 0.88"H |
| Pwa (chak inite) | 1.76 ons |
| Itilizasyon Anviwònman | Andedan kay la sèlman |
| Rezistans dlo | Pa reziste dlo |

Image: Product Size and Features. This image provides a visual representation of the night light's dimensions and highlights its main specifications.
Enfòmasyon sou Sekirite
- This product is for indoor use only. Do not expose to rain, moisture, or extreme temperatures.
- Pa melanje ansyen ak nouvo pil, oswa diferan kalite pil.
- Jete pil yo itilize yon fason responsab selon règleman lokal yo.
- Kenbe lwen timoun piti pou evite risk toufe ak ti pyès oswa pil.
- Do not attempt to disassemble or modify the product, as this will void the warranty and may cause damage or injury.
Garanti ak sipò
Warranty information for your EverBrite LED Motion Sensor Night Light is typically provided with your purchase or can be found on the official EverBrite website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided at the point of purchase or on the manufacturer's official websit.
Pwodwi adisyonèl Views




Videyo pwodwi
Pa gen okenn videyo ofisyèl pwodwi ki enpòtan nan men vandè a ki te jwenn nan done yo bay pou entegre nan manyèl sa a.





